products in Oil, Gas & Mining

APCM

APCM DA 4080

APCM DA 4080 is 200°F cure modified epoxy prepreg system which can be prepreged on fiberglass fabric, woven Kevlar, or other woven fabrics. In addition to their low temperature cure capabilities, DA 4080 prepregs have excellent flow to allow for vacuum bag cure conditions. DA 4080 is a one sided pre-impregnated system yielding a single sided tack material. DA 4082 is the same system except that both sides of the fabric are coated yielding a double sided tack material. Both prepregs can be used for laminating and honeycomb sandwich construction.

Polynt Group

Polynt Group BMC LS 388/20 C GRIGIO

Polynt Group BMC LS 388/20 C Grigio is generally used in industrial sector applications.

Polynt Group

DISTITRON® 1629 V2

DISTITRON® 1629 V2 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce reinforced plastics,general purpose through injection molding,rtm,press and vacuum molding method.

Polynt Group

NORSODYNE® 2625

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

Huber Engineered Materials

Geotex® 10-20

Geotex® 10-20 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

PCC Chemax

PCC Chemax Dodecylphenol

PCC Chemax Dodecylphenol is a dense, viscous, light yellow liquid with a characteristic phenolic odor. It is a mixture of isomers containing mainly para-dodecylphenol. Dodecylphenol is difficult to dissolve in water and is very soluble in aliphatic alcohols, ketones, esters and aliphatic hydrocarbons.

Esti Chem

ESTILUBE P688

ESTILUBE P688 is based on short-chain saturated pentaerythritol and selected mono and di-carboxylic acid and is available in varying viscosity ranges. Again, ‘narrow cut’ fatty acid are selected to obtain a superior product quality. ESTILUBE P688 is low carbon residue when heated, extraordinary oxidation stability.

Polynt Group

DISTITRON® 429 ESX20Q

DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.

PCC Chemax

GREENLINE™ Caustic Soda lye 50% Solution

GREENLINETM Soda Lye (50% aqueous solution) belongs to inorganic chemical compounds from the hydroxide group. The product is manufactured in an environmentally friendly production process based on membrane technology, which is currently the most modern technology in the world. Membrane technology uses significantly less energy compared to other methods for obtaining sodium hydroxide. In addition, the energy consumed in the production of GREENLINETM Soda Lye is covered by guarantees of origin of energy from renewable energy sources. These guarantees are issued only for energy produced from renewable sources, contributing to a significant reduction in CO2 emissions into the atmosphere.

Polynt Group

DISTITRON® 429 V8

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

PCC Chemax

SULFOROKAnol L225/1 (Sodium Laureth Sulfate)

SULFOROKAnol L225/1 (Sodium Laureth Sulfate) is an anionic surfactant of the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is available as an approximately 26% aqueous solution in color from colorless to light yellow, pH close to neutral and low viscosity at room temperature. These properties make it easier to pump, dose and mix the product with other components. The microbiological purity of SULFOROKAnol L225 / 1 is ensured by the addition of a preservative.

Huber Engineered Materials

Hubercarb® M200

Hubercarb® M200 is a medium fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. The M200 particle distribution offers a wide range of applications from carpet backing to cleansers, joint compounds to PVC flooring, concrete to oilfield drilling fluids where its low acid insoluble content is useful

Huber Engineered Materials

Hubercarb® M300

Hubercarb® M300 is an medium-fine ground calcium carbonate produced from a uniform, high calcium limestone deposit in Marble Falls, Texas. Carefully controlled particle distribution allows M300 to be used a wide range of applications including paints, coatings, adhesives, caulks, and concrete building products. Acid solubility above 92% and location make M300 ideal for use in oilfield drilling fluids.

Huber Engineered Materials

Geotex® 16-40

Geotex® 16-40 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance.

Dynasol Elastomers

Paracril™ BJLT-M30

Paracril BJLTM30 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Polynt Group

DISTITRON® 514 Z1

DISTITRON® 514 Z1 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

Polyumac

Polyumac Air-Cell T-200

Polyumac Air-Cell T-200 is a hybrid, closed cell cross-linked polyester foam core that is an economical alternative to other cores used in the production of sandwich composite structures. In addition to its excellent strength to weight ratio, it offers good dimensional stability at elevated temperatures.

Huber Engineered Materials

Geotex® 30-50

Geotex® 30-50 is a high purity, granular calcium carbonate produced from a high brightness marble deposit in Georgia with a controlled particle distribution. In applications needing high brightness material such as plaster and stuccos, Geotex has outstanding performance. The marble crystal structure is useful in recirculation drilling fluids.

Quantum Composites

HTC™ 9593

HTC™ 9593 is a chopped carbon fiber reinforced ESC® molding compound. It is easily moldable and provides parts that are high strength, fatigue resistant, with high heat resistance and a low density. The carbon fiber is standard modulus PAN based 3K tow.

Polynt Group

EPOVIA OPTIMUM® KRF-3100

Epovia Optimum® KRF-3100 is bisphenol-A epoxy vinyl ester resin for pultrusion with low foaming, fast cure and it is generally used in industrial sector applicatons.

Ergon, Inc.

Ergon, Inc. HY P40

This severely hydrotreated mineral oil has a very low aromatic content, excellent solvency, and excellent color with resistance to discoloration by heat or ultraviolet light.

Polynt Group

NORSODYNE® PT-100KCI

Norsodyne® PT-100KCI - isophthalic-neopentylglycol resin for pultrusion, water resistance. Main applications areas are building and construction, industrial sector etc.

Polynt Group

ENYDYNE® I 68871 A

ENYDYNE® I 68871 A - Unsaturated polyester resin in styrene,DCPD. It is mainly used in hand lay up and spray up,injection molding,RTM etc.

Zoltek

ZOLTEK™ PX35 CHOPPED FIBER (TYPE-48)

ZOLTEK’s Type-48 chopped fibers provide excellent mechanical and electrical properties for reinforcement in thermoplastic molding compounds requiring high strength and modulus, low density, electrical conductivity, dimensional stability, low thermal expansion and excellent friction/wear properties.

Zoltek

ZOLTEK™ PX35 CHOPPED FIBER (TYPE-65)

ZOLTEK’s Type-65 chopped fiber format has high bulk density values which allow for cleaner and more consistent flow rates and maintains its integrity from the package, into, and through the hopper and distributes easily during compounding, improving process and product performance and has excellent mechanical and electrical properties.

Grupa Azoty S.A

Tarnamid® T- 27 CF30

Tarnamid® T- 27 CF30 is a 30% carbon fiber reinforced polyamide 6 compound, heat stabilized, good conductive and electrostatic properties.

Zoltek

ZOLTEK™ PX35 UD500

ZOLTEK PX35 Stitch-Bonded Uni-Directional Carbon Fabrics are produced from our ZOLTEK PX35 50K Continuous Tow Carbon Fiber. Unique fiber spreading techniques are utilized to obtain a wide range of UD fabric weights for a varied set of composite part applications. Quick composite part build-up is cost effectively achieved with our diverse weight range of low-cost carbon fabric products.

Polynt Group

NORSODYNE® R 56372 TAE

NORSODYNE® R 56372 TAE - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks through continuous laminating method.

Polynt Group

EPOVIA OPTIMUM® EP KRF 1101 TA

EPOVIA OPTIMUM® EP KRF 1101 TA - Bisphenol-A Epoxy Resin based vinyl ester,without styrene. It is used to produce pipes and tanks through continuous laminating method.

Polynt Group

OPTIPLUS 040-8094

OPTIPLUS 040-8094 - Unfilled tooling resin,thixotropic,preaccelerated,low profile. It is generally used in Industrial sector applicatons

Polynt Group

DISTITRON® VEef 220 V4

DISTITRON® VEef 220 V4 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce reinforced plastics,general purpose through injection molding,rtm,press and vacuum molding method.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 500,000 cSt

XIAMETER(TM) PMX-200 Silicone Fluid 500,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt

XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt is a high-viscosity polydimethylsiloxane polymer manufactured to yield essentially linear polymers in a wide range of viscosities. The viscosities generally used in formulating polishes are in the range of 100 to 30,000 cSt. It is preferable to use a blend of a low-viscosity fluid and a high-viscosity fluid (e.g. 3 parts XIAMETER(TM) PMX- 200 Silicone Fluid 100 cSt and 1 part XIAMETER(TM) PMX-200 Silicone Fluid 12,500 cSt) to obtain optimum results in terms of ease of application and depth of gloss. The low-viscosity silicone fluid acts as a lubricant to make polish application and rubout easier, whereas the high-viscosity silicone fluid produces a greater depth of gloss. Since these polymers are inherently water-repellent, they will cause water to bead up on a treated surface rather than penetrate the polish film.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 600,000 cSt

XIAMETER(TM) PMX-200 Silicone Fluid 600,000 cSt is a high-viscosity polydimethylsiloxane polymer that is primarily used for foam control in nonaqueous processes. In petroleum processing, it provides effective foam control at extremely low dosage levels. This product is also suitable for use in personal care applications. The high-molecular-weight dimethicone provides easy combing and detangling for wet or dry hair and adds softness, smoothness, and gloss.

BTC Europe GmbH

Oppanol® N 50 Easy-Peel

Instant Deal AvailablePlastic Bags: 6.40EUR/KG EXW (MOQ: 20KG)Request a Quote to access the deal now. Terms & Conditions for Instant Deals An Instant Deal is a time limited price indication for a selective product. Prices and information displayed for Instant Deals do not constitute a binding offer from BTC but are just an opportunity for the customer to request an offer. The contractual partner responsible for the order processing is the related local BASF Unit in the country of the respective sold-to party. For the DACH region it is the BTC Monheim GmbH. The price is calculated as base price without freight and logistic costs, which are added in a next step depending on quantity and place of delivery. A final price offer needs to be requested with the button "request a quote"; Incoterms are CPT; we do not deliver below the respective MOQ; we do not commit on any volumes - "only as long as stock last"; we only sell and deliver to sold-to and ship-to companies within our RTC core reaions in Furone.

BTC Europe GmbH

Basocorr™ PP

Basocorr™ PP serves as a corrosion inhibitor designed for oil and gas applications, particularly in well stimulation processes within exploration and upstream operations. This liquid-form product is tailored to inhibit corrosion in various industrial settings within the oil and gas industry.