products in Other Industrial Applications: Pipes

Sino Polymer

Sino Polymer MFE 711

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

Peter Greven

LIGAFLUID MG 25/N

Peter Greven

LIGASTAR ZN 101

Sidh Masterbatches

Sidh Masterbatches Black Master batch S505

Sidh Masterbatches Black Master Batch S505 provide economical coloring & improve the U.V. stability & weathering properties in polyolofin applications. It offers a wide range of economy series to special blacks covering applications like ducts & water pipes, rotomoulding, films down to 20 microns, injection moldings & compounding. Black Master Batch S30 SBP 2710 has 25% of Carbon Black Content. The carbon loading percentage ranges from 25% to 50% and has good dispersion in the polymer base. For maximum U.V. protection, the final product should contain 2.5% of carbon black and accordingly, the let down ratio depending on the percentage of carbon black.

Peter Greven

LIGASTAR ZN 104 G

Vycom CPG International

Hitec® HDPE

Hitec® HDPE is a versatile material for use in a wide variety of applications and industries. It has excellent impact strength, scratch and chemical resistance, stiffness, and minimal moisture absorption.

S&E Polymer Solutions

S&E Polymer Solutions V-TEM 80

S&E Polymer Solutions V-TEM 80 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

Vycom CPG International

Protec® CoPP

Protec® CoPP provides high levels of impact and corrosion resistance. It’s a great material for tank fabrication, orthotic and prosthetic devices, and many more applications.

Silon

TABOREN® PH 42 T 20-990

TABOREN® PH 42 T 20-990 is a PP homopolymer, Filler: Mineral filler, Stabilization: Basic antioxidant

Boruta-Zachem SA

Boruta-Zachem SA Pigment Red R

Boruta-Zachem SA Pigment Red R is C.I. Pigment Red 254 which is used as pigments for plastics.

Boruta-Zachem SA

Boruta-Zachem SA Iron Oxide Beige GR

Boruta-Zachem SA Iron Oxide Beige GR is inorganic pigment mixture Mixture which is used as pigments for plastics.

Esprix Technologies

Ketoprix™ EKT23G3C2L

Ketoprix™ EKT23G3C2L are thermoplastic aliphatic polyketone compounds containing the base 1,4-diketone polymer backbone structure with added fiber reinforcement and thermally conductive additives. Additional thermal stabilizers and lubricants are also added to assist in injection molding.

Sino Polymer

Sino Polymer MERICAN 9406

Peter Greven

LIGACID SG 23

Sidh Masterbatches

Sidh Masterbatches White master batch swp 7070p10

Sidh Masterbatches White Master Batch SWP 7070p10 are the concentrates of titanium dioxide (TIO2) in a polymer carrier. They have perfect dispersion and optimized flow properties resulting to maximum hiding power and easy processing. TIO2 used is RUTILE COATED type, which ensures high opacity, coloring strength, dispersibility and excellent U.V. stability. Certain types contain as filler in form of a fine calcium carbonate that provides economy as well as technical benefits in many applications, especially in injection & blow moldings. White Master Batch SWP 1136 has 10% Titanium dioxide content. For thin films, masterbatches with high content of TIO2 and having the best possible dispersion are preferable. There are certain specially designed grades with additives like anti-stat (for PP thermoformed items), slip (most suitable for LDPE), PPA to reduce die build up, melt fracture & surface defects and U.V. stabilizers.

Camex Limited

Camex Limited Titanium Dioxide (Rutile)

Camex Limited Titanium Dioxide (Rutile) is Applicable to plastics such as masterbatches, color for PVC flooring, PVC pipe, moldings; used in the paint and textile industries.

Tramaco

TRACEL® G 5172 SVA

TRACEL® G 5172 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Sidh Masterbatches

Sidh Masterbatches White master batch swp 1139

Sidh Masterbatches White Master Batch SWP 1139 are the concentrates of titanium dioxide (TIO2) in a polymer carrier. They have perfect dispersion and optimized flow properties resulting to maximum hiding power and easy processing. TIO2 used is RUTILE COATED type, which ensures high opacity, coloring strength, dispersibility and excellent U.V. stability. Certain types contain as filler in form of a fine calcium carbonate that provides economy as well as technical benefits in many applications, especially in injection & blow moldings. White Master Batch SWP 1136 has 10% Titanium dioxide content. For thin films, masterbatches with high content of TIO2 and having the best possible dispersion are preferable. There are certain specially designed grades with additives like anti-stat (for PP thermoformed items), slip (most suitable for LDPE), PPA to reduce die build up, melt fracture & surface defects and U.V. stabilizers.

NUC

NUC DMDJ-6200NT

C4-LLDPE and HDPE are mainly used for seasoning tubes, blown bottles, water supply pipes and various industrial products, which have a good balance of flexibility and processability.

Boruta-Zachem SA

Boruta-Zachem SA Iron Oxide Red B-140

Boruta-Zachem SA Iron Oxide Red B-140 is inorganic C.I. Pigment Red 101 which is used as pigments for plastics.

S&E Polymer Solutions

S&E Polymer Solutions V-TEM 150

S&E Polymer Solutions V-TEM 150 are plasticized polymers with a range of durometers and toughness to meet various material requirements.

Boruta-Zachem SA

Boruta-Zachem SA Pigment Yellow G

Boruta-Zachem SA Pigment Yellow G is C.I. Pigment Yellow 1 which is used as pigments for plastics.

Esprix Technologies

Ketoprix™ EK63

Ketoprix™ EK63 and EKT63 resins are thermoplastic aliphatic polyketones containing a 1,4-diketone backbone structure. They are produced from ethylene, propylene and CO with perfectly alternating olefin and CO monomers in the backbone.

Camex Limited

Camex Limited Polyethylene Wax

Camex Limited Polyethylene Wax, also known as Polymer wax, short for Polyethylene Wax, is widely used because of its excellent property of cold / heat / chemical and abrasion resistance. In normal production, this part of wax can be directly added to the polyolefin processing as an additive; it can increase the gloss and processing performance.

Esprix Technologies

Ketoprix™ EKT33G3L

Ketoprix™ EKT33G3L are thermoplastic aliphatic polyketone compounds where the polyketone base polymer consists of perfectly alternating α-olefins and CO to give the 1,4-diketone polymer backbone structure. To this base resin, fiber reinforcement, additional thermal stabilizers and lubricants are added to achieve desired mechanical performance and to assist in injection molding.

HaloPolymer

HaloPolymer PTFE FLUOROPLAST-4 grade PN20

HaloPolymer PTFE Fluoroplast-4 grade PN20 (F-4PN20) is fully fluorinated resin which has an excellent chemical stability, electrical and mechanical properties. The material is a granular powder product designed for usage from small to medium billet compression molding, which is well suited to thin skived film applications requiring excellent physical and electrical properties.

Tramaco

TRACEL® G 5193 SVA

TRACEL® G 5193 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Sidh Masterbatches

Sidh Masterbatches White master batch swp 6090s

Sidh Masterbatches White Master Batch SWP 6090s are the concentrates of titanium dioxide (TIO2) in a polymer carrier. They have perfect dispersion and optimized flow properties resulting to maximum hiding power and easy processing. TIO2 used is RUTILE COATED type, which ensures high opacity, coloring strength, dispersibility and excellent U.V. stability. Certain types contain as filler in form of a fine calcium carbonate that provides economy as well as technical benefits in many applications, especially in injection & blow moldings. White Master Batch SWP 1136 has 10% Titanium dioxide content. For thin films, masterbatches with high content of TIO2 and having the best possible dispersion are preferable. There are certain specially designed grades with additives like anti-stat (for PP thermoformed items), slip (most suitable for LDPE), PPA to reduce die build up, melt fracture & surface defects and U.V. stabilizers.

Boruta-Zachem SA

Boruta-Zachem SA Pigment Green B

Boruta-Zachem SA Pigment Green B is C.I. Pigment Green 8 which is used as pigments for plastics.

Sidh Masterbatches

Sidh Masterbatches White master batch swp 11051

Sidh Masterbatches White Master Batch SWP 11051 are the concentrates of titanium dioxide (TIO2) in a polymer carrier. They have perfect dispersion and optimized flow properties resulting to maximum hiding power and easy processing. TIO2 used is RUTILE COATED type, which ensures high opacity, coloring strength, dispersibility and excellent U.V. stability. Certain types contain as filler in form of a fine calcium carbonate that provides economy as well as technical benefits in many applications, especially in injection & blow moldings. White Master Batch SWP 1136 has 10% Titanium dioxide content. For thin films, masterbatches with high content of TIO2 and having the best possible dispersion are preferable. There are certain specially designed grades with additives like anti-stat (for PP thermoformed items), slip (most suitable for LDPE), PPA to reduce die build up, melt fracture & surface defects and U.V. stabilizers.

Sidh Masterbatches

Sidh Masterbatches White master batch swp 11053

Sidh Masterbatches White Master Batch SWP 11053 are the concentrates of titanium dioxide (TIO2) in a polymer carrier. They have perfect dispersion and optimized flow properties resulting to maximum hiding power and easy processing. TIO2 used is RUTILE COATED type, which ensures high opacity, coloring strength, dispersibility and excellent U.V. stability. Certain types contain as filler in form of a fine calcium carbonate that provides economy as well as technical benefits in many applications, especially in injection & blow moldings. White Master Batch SWP 1136 has 10% Titanium dioxide content. For thin films, masterbatches with high content of TIO2 and having the best possible dispersion are preferable. There are certain specially designed grades with additives like anti-stat (for PP thermoformed items), slip (most suitable for LDPE), PPA to reduce die build up, melt fracture & surface defects and U.V. stabilizers.

ADD-Chem Germany GmbH

ADD-PA 175

ADD-PA 175 is a flow aid with acrylatischer Eigengleitwirkung. is flow aids used, where one wants to reduce adhesion and adhesion tendency of the melt. Therefore, they are often found in the films and foam industry. Other applications include the bottles, plates, profiles and pipes, industrial.

Boruta-Zachem SA

Boruta-Zachem SA Pigment Violet R

Boruta-Zachem SA Pigment Violet R is C.I. Pigment Violet 3 which is used as pigments for plastics.

Tramaco

TRACEL® G 3191 SVA

TRACEL® G 3191 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.

Boruta-Zachem SA

Boruta-Zachem SA Iron Oxide Green B

Boruta-Zachem SA Iron Oxide Green B is inorganic pigment mixture Mixture which is used as pigments for plastics.

Tramaco

TRACEL® G 5142 SVA

TRACEL® G 5142 SVA is Tramaco's foaming agents for PVC-extrusion are adapted to match diverse stabilizer systems and foaming processes (free foam, celuka, coextrusion). For a consistent dosage our foaming agents are available in various delivery forms and with different active agent content. The foaming agents can be delivered in customized preweighed meltable sachets. Our technical service team is looking forward to give you qualified and solution-oriented advice.