Automotive & Transportation
3,520 products found for Automotive & Transportation in Paints & Coatings
DYTEK® A amine (2-methylpentamine-1,5-diamine) is a methyl branched diamine with differential reactivity of each amine group that allows for crystallinity disruption in various applications such as high temperature nylon and polyamides, polyurethane chain extenders, and epoxy hardeners. It is also used in applications such as water treatment, corrosion inhibition, and metalworking fluids where amine functionality and pH control are important. DYTEK®A has 93% recycle content. It is also used in applications such as water treatment, corrosion inhibition,and metalworking fluids where amine functionality and pH control are important.DYTEK®A has 93% recycle content.
ADDITOL® XL 255 N
Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.
Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.
ADDITOL® VXL 4950
ADDITOL® VXL 4950 is an adhesion-promoting primer for plastics. It must be applied as pre-treatment primer and cannot be used as additive in paints.
Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.
Kraton™ FG1901 G
Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.
MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.
CYCAT® 4045 Catalyst
CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.
SETALUX® 1385 BX-51
SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.
CYMEL® 303 LF Resin
CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.
Ultrafine, highly pulverized, premium brightness kaolin for extending high gloss solvent and water-based coatings.
CYMEL® 385 Resin
CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.
Kraton™ D4150 K
Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.
Nadone® HDR® Cyclohexanone
Nadone® HDR® Cyclohexanone is ideal in high purity applications. Key benefits include uniform evaporation, minimal moisture content and a low toxicity, ecotoxicity and volatile organic compound (VOC) profile. AdvanSix Nadone® HDR® Cyclohexanone is sold to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications. High Purity Nadone® HDR® Cyclohexanone is used in the Adhesives & Sealants market as an intermediate in the production of construction adhesives; DIY and Consumer sport and fashion applications; textile and footware adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural, commercial and residential pest control, and industrial weed and vegetation control. High Purity Nadone® HDR® Cyclohexanone is used in the Automotive and Transportation market as an intermediate in the production of coatings and finishes. High Purity Nadone® HDR® Cyclohexanone is used in the Building and Construction market as an intermediate in pipes and plumbing applications, and construction chemical adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Consumer Goods market as an intermediate in the production of appliances and electronics. High Purity Nadone® HDR® Cyclohexanone is used in the Electrical and Electronics market in the production of devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives, printed circuit boards, semiconducting manufacturing applications. High Purity Nadone® HDR® Cyclohexanone is used in the Food and Nutrition market in processing and packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Healthcare and Pharma market in tubing and fluid handling and medical flexible packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Paints and Coatings market in aerospace coatings, industrial and metal coatings and can coating applications. High Purity Nadone® HDR® Cyclohexanone is used in the Printing & Packaging market as a packaging can coatings, rigid packaging caps, closures, containers and tubs.
RESAMIN® HF 480
Resamin® HF 480 is a slightly yellow, high viscous liquid with characteristic odor. This carbamic resin, based on butylurethane and formaldehyde, has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin® HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability.
Kraton™ D1193 P
Kraton D1193 P is a clear, linear triblock copolymer based on styrene and isoprene, with a polystyrene content of 24%. It is supplied from North America in the physical form identified below. Kraton D1193 PT - supplied as a dusted dense pellet Kraton D1193 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.
Kraton™ MD1653 M
Kraton MD1653 M is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. Kraton MD1653 MO supplied as an organic dusted dense pellet Kraton MD1653 M is used as a modifier of polymers. It is also suitable as an ingredient in formulating adhesives, sealants and coatings. Note: This Kraton polymer product is a development product. Thus, its properties and chemical composition may change based on market feedback. Kraton Polymers reserves the right to change specifications and/or discontinue production of the product.
EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations.
CYMEL® 325 Resin
CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.
EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings.
SETALUX® 1184 SS-51
SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.
EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, and exterior durable coatings.
ADDITOL® VXW 6208
ADDITOL® VXW 6208 is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in waterborne alkyd resin, acrylic, epoxy, and urethane emulsions.
SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting hardener for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700 produce outstandingly smooth, dead matte finishes.
CYCAT 6925 catalyst is amine-neutralized dodecylbenzene sulfonic acid. It is compliant with FDA 21 CFR Section 175.300 concerning chemicals for use in resinous and polymeric coatings.
DAOTAN® TW 6450/30WA
DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates
SETALUX® 1152 SS-60
SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.
CYMEL® 1170 Resin
CYMEL® 1170 resin is a highly butylated glycoluril crosslinker designed for use in both water and organo-soluble coating systems. Its superior adhesion relative to existing melamine and benzoguanamine crosslinkers provides increased corrosion resistance and flexibility. The better adhesion is not lost after post-forming of parts and exposure of the stressed coating to humidity, steam, dry heat, or weather. This feature makes this product a good candidate for coil of metal decoration enamels and primers. In addition, it releases significantly lower amounts of formaldehyde during the baking process compared to other amino resins.
SETAQUA® 37-6517 (formerly SETAQUA® 6517) is an acrylic polyol emulsion suitable for high durable, abrasion- and chemical resistant two-component waterborne PUR paint systems.
SETAQUA® B E 270
SETAQUA® B E 270 is water thinkable, oil-free, polyester resin. In combination with water-thinkable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with low co-solvent content.
AdvanSix Technical Acetone
AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.
Sasol Ethyl Acetate
Sasol is a supplier of Ethyl Acetate of 99.80% mass purity. Used as a solvent in surface coatings, inks, adhesives, and personal care products and as a process / extraction medium. Good solvent for a variety of resins, including epoxies, urethanes, cellulosics, acrylics, and vinyls. Used in coatings for wood furniture, wood fixtures, wood maintenance, containers, closures, auto refinishing, and marine applications. General solvent which finds application in the formulation of perfumes and nail polish removers. For documents specific to a region, please contact Sasol using the 'Request Document' button.
GP® CK-2400 coating resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, leveling, gloss and intercoat adhesion.
SETALUX® D A 450 BA/X
SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.
DPGDA (Dipropylene Glycol Diacrylate) is a difunctional reactive diluent that polymerizes when exposed to sources of free radicals. DPGDA is particularly useful in coatings and inks where improved flexibility and adhesion are desired in combination with good moisture resistance.
ADDITOL® LED 01
ADDITOL® LED 01 is a mercapto modified polyester acrylate resin. It is added as co-resin to UV curable formulations, in order to transform them into UV LED curable systems. It is used as co-resin, in order to increase the surface cure of a formulation when cured with an UV LED lamp.