Products in Other Power, Water & Utilities Applications

Evonik Polymer VS 1000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Modifier 715 is another SiH-terminated polydimethyl siloxane plasticizer for addition-curing silicones. These products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers is intended to decrease crosslinking density, resulting in softer elastomers.

Evonik Polymer VS 200 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

Evonik Polymer VS 10000 consists of vinyl-terminated polydimethylsiloxanes available in different viscosity levels and molecular weights, with an impressively low content of volatile constituents. These polymers serve as fundamental components in silicone formulations that cure through a platinum-catalyzed addition reaction with silicone crosslinkers containing SiH groups. The minimal presence of volatile constituents and the crosslinking mechanism ensure that curing shrinkage remains low, and no volatile or corrosive substances are generated during the curing process.

ALBIFLEX® 246 is an innovative Bisphenol-A-epoxy silicone block copolymer resin designed for crafting high-performance elastomers. This liquid resin, active with epoxy, seamlessly cures when paired with aliphatic and cycloaliphatic epoxy resin curing agents. ALBIFLEX® 246 offers versatility, supporting various casting and molding methods for your manufacturing needs.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

COL-PL800/18 is a Powdered Activated Carbon manufactured by high temperature steam activation and homogenized for consistent performance.

ACOL-PA80 is an acid washed very high activity Pelletised Activated Carbon manufactured by high temperature steam activation from selected grades of anthracite coal.

WSP-95 is a high-performance decoloring powdered Activated Carbon manufactured by chemical activation (phosphoric acid) from selected grades of wood.

ACOC-A50 is a high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell then acid washed and subsequently pH neutralized to improve purity.

Ammonisorb P is an impregnated extruded activated carbon manufactured by steam activation selected grades of coal and then impregnated for treatment of alkaline gasses and fumes.

FLUAC-450S is an impregnated granular Activated Carbon manufactured by high temperature steam activation and homogenized for consistent performance.

COC-Ammonisorb Pis an impregnated activated carbon manufactured by steam activated ion selected grades of coconut shell and then impregnated for treatment of alkaline gasses and fumes.

SL5-L1000 is a high activity Granular Activated Carbon manufactured by high temperature steam activation of selected grades of coconut shell and then chemically impregnated with silver.

COC-L1000 is a high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell.

FLUAC-500 is a free-flowing powdered Activated Carbon manufactured by high temperature steam activation and homogenized for consistent performance.

ACOC-A60 is a very high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell then acid washed and subsequently pH neutralized to improve purity.

SL5-L1200 is a very high activity Granular Activated Carbon manufactured by high temperature steam activation of selected grades of coconut shell and then chemically impregnated with silver.

CU50 is an impregnated Extruded Activated Carbon manufactured by high temperature steam activation from selected grades of coal which is then impregnated with and thermally processed to provide copper oxide (CuO) within the carbon's pore structure.

Mercusorb is an impregnated activated carbon for adsorption of elemental and organic mercury Mercusorbis produced by taking specially manufactured steam activated carbon with an optimized pore diameter and then chemically impregnating with sulfur.

COC-L1200 is a very high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell.

Ammonisorb S is an impregnated extruded activated carbon manufactured by steam activation selected grades of coal and then impregnated for treatment of alkaline gasses and fumes.

SL10-L1000 is a high activity Granular Activated Carbon manufactured by high temperature steam activation of selected grades of coconut shell and then chemically impregnated with silver.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

COL-PA40 is a medium activity Pelletised Activated Carbon manufactured by high temperature steam activation from selected grades of anthracite coal.

WOS-PKS is a Granular Activated Carbon manufactured by high temperature steam activation.

COC-L55 is a high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell.

COC-L900 is a medium activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of coconut shell.

COL PA50 is a high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of anthracite coal.

COL-PA60 is a high activity Granular Activated Carbon manufactured by high temperature steam activation from selected grades of anthracite coal.

SL1-L1000 is a high activity Granular Activated Carbon manufactured by high temperature steam activation of selected grades of coconut shell and then chemically impregnated with silver.

FLUAC-500S is an impregnated free-flowing powdered Activated Carbon manufactured by high temperature steam activation and homogenized for consistent performance.

ACOL-PA70 is an acid washed very high activity Pelletised Activated Carbon manufactured by high temperature steam activation from selected grades of anthracite coal.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.