products in Concrete Coatings & Stains

Wacker Chemie AG

SILRES® IC 701

SILRES® IC 701 is an anti-graffiti coating intended for use in the professional market for the protection of concrete, masonry, and metal substrates. The cured coating provides excellent release and ease of removal for permanent markers and aerosol paints. SILRES® IC 701 is based on polysiloxane polymers and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. It cures via the condensation reaction at room temperature by reacting with ambient moisture.

Wacker Chemie AG

SILRES® BS 16

SILRES® BS 16 is an aqueous solution of potassium methyl siliconate used in diluted form for the hydrophobic impregnation of mineral construction materials, making them water-repellent. The water-repellent properties of SILRES® BS 16 are developed through its reaction with atmospheric carbon dioxide (CO2), forming polymethylsilicic acid. However, it should be noted that, like all siliconates, SILRES® BS 16 may cause a white deposit on the surface of colored construction materials if used outside the recommended application guidelines.

Wacker Chemie AG

SILRES® BS 17040 A

SILRES® BS 17040 A is a water-thinnable, solventless silane emulsion that serves as a high-quality water repellent for impregnating and priming alkaline mineral surfaces. Similar to SILRES® BS 17040, it can be used as a water-resisting admixture for non-load-bearing manufactured concrete products.

Wacker Chemie AG

SILRES® BS 3003

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

Wacker Chemie AG

SILRES® BS 1001

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

Wacker Chemie AG

SILRES® BS SMK 2101

SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.

Wacker Chemie AG

SILRES® BS 1803 A

SILRES® BS 1803 A is a stable and VOC-compliant silicone emulsion with a 60% active content. It is specifically designed to reduce water uptake and create visual beading on concrete substrates while allowing the pores and capillaries to remain unblocked. This product is particularly effective when it comes to preventing water uptake and promoting beads, even at very low addition levels. One of the main applications of SILRES® BS 1803 A is as an admixture for non-load bearing cement-based formulated products, including precast products, blocks, and pavers. By incorporating this emulsion into the formulation, the resulting products gain enhanced waterproofing properties and resistance to water penetration. Furthermore, SILRES® BS 1803 A can also be used as a topical sealer for post-treatment of cement-based formulated products.

Wacker Chemie AG

SILRES® BS 6921

SILRES® BS 6921 is a silane-terminated binder based on α-silane technology for the impregnation of mineral substrates or as a thin-layer coating for mineral substrates. It can be used in combination with SILRES® BS 6920 when a softer formulation is required.

Wacker Chemie AG

SILRES® BS 1340

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

Wacker Chemie AG

SILRES® BS 1360

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

Wacker Chemie AG

SILRES® BS Creme C

SILRES® BS Creme C is an aqueous, solventless, creamy, silane-based water repellent. It is a high-quality specialty product designed for the hydrophobic impregnation of both normal and reinforced concrete. It is commonly used in applications related to concrete protection, construction materials, hydrophobic impregnation, and infrastructure.

Scott Bader

Crystic® Spray Gelcoat LS 30PA

Crystic® Spray Gelcoat LS 30PA is a superior weathering Iso-NPG gelcoat. It is pre-accelerated and formulated for spray application. Crystic® Gelcoat LS 30PA has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity.

Scott Bader

Crystic® Fireguard Gelcoat 72PA

Crystic® Fireguard Gelcoat 72PA is a new technology spray fire retardant gelcoat which is halogen free. It has a number of fire approvals with different Crystic resin systems. This product has low surface spread of flame compared to competitive standard technology fire retardant gelcoats.

Scott Bader

Crystic® Brush Topcoat 506PA

Crystic® Brush Topcoat 506PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by roller or brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Scott Bader

Crystic® Fireguard Gelcoat 72PAX

Crystic® Fireguard Gelcoat 72PAX is a new technology, spray fire retardant topcoat which is halogen free. It has low surface spread of flame compared to competitive standard technology fire retardant topcoats. This pre-accelerated filled spray topcoat can be used both internally and externally for building, transport and general industrial work.

Scott Bader

Crystic® Spray Gelcoat 976SMK

Crystic® Spray Gelcoat 976SMK is a chemical resistant, thixotropic and pre-accelerated Iso - NPG gelcoat, designed for the manufacture of swimming pools. It will provide high chemical and hydrolysis resistance. This gelcoat is to be applied by spray with airless machine.

Scott Bader

Crystic® Brush Topcoat 507PA

Crystic® Brush Topcoat 507PA is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin and has been formulated for application by brush. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Scott Bader

Crystic® Isophthalic Spray Gelcoat GT-1000

Crystic® Isophthalic Spray Gelcoat GT-1000 is a gelcoat range providing a fast, precise service producing high quality gelcoats for you. Recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Scott Bader

Crestacryl® 71-1030

Crestacryl® 71-1030 is an acrylic resin with excellent adhesion, vapour permeability and permanent flexibility together with very good alkali and water resistance. This thermoplastic acrylic resin can be used for high grade façade, wall, asbestos, cement, concrete paints and sealers.

Scott Bader

Crystic® Isophthalic Spray Gelcoat GT-900

Crystic® Isophthalic Spray Gelcoat GT-900 is a high performance isophthalic gelcoat, filled, pre-accelerated and formulated for spray application. It has been developed to have excellent intrinsic water and weather resistance. The viscosity profile ensures even coverage with minimal drainage and low film porosity. This product is recommended for use in the marine, building and transport industries. It is also suitable for general molding requirements.

Scott Bader

Crystic® Isophthalic Brush Gelcoat LS 88PA

Crystic® Isophthalic Brush Gelcoat LS 88PA is an isophthalic gelcoat. It is pre-accelerated and formulated for brush application and is recommended for use in all markets including marine, land transport and building applications. It is also suitable for general molding requirements.

Scott Bader

Crystic® Ecogel S4PA

Low Styrene Crystic® Ecogel S4PA is a lower cost option, suitable for industrial applications (not Marine) where users are looking for an industrial option with low styrene content (23% styrene content). It is a high performance isophthalic gelcoat. This gelcoat is pre-accelerated and formulated for spray application.

Scott Bader

Crystic® Low Viscosity Gelcoat 64PA

Crystic® Low Viscosity Gelcoat 64PA is a high performance isophthalic gelcoat, pre-accelerated and formulated for brush or roller application. It is recommended for use in all markets including marine, land transport and building applications and is also suitable for general molding requirements. Crystic® Gelcoat 64PA is approved by Lloyd'™s Register of Shipping.

Scott Bader

Crystic® Ecogel S0PA

Zero Styrene Crystic® Ecogel S0PA is a zero styrene spray gelcoat for industrial applications such as the wind energy sector. This product is acetone free and can be used with Butanox® M-50. Key features include: High elongation Zero Styrene Content Excellent weathering performance Easy to apply Low VOC emission

Scott Bader

Crystic® Isophthalic Brush Gelcoat 65PA

Crystic® Isophthalic Brush Gelcoat 65PA is a general purpose Isophthalic brush gelcoat used successfully globally across all market sectors for years. Molders choose this gelcoat over competitive products because of its exceptional handling properties in production, good flexibility, good gloss and ease of repair.

Dar-Tech Inc.

Syntran® 6301

Syntran® 6301 is a water-based, cationic acrylic copolymer solution that is recommended for low-VOC stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. Syntran® 6301 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

Dar-Tech Inc.

Syntran® 6303

Syntran® 6303 is a water-based, cationic acrylic copolymer solution that is recommended for stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. It is especially recommended for wood primers where sandability is required. Syntran® 6303 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

Dar-Tech Inc.

Syntran® 6302

Syntran® 6302 is a water-based, cationic acrylic copolymer solution that is recommended for stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. It is especially recommended for wood primers where sandability is required. Syntran® 6302 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

Dar-Tech Inc.

Syntran® DR 7015

Syntran® DR 7015 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Dar-Tech Inc.

Syntran® DR 7055

Syntran® DR 7055 is an alkali-soluble acrylic polymer that is based on Interpolymer Corporation's polymeric surfactant technology. This technology was designed to improve wetting and incorporation of pigments or additives into water-based inks, pigment concentrates, and coatings. This product is used for wood coatings, concrete coatings, architectural coatings, etc.

Dar-Tech Inc.

DeCAL 4040

DeCAL 4040 is a self-crosslinking resin for direct-to-metal coatings, a universal thermoplastic Styrene/Acrylic copolymer in emulsion form offering enhanced flexibility, high water resistance, and excellent pigment binding power, adhesion, and gloss. DeCAL 4040 offers good block resistance, good compatibility with associative thickeners, and fast drying.

Dar-Tech Inc.

Syntran® 6211

Syntran® 6211 is based on high-solids technology. This technology creates a film with very high flexibility, excellent water resistance, and excellent coverage. This technology also allows for excellent adhesion over multiple substrate types. This white emulsion is used in interior and exterior paints and concrete primers.

Dar-Tech Inc.

Syntran® 6130

Syntran® 6130 is based on Interpolymer Corporation's hybrid acrylic technology. This technology combines two different ionic structures in the same polymer network, increasing the adhesion to multiple substrates while providing a firm film. This milky dispersion is used in concrete and wood coatings.

Dar-Tech Inc.

Syntran® 1921

Syntran® 1921 is based on Interpolymer's proprietary technology. This technology improves adhesion to a variety of substrates while producing a strong film with exceptional overall properties. This technology gives formulators the option to post-add crosslinkers that will react with either the free acid groups or hydroxyl groups on the backbone of the polymer.

Dar-Tech Inc.

Syntran® AC 9073

Syntran® AC 9073 is based on Interpolymer Corporation's proprietary self-crosslinking technology. This technology combines two distinct crosslinking mechanisms on the same polymer backbone, significantly increasing chemical, stain, and water resistance. This technology was designed for the self-crosslinking mechanism to fully cure at room temperature while maintaining long-term shelf stability.

Dar-Tech Inc.

PerformaSil™ 200 Anti-Graffiti Coating

PerformaSil™ 200 Anti-Graffiti Coating is a single-component, water-based silicone elastomer that dries to form a tough, durable film that provides long-lasting, permanent graffiti and water protection. It cures to form a breathable membrane that is impervious to water and protects surfaces from spray paint, marker, and felt tip pens. Graffiti is easily removed with a power washer, scrub brush, or commercial graffiti cleaners. This coating can eliminate repainting costs and prevent properties from losing value.