products in Building & Construction

Munzing

CERETAN® MXF 2999

CERETAN® MXF 2999 is a Spherical, micronized functional blend, coated with PTFE. This Product provides controlled textures, excellent scratch and abrasion resistance as well as lubricating properties, improved heat resistance and solvent resistance.

Munzing

AGITAN® A203E

only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.

Momentive Performance Materials

CoatOSil™ 2287 Silane

Enhancing the physical properties of water-borne dispersion polymers, such as polyurethane and acrylic latexes, CoatOSil™ 2287 silane enables the formulation of coatings with good shelf stability, improved wet adhesion and enhanced resistance to water and organic solvents. This non-yellowing additive can be considered as an adhesion promoter or crosslinker.

Huber Engineered Materials

Martinal® ON-313 S

Martinal® ON-313 S is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.

IGM Resins

Omnistab OB

Omnistab OB is a fluorescent whitening agent for plastic, paint, ink and photographic paper. It is efficient and stable at high temperatures.

Polyols and Polymers

POLYTONE® K94

POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability

Munzing

AGITAN® 350

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

IGM Resins

Omnirad 500

Omnirad 500 is a highly effective liquid photoinitiator, used for UV-polymerisation of suitable resins. The low viscosity allows lower of the viscosity of the total formulation. Well suited for water-based formulation.

Huber Engineered Materials

Pergopak® M6

Pergopak® M6 is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention.

Munzing

LUBA-print® 725

LUBA-print® 725 is a wax dispersion / wachsdispersion product.Rheology-modifying wax emulsion to improve the effect pigment orientation in aqueous coatings. Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

MPD Industries

MPD Industries UVP 0612 99

MPD Industries UVP 0612 99 is a difunctional epoxidesed soyabean oil acrylate oligomer that offers very good pigment wetting characteristics and produces flexible well adhering free radically cured films. It has low skin irritancy and suitable for flow and leveling of UV/EB curable ink and coating.

IGM Resins

Omnirad 2100

Omnirad 2100 is a highly efficient liquid curing agent to initiate radical polymerization of unsaturated resins after exposure to UV light such as those based on a prepolymer – e.g., acrylates and unsaturated polyesters – in combination with mono- or multifunctional monomers as reactive thinners. It is well suitable for formulations in which Omnirad TPO is used. Omnirad 2100 provides all the handling advantages of a liquid product. In thicker coatings Omnirad 2100 offers improved bottom curing compared with that of Omnirad TPO. It is especially suitable for white-pigmented formulations with minimal yellowing after curing and for coatings with low pigment volume concentration. Therefore Omnirad 2100 can be offered in almost all applications as a one-to-one replacement for Omnirad TPO with certain advantages.

ADDAPT Chemicals BV

BioWet™ 150R

ADDAPT BioWet 150R is a solvent free, ready biodegradable wetting agent which improves the Wet-Edge (open time) and Water Retention. It is a Polyhydroxy - Amide. The product is EINECS registered.

Jubail Chemical Industries

Araldite® GT 7071

Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.

Patcham FZC

Pat-Add AF 34

PAT-ADD AF 34 is liquid defoamer for use in waterborne coatings like varnishes, wood-coatings, industrial paints, aqueous inks and pigment dispersions.PAT-ADD AF 34 is oil and VOC-free and based on a polysiloxane hydrophobic polymer compound.PAT-ADD AF 34 is versatile in application, so efficient in various waterborne systems such as dispersion paints, industrial systems, inks and adhesives. It is effective fordefoaming and anti-foaming purposes during manufacturing and application and reduces risk of micro-foaming.

Kraton

Kraton™ D1119 P

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® R 630

NEVOSIL® R 630 is employed as a main binder in silicone based masonry paints. If formulated properly, the products made with NEVOSIL® R 630 are characterized by superior qualities such as high permeability to water vapor and CO2, low water absorption, low soiling tendency, a mineral like appearance and longer life.

Munzing

AGITAN® 120

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

Argon Kimya

ARAKRIL STA 565 SL

Emulsion for sealants, roof coatings, moisture barrier coatings, crack fillers, caulks high with tensile strength and superior flexibility

Huber Engineered Materials

Pergopak® M4

Pergopak® M4 is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention.

OCI MELAMINE

Melafine®

Melafine® is halogen-free and has a tightly controlled, narrow particle size distribution to ensure a reliable and predictable intumescent process. This makes Melafine the ideal blowing agent for leading coatings producers. Its fine particle size is also fit for use in thin film coatings for architecturally exposed surfaces.

Munzing

AGITAN® 218

AGITAN 218 is a defoamer for all common emulsion systems.

Lawter

Filtrez™ 531A

Filtrez™ 531 A is an alcohol soluble fumaric acid modified rosin ester with a high softening point and moderately high acid value. Filtrez™ 531 A can be used in solvent and water-based flexographic and in gravure inks. This resin can also be used as a leveling and gloss-promoting agent in floor polishes.

Reichhold

UROTUF® F77-M-60

UROTUF® F77-M-60 is a one-package, ASTM Type I oil-modified urethane based on linseed oil, which cures by oxidation at ambient temperatures in the presence of metallic driers.

AFCONA Additives

Afcona 3236

Additive designed as slip and leveling agent with good defoaming effect.

IGM Resins

Photomer 5930

PHOTOMER® 5930 is a tetra functional amine modified polyether acrylate used in UV/EB applications.

Neville

NEVPENE® 9545

NEVPENE® 9545 is a low molecular weight, C5 modified C9 liquid hydrocarbon resin produced by catalytic polymerization of aromatic and aliphatic monomers derived from petroleum feedstocks.

IGM Resins

Omnipol BL 728

Omnipol BL 728 is polymeric photoinitiator blend which contains a high concentration of Omnipol TX in a polymeric carrier. Due to the choice of the components this blend can be easily handled and stored at room temperature.

Munzing

WÜKONIL® FC 960

WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as façade paints and plasters.WÜKONIL® FC 960 is a wax additive specially developed for waterborne systems such as facade paints and plasters. Properties and advantages are very good hydrophobic agent Reduction of water absorbency and cracks Improvement of anti blocking Good surface slip Improvement of recoatability and shade stability Reduced adhesion of plasters on working equipment (\"spatula\"). Our high quality wax emulsions and dispersions are a necessity for all customers who prefer working with ready-made emulsions or dispersions in contrast to a dry wax. The ease of incorporation is the key benefit of liquid products.

Ultrakim Kimya San. ve Tic. A.Az.

NEVOSIL® SI 145

NEVOSIL® SI 145 is a solvent-free, water-diluted emulsion of functional polysiloxanes.

IGM Resins

Omnipol BP

Omnipol BP is a difunctional benzophenone photoinitiator specifically designed for use in inks and coatings requiring low migration and low volatility. It is particularly suited to use in combination with amine synergists and non-pigmented coatings as an alternative to benzophenone.

Kraton

Kraton™ A1536 H

Kraton A1536 H is a linear triblock copolymer based on styrene and ethylene/butylene. It is supplied from North America in the physical form identified below. Kraton A1536 HU - supplied to customers as an undusted powder. Kraton A1536 HS - supplied to customers as a dusted powder Kraton A1536 H is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Sapici Spa

REXIN HSP 50

Saturated polyester resin with high wettability and flexibility. Suitable for high filled two-pack coatings and adhesives formulations.

Kraton

Kraton™ D4271 J

Kraton D4271 J is an oil-extended branched block copolymer based on styrene and butadiene, with bound styrene of 45% mass. It is supplied from Japan in the physical forms below. Kraton D4271 JSP - supplied as dusted dense pellets Kraton D4271 JS - supplied as dusted crumb Kraton D4271 J is used for formulating compounds for footwear and general purpose applications and as a modifier of bitumen.

Kraton

Kraton™ D1102 E

Kraton D1102 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1102 ET - supplied as a dusted porous pellet Kraton D1102 EU - supplied as an undusted porous pellet Kraton D1102 E is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton

Kraton™ D1118 E

Kraton D1118 E is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from Europe in the physical form identified below. Kraton D1118 ET - supplied as porous pellets dusted with talc Kraton D1118 ES - supplied as porous pellets dusted with amorphous silica Kraton D1118 ESM - supplied as powder dusted with amorphous silica Kraton D1118 ETM - supplied as powder dusted with talc for the North American market Kraton D1118 E is used for modification of bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.