Products in Power, Water & Utilities

PWT 4816 is a high-charge, very high-molecular-weight anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

H-PAC® 7011S is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids, and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber-lined steel, or polyethylene.

H-PAC® 8021 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids, phosphorus and metals. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

T-Det® EPO 81 is an anhydrous, liquid nonionic surface-active agent produced by the reaction of ethylene oxide and propylene oxide. It is used in petroleum paper manufacture, water treatment, foam control, and agricultural chemicals. Due to its nonionic structure, T-Det® EPO 81 is compatible with anionic and cationic surfactants and is stable in the presence of acids, bases, and salts.

PWT 3175 is a highly effective, single-component solution polymer that is widely used as a cationic organic coagulant in municipal and industrial water and wastewater treatment applications. Its high charge makes it particularly effective in liquid/solid separation systems, such as clarification and dewatering. PWT 3175 may be fed directly from the container or pre-diluted for ease of use.

WWT 3840 HIB is a structured, high-molecular-weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for very high-shear applications such as rotary presses, screw presses, and centrifuges.

WWT 3840 LO is a structured, high-molecular-weight, cationic polyacrylamide in emulsion form. It is used as a flocculant in a variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering. It is well-suited for high-shear applications such as rotary presses, screw presses, and centrifuges.

PWT 3140 is a medium charge, medium molecular weight cationic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

H-PAC® 7012 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

H-PAC® P8020 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

WWT 1082LS is a high charge, high molecular weight anionic polyacrylamide in low solids emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

H-PAC® 4016 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

WWT 3016 HMW is a high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

WWT 3640 MEB is a structured, high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering, and is well suited for higher shear applications, such as rotary presses, screw presses and centrifuges.

H-PAC® 3013 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

PWT 4300 is a low-charge, high-molecular-weight, anionic polyacrylamide in emulsion form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

WWT 3081 is a structured, high molecular weight cationic polyacrylamide in emulsion form, used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering, and is well suited for higher shear applications, such as rotary presses, screw presses and centrifuges.

H-PAC® 8323 is a highly effective cationic coagulant for use in industrial and municipal water and wastewater applications for the removal of turbidity, color, suspended solids and phosphorus. It should be stored and handled in suitable non-corrosive materials such as fiberglass, reinforced plastic, PTFE, PVC/CPVC, rubber lined steel or polyethylene.

LORODAC 4-24 is a fatty alcohol polyethyleneglycol ether, based on NAFOL 1214 and ethylene oxide (about 4 moles). For documents specific to a region, please contact Sasol using the 'Request Document' button.

COSMACOL AES-27-3-24 NE is the sodium salt of linear fatty alcohol C12-14 poly-(3)-ethoxy sulfate. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/79 is based on a primary linear C12-C14 fatty alcohol with approx. 7 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/79 is also available as RSPO-MB grade. The product contains 10% of water to get a clear low viscous product For documents specific to a region, please contact Sasol using the 'Request Document' button.

Cosmacol N-II-9 is a fatty alcohol polyethyleneglycol ether, based on SAFOL 23 alcohol and ethylene oxide (about 9 moles). It is used in personal care. COSMACOL N II-9 is a high performance emulsifier/solubilizer for fragrances and essential oils in water, aqueous-alcoholic mixtures and aqueous surfactant systems, showing no impact on viscosity and foaming properties. For documents specific to a region, please contact Sasol using the 'Request Document' button.

EMULDAC AS-25 is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for hair-dyeing formulations. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 125 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLINAT 242/28 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 145 is primary linear and mono-branched alcohols mixture with alkyl chain length of 14 to 15 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

COSMACOL AES-70-3-24 AL is the sodium salt of linear fatty alcohol C12-14 poly-(3)-ethoxy sulfate. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/99 is based on a primary linear C12-C14 fatty alcohol with approx. 9 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. The product contains 10% water to obtain a clear low viscous product For documents specific to a region, please contact Sasol using the 'Request Document' button.

COSMACOL AES-70-2-24 AL is the sodium salt of linear fatty alcohol C12-14 poly-(2)-ethoxy sulfate. For documents specific to a region, please contact Sasol using the 'Request Document' button.

COSMACOL AES-27-2-24 NE is the sodium salt of linear fatty alcohol C12-14 poly-(2)-ethoxy sulfate. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ALFONIC TDA-7 Ethoxylate is a biodegradable nonionic derived from isotridecyl alcohol and ethoxylated to an average of 7 moles of ethylene oxide. This ethoxylate is essentially 100% active unless diluted with water. It is a clear, colorless liquid. Because it is a low-mole ethoxylate, it is sparingly soluble in water but soluble in hydrocarbons. For documents specific to a region, please contact Sasol using the 'Request Document' button.

WWT 70 is a medium-charge, high-molecular-weight, cationic polyacrylamide in dry form. This product is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. It has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 3001 is a high-charge, very high-molecular-weight anionic polyacrylamide in dry form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications. This product has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

PWT 3905-S is a low charge, very high molecular weight anionic polyacrylamide in dry form. It is used as a flocculant in a wide variety of municipal and industrial wastewater treatment applications, and has been successfully applied in liquid/solids separation systems, including clarification and dewatering.

Aquacros® HC-2075 is a high-performance liquid blended phosphate product designed to sequester iron and manganese, as well as hardness salts, while also providing corrosion control. It reduces the build-up of scale in the distribution system, helps to avoid the need for replacing existing piping and associated equipment caused by excessive deposition or under-deposit corrosion, and assists municipalities in meeting the Lead and Copper Rule. It is a clear liquid.