Products in Other Industrial Applications

DiTech Dye is a water-soluble fluorescent yellow dye designed for use in industrial, hard surface, & multipurpose cleaners, foaming car wash soaps and waxes, metal working fluids, antifreeze and coolants, water-based adhesives, water tracing applications, and leak detection applications.

Polyamide Resin C is a PA6/6.6 copolyamide, produced by continuous polymerization process. It is a high viscosity grade suitable for numerous applications. The grade can be used for cast film and blown film (air cooled)..

Color are everywhere in nature, present in every aspect of our life, holding the power to affect our emotions, mood and actions. They are a source of inspiration for art, fashion, design and branding, defining the world around us. In Global Colors we offer a board pallet of vivid and sparkling shades to create the optimal color for your products. Our color masterbatches like MultiTech Masterbatch A delivers consistent quality and add enhanced value to our customers. Apart from the existing colors, a fast and accurate computerized color matching service and develop any new shade a customer may request and provide free of charge samples for testing.

TEGO® Antifoam KS 95 is a self-emulsifying organic antifoam concentrate enhanced with minor amounts of organo-siloxanes for improved efficiency. This antifoam is well-suited for industrial applications, specifically as an anti-foaming agent, and finds utility in various processes including polymerization, wastewater treatment, and suspension polymerization.

TEGO® Antifoam 50 is a highly efficient silicone-based antifoam emulsion that can be easily diluted with water. It serves as an anti-foaming agent and is suitable for managing foam in a range of industrial applications. Classified under industrial additives, this product falls within the category of processing aids, specifically as an other processing additive, and belongs to the silicone chemical family.

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

TAGAT® V 20 is a non-ionic emulsifier that is based on POE-20 glycerol oleoricinoleate. It is a low-foaming emulsifier that finds use in a wide range of applications such as metal working fluids, concrete release agents, textile auxiliary formulations, and pulp and paper defoamers. TAGAT® V 20 is derived from natural raw materials, which makes it dermatologically safe and environmentally friendly. It has excellent emulsifying and stabilizing properties, which ensure the formation of finely dispersed and long-lasting stable oil-in-water emulsions. TAGAT® V 20 also enhances the solubility of biocides in mineral oil-based lubricants and improves the lubricating properties of water-mixed fluids. It has a low foaming tendency and provides excellent thermal stability.

TEGO® Antifoam MR 1015 is a highly efficient 70% active antifoam concentrate that is based on modified siloxanes. Its unique formulation and modification of the active material provide excellent efficiency and maximum compatibility, making it a superior product compared to traditional silicone oil-based antifoams. TEGO® Antifoam MR 1015 eliminates undesirable effects such as silicone spotting and fish eyes in most applications. It is highly stable in alkaline and electrolyte environments, even at higher temperatures. Additionally, TEGO® Antifoam MR 1015 is easily dispersible in water, making it easy to handle. It is an ideal antifoam concentrate for a wide range of applications where maximum compatibility and excellent efficiency are required.

TEGO® Antifoam 1488 is a versatile emulsion-based anti-foaming agent tailored for various applications. It effectively controls foam formation in processes like emulsion polymerization and textile sizing. With good compatibility, it finds use in diverse industrial additives, including metalworking fluids and nonwovens. This emulsion-type additive is available in drums, catering to different production scales. Its performance spans markets like adhesives and sealants, fluids and lubricants, and building materials. TEGO® Antifoam 1488's role in polymer dispersions manufacturing adds to its versatility and value.

Evonik Crosslinker 100, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

TEGO® Antifoam 3062 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

TEGO® Antifoam 2290 is a silicone-free, self-emulsifying antifoam concentrate without any silica. This APEO-free organic antifoam is designed for use as an anti-foaming agent in waterborne adhesive formulations, aligning with eco-friendly labeling claims. Categorized under CASE ingredients within foam control additives.

Evonik Crosslinker 120, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

TEGO® Antifoam 204 is an antifoam emulsion formulated with organo-modified siloxanes. This product functions as an anti-foaming agent, offering good compatibility with industrial processes. It belongs to the Industrial Additives and Materials category within the Construction Chemicals product family and is specifically tailored for use in cement and concrete additives.

REWOQUAT® WE 15 DPG is di-(nor-oleyl carboxyethyl) hydroxyethyl methylammonium methosulfate and can be applied to textiles alone or in combination with other compatible finishing products. It is used for the handling and finishing of textiles made from various fibers, including cellulosic, synthetic, wool, and their blends, as well as a hydrophilic softener for non-wovens.

ZETASPERSE® 3800 dispersant is specifically designed to offer robust stabilization for pigments, fillers, and various solids within aqueous dispersions. This dispersant is based on a comb polymer with a moderate molecular weight, providing strong steric stabilization. Its versatile characteristics make it suitable for a wide array of formulation needs.

TEGO® Antifoam 4-94 is an APEO-free and mineral oil-free emulsion antifoam containing organo-modified siloxanes. This anti-foaming agent is designed for use in waterborne adhesive applications and is particularly compatible with substrates such as paper and wood. It falls within the category of CASE ingredients, specifically within the realm of foam control additives, presenting itself in emulsion form

TEGO® Antifoam 2291 is a silicone-free, self-emulsifying antifoam concentrate without any silica. This APEO-free organic antifoam is designed for use as an anti-foaming agent in waterborne adhesive formulations, aligning with eco-friendly labeling claims. Categorized under CASE ingredients within foam control additives.

Evonik Modifier 705 refers to SiH-terminated polydimethyl siloxanes utilized as plasticizers in addition-curing silicones. Due to their difunctional structure, these products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers reduces crosslinking density and, consequently, the elastomer's hardness.

CARBOWET® GA-100 is a surfactant meticulously crafted through the optimal blend of non-ionic additives. Its purpose is to offer multifaceted advantages in various aqueous formulations, including wetting, stabilization, and compatibilization. This remarkable surfactant excels in providing exceptional low-foam pigment wetting and milling efficiency, all without the typical issues related to water sensitivity, foam generation, and rheological problems commonly associated with APE surfactants. The versatility of CARBOWET® GA-100 extends its performance to a wide spectrum of applications and formulations, where its dynamic wetting capabilities combined with compatibilization and stabilization can yield unique benefits. Importantly, CARBOWET® GA-100 is formulated without added APEs or solvents, making it an easily incorporable liquid additive. Notably, it shines brightest in architectural paint mills, where it delivers its peak performance. 2

ALBIDUR® VE 3940 is a concentrated dispersion, comprising 40% high-performance elastomer within a Bisphenol A epoxy vinyl ester resin. This product serves the essential purpose of enhancing the toughness of vinyl ester resins that would otherwise be brittle. The elastomeric component in use is a specialized silicone rubber, meticulously distributed within the liquid resin as a finely dispersed second phase.

Evonik Crosslinker 110, part of the Crosslinker 100 series, consists of polydimethylsiloxanes containing SiH groups within the polymer chain. In addition to SiH groups within the chain, the Crosslinker 100 series features terminal SiH groups. These crosslinkers are essential components of polyaddition silicones. When working with two-component silicone formulations, it is crucial to maintain strict separation between Pt catalysts (e.g., Catalyst 500 series) and SiH crosslinkers to ensure proper performance.

TEGO® Antifoam 793 is a 100% active defoamer concentrate utilizing polyether-modified siloxanes. It functions as a defoamer primarily in fluids and lubricant applications. Available in liquid form, this product belongs to the chemical family of polyether siloxanes. It is used in various industrial settings, including metalworking fluids, hydraulic oils, and fluids, as well as textile auxiliaries.

Evonik 2-Ethylhexyl Cyanoacetate (2-EHCA) plays a pivotal role as a key building block in the manufacturing of Octocrylene, a highly versatile UV-absorbent. Furthermore, it functions as a stabilizer for other UV-filters, such as Avobenzene. Notably, Octocrylene holds FDA approval, making it one of the select UV-absorbents endorsed for use.

TEGO® Antifoam 1435 is a silicone oil-based defoamer emulsion featuring non-ionic emulsifiers. This product serves as a ready-to-use antifoam solution, ideal for post-defoaming in surfactant-based systems, as well as in applications like printing pastes and non-woven production. TEGO® Antifoam 1435 excels as a silicone oil-free antifoam, efficiently controlling foam with minimal usage, ensuring process effectiveness.

TEGO® Antifoam 2-89 is an antifoam emulsion formulated with organo-modified siloxanes. This product functions as an anti-foaming agent, offering good compatibility with industrial processes. It belongs to the Industrial Additives and Materials category within the Construction Chemicals product family and is specifically tailored for use in cement and concrete additives.

Ketron® Sterra™ CA30 PEEK is a 30% carbon fiber-reinforced grade that exhibits even higher stiffness, mechanical strength, and creep and wear resistance than Ketron GF30 PEEK. With a significantly reduced thermal expansion, optimum load carrying capabilities, and high thermal conductivity rates, Ketron® Sterra™ CA30 PEEK components are often favored for their ability to extend part life and rapidly dissipate heat in bearing applications. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Acetron® C Sterra™ POM-C is a general-purpose copolymer acetal grade that is often favored for its porosity-free nature. Acetron® C Sterra™ POM-C shapes offer low moisture and excellent machinability capabilities, making it a very versatile material that can excel in a multitude of environments. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ DrySlide UHMW-PE is an internally lubricated product. This lubricant is built into the PE-UHMW matrix with a higher molecular weight. It offers a lower coefficient of friction and enhanced wear and abrasion resistance than TIVAR® 1000 PE-UHMW. The additives used also make this material static dissipative and considerably improves UV-resistance. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ UHMW-PE shapes are produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as construction and heavy equipment, agriculture and grain handling, bulk material and parcel handling, automotive, and transportation. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ UHMW-PE is often a favored solution for wear and outrigger pads, strips, rails, and guides, rollers, conveyors, chutes, hoppers, impact plates, and asphalt equipment components. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

TIVAR® Sterra™ ESD UHMW-PE are electrostatic dissipative shapes produced from reprocessed industrial UHMW materials and repurposed for use in a variety of industries, such as agriculture and grain handling, bulk material handling, and parcel handling. As a premium grade that is both economical and eco-friendly, TIVAR® Sterra™ ESD UHMW-PE components exhibit excellent abrasion and corrosion resistance, outstanding impact strength, minimal moisture absorption, and a low coefficient of friction. For these reasons, TIVAR® Sterra™ ESD UHMW-PE is often a favored solution for conveyor, chute, and hopper applications, where electrical charge build-ups are prevalent. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.

Ketron® Sterra™ HPV PEEK shapes are carbon fiber reinforced with graphite and PTFE lubricants. This gives them the lowest coefficient of friction and the best machinability of all PEEK materials. Due to Ketron® Sterra™ HPV PEEK’s combination of low wear, low friction, and high LPV, this grade is often chosen as a solution for service bearings, bushings, insulators, valves, and seals. As part of the Sterra™ product portfolio, this material contains recycled content and exhibits a significantly lower carbon footprint compared to similar materials derived from non-recycled feedstocks.