Products in Other Building & Construction Applications

VISIOMER® 1,3-BDDMA (1,3-butanediol dimethacrylate) is a dimethacrylate monomer with low viscosity. It is well-suited for use as a crosslinking agent, providing cohesive strength to polymers. This versatile compound finds applications in various industries, including adhesives and sealants, composites, construction, as well as plastics and rubber.

VISIOMER® 1,4-BDDMA is a low viscosity dimethacrylate monomer widely used as a crosslinker. It serves as an excellent replacement for styrene in composite resin, functioning as an adhesion promoter and a hardener for PVC plastisols. Additionally, it acts as a coagent for peroxide crosslinking of elastomers. This versatile compound finds applications in industries such as adhesives and sealants, composites, construction, and plastics and rubber.

VISIOMER® EGDMA (ethylene glycol dimethacrylate) is a hydrophilic dimethacrylate monomer renowned for its low viscosity. It is an excellent choice as a crosslinking agent, effectively enhancing the resistance properties of polymers and elastomers. This versatile compound finds applications in various industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

VISIOMER® Terra C13-MA (methacrylic ester 13.0) is a specialty monomer that offers enhanced water repellency and improved resistance against polar solvents. It is commonly employed to increase the hydrophobicity of resins, making them more resistant to water and other polar substances. This particular monomer is derived from raw materials obtained from natural oils, highlighting its environmentally friendly nature. VISIOMER® Terra C13-MA finds applications in various industries including adhesives and sealants, coatings, construction, oil and gas, paper, personal care, and healthcare.

VISIOMER® 1,6-HDDMA (1,6-hexanediol dimethacrylate) is a hydrophobic dimethacrylate monomer highly suitable as a crosslinker for reactive systems. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, as well as plastics and rubber.

VISIOMER® PEG 200 DMA (polyethylene glycol 200 dimethacrylate) is an aliphatic dimethacrylate monomer with low viscosity, making it an excellent choice as a co-monomer to enhance the mechanical properties and chemical resistance of resins. This label-free monomer finds applications in a variety of industries, including 3D printing, adhesives and sealants, coatings, composites, construction and, personal care.

VISIOMER® BDGMA (butyl diglycol methacrylate) is a monofunctional and label-free methacrylate monomer that contains ether functionality. It possesses a very low glass transition temperature (Tg), making it an excellent plasticizing monomer. This compound is utilized in the formulation of polymers, copolymers, and light-curing systems. Industries such as adhesives and sealants, coatings, and construction benefit from the versatile properties of VISIOMER® BDGMA.

VISIOMER® MPEG 750 MA W is a highly polar monomer with excellent water solubility. It is composed of methoxy polyethylene glycol 750 methacrylate, with a concentration of 50% in water. This monomer is commonly used as a co-polymerizable emulsifier to stabilize latex polymer systems, particularly emulsions. Industries such as coatings, oil and gas, personal care, and pharma and healthcare can benefit from its properties.

VISIOMER® MPEG 500 MA is a pure and water-free methoxy polyethylene glycol methacrylate monomer, available in liquid form for easy handling. It is soluble in water and consists of approximately 12 ethylene oxide (EO) units in its chain. Industries such as coatings, healthcare, and personal care can utilize this monomer for various applications.

VISIOMER® TMPTMA (trimethylol propane trimethacrylate) is a trifunctional methacrylate monomer renowned for its ability to serve as a crosslinking agent. It imparts cohesive strength and high temperature resistance to polymers and elastomers by forming dense networks. This versatile monomer finds applications in industries such as 3D printing, adhesives and sealants, coatings, construction, as well as plastics and rubber.

VISIOMER® MADAME is a monofunctional methacrylate with a tertiary amino group in the side chain. It is an ideal ingredient for improving the adhesion of formulations. This monomer is widely used in the preparation of cationic polymers, particularly quaternary ammonium polymers and flocculants. Industries such as coatings, oil and gas, paper, and personal care can benefit from the unique properties of VISIOMER® MADAME.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

VISIOMER® MPEG 2005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 2000 methacrylate, with a concentration of 50% in water. This monomer finds applications in industries such as construction, oil and gas, and personal care.

VISIOMER® MPEG 1005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 1000 methacrylate, with a concentration of 50% in water. This monomer finds applications in industries such as construction, oil and gas, and personal care.

VISIOMER® Terra IBOMA is a bulky side-chain alkyl methacrylate monomer known for its exceptionally high glass transition temperature (Tg). It offers the advantage of lowering viscosity in polymers, enabling the formulation of high solids content. This monomer finds applications in various industries, including adhesives and sealants, coatings, and composites.

VISIOMER® Terra C17,4-MA (methacrylic ester 17.4) is a methacrylate monomer with a long alkyl chain, resulting in a low glass transition temperature (Tg). This monomer is commonly used to enhance the hydrophobicity of resins, making them more resistant to water and other polar substances. In addition to its role as a hydrophobicity enhancer, VISIOMER® Terra C17,4-MA is also employed as a flexibilizer and internal plasticizer in coatings and reactive resins applications. By incorporating this monomer into formulations, manufacturers can achieve improved flexibility and enhanced performance of their coatings and reactive resins.

VISIOMER® c-HMA (Cyclohexyl methacrylate) is a cycloaliphatic monomer characterized by its low viscosity. It serves as a fundamental component in the formulation of polymers that exhibit excellent weathering resistance and chemical resistance. This monomer is widely utilized in industries such as adhesives, sealants, coatings, and composites to enhance the performance and durability of the resulting products. By incorporating VISIOMER® c-HMA, manufacturers can develop polymers with superior resistance to environmental factors and various chemicals, ensuring long-lasting and reliable applications in diverse settings.

VISIOMER® MPEG 5005 MA W is a highly polar monomer with excellent water solubility. It consists of methoxy polyethylene glycol 5000 methacrylate, with a concentration of 50% in water. This monomer finds applications in various industries including coatings, adhesives, composites, construction, plastics, textiles, leather, oil & gas, paper, water, personal care, health care, and synthesis.

VISIOMER® DMAPMA (3-Dimethylamino propyl methacrylamide) is an amino functional methacrylamide monomer. Its methacrylamide structure provides increased hydrolytic stability compared to methacrylic esters. This monomer is commonly used to enhance pigment wetting and improve substrate adhesion to polymers. Industries such as coatings, oil and gas, paper, personal care, and healthcare can benefit from the unique properties of VISIOMER® DMAPMA.

VISIOMER® IDMA (Isodecyl methacrylate) is a hydrophobic monomer known for its low shrinkage and low glass transition temperature (Tg). It exhibits excellent dilution power, resulting in low viscosity when used in polymer formulations. The low Tg of IDMA imparts extreme softness to the resulting polymers. This versatile monomer finds applications in various industries including adhesives and sealants, coatings, oil and gas, personal care, healthcare, and textile and leather.

VISIOMER® BNMA (benzyl methacrylate) is an aromatic monofunctional methacrylate known for its low viscosity. It serves as a reactive diluent, offering excellent solvency in adhesive, ink, and coating formulations. This versatile compound finds applications in various industries, including adhesives and sealants, coatings, composites, and electronics.

VISIOMER® EHMA (2-Ethylhexyl methacrylate) is a hydrophobic monomer with a low glass transition temperature (Tg), minimal shrinkage, and low viscosity. This monomer offers flexibility and exhibits excellent dilution and solvency power. It is widely used in the production of various polymers for diverse applications across industries such as adhesives and sealants, coatings, oil and gas, personal care, and healthcare. Its unique properties make it a valuable component in the formulation of materials that require flexibility, low shrinkage, and efficient solvency capabilities.

VISIOMER® PEG 8000 DMA W (polyethylene glycol 8000 dimethacrylate) is a long-chain hydrophilic crosslinking monomer. It is commonly utilized as a co-monomer in formulations for joint sealants, specifically to seal construction gaps in concrete slabs, decks, and similar structures. This particular compound finds applications in the adhesives and sealants, coatings, and construction industries.

AdvanSix High Purity Acetone not only has minimum impurities, but also contains low benzene, and low water. It is produced to the highest standard for key industry segments.Grades of AdvanSix Acetone are commercially available, meeting high purity NF and ACS certification requirements to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications.High Purity Acetone is used in Building and Construction applications as an intermediate in the production of construction adhesives; DIY and Consumer applications as repair adhesives; As a building envelope material intermediate in the production of architectural coatings, Exterior insulation and finishing systems, and glazing and window elements; Decorative paints and coatings, pipes and plumbing cement systems; Construction chemical uses in adhesives; Acetone is used as an intermediate in the flooring and surface segment as floor coatings; Infrastructure coatings and markings; Roofing sealants and caulks. High Purity Acetone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural pest control, and industrial weed and vegetation control. High Purity Acetone is used in the Automotive and Transportation market as an intermediate in the production of aftermarket parts, exterior and body parts, interior parts and lighting; as a coating for aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings.High Purity Acetone is used in Electrical & Electronic markets as an intermediate in the production of devices and assemblies for automotive and consumer electronics, Packaging and assembly adhesives and sealants; Printed Circuit Boards and other semiconductor manufacturing applications. High Purity Acetone is used in the Healthcare & Pharma markets as an oral and dental drug delivery solution and as an intermediate in tubing and fluid handling. NF Acetone is extensively used in API pharmaceutical manufacturing, as an excipient and coating, and processing aid. High Purity Acetone is used in Home and Personal Care markets in nail care applications.High Purity Acetone is used in the Paints & Coatings market in the automotive and transportation segment as an intermediate in aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings; High purity Acetone is used in architectural, decorative, flooring, infrastructure, roads, and paving, wood coatings and finishes applications. Industrial coating applications include agricultural and construction, appliances and consumer goods, coil coatings, container coatings, furniture coatings, and metal coatings. Packaging coating applications include film and foil, overprint varnishes, primers and lacquers and other aerosol coating applications.

AdvanSix High Purity Acetone NF Grade meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of: Building and Construction Construction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks. Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products. Automotive & Transportation Automotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications. Electrical & Electronics Devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications. Healthcare & Pharma Oral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications. Paints & Coatings Architectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.

With low impurities, low benzene, and low water content, AdvanSix High Purity Acetone ACS grade is produced to the highest purity product requirements for the Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare industries. It meets or exceeds purity standards set by the American Chemical Society (ACS) for food, drug, or medicinal use and can be used for ACS applications or for general procedures that require stringent quality specifications and a purity of ≥95%, including:   Building & Construction Construction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.   Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products.   Automotive & Transportation Aftermarket parts, exterior and body parts, interior parts and lighting.   Adhesives & Sealants Packaging and assembly adhesives and sealants,   Paints & Coatings Aerospace, automotive OEM, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.   Electrical & Electronics Devices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.   Packaging Film and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.   Personal Care Nail care applications.   Pharmaceuticals & Healthcare Oral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Finnfix® 150 G CMC is a purified medium viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is specifically designed to meet the viscosity requirements for various industrial applications. Finnfix® 150 G CMC enhances water retention and provides stability in formulations, making it suitable for industries that demand precise control over rheological properties. This product supports sustainable practices by utilizing responsibly sourced materials while ensuring high performance and reliability in manufacturing processes.

Finnfix® 2000 CMC is a purified high viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is designed to offer superior viscosity suitable for demanding industrial applications. Finnfix® 2000 CMC provides excellent thickening and stabilizing properties, enhancing the performance and durability of formulated products. This product supports sustainable practices by utilizing responsibly sourced materials, ensuring consistent quality and reliability in manufacturing processes where high viscosity and effective rheological control are essential.