products in Paints & Coatings: Binder & Resin

allnex

SETAQUA® 6754

SETAQUA® 6754 is a multipurpose aqueous coating that is designed to be used in a variety of applications, such as industrial coatings, wood coatings, ornamental paints, building and construction, and specialized coatings. Designed to work well on a variety of surfaces, this dispersion is compatible with metal, wood, and plastics. SETAQUA® 6754 guarantees a superior finish with qualities including superior hot tire pickup resistance, high hardness, good adhesion, blockage resistance, increased chemical resistance, and abrasion resistance.

allnex

SETAQUA® 6004 YA

SETAQUA® 6004 YA is a unique product in the paints and coatings market that is suitable for both metal and wood surfaces. This solution offers a high gloss finish and a well-balanced set of properties, and finds applications in automotive and transportation coatings, marine coatings, vehicle refinishing, building and construction decorative paints, wood coatings and finishes, industrial coatings, metal coatings, and industrial transportation.

Reichhold

SYNTHEMUL® PX-702

SYNTHEMUL® PX-702 is a acrylic hard thermoplastic resin in MMA

Reichhold

BECKOSOL® 12-901

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

Argon Kimya

ARAKRIL STA 357

Binder for tile adhesives, two component mortars, insulating coatings with cement and flat roof and moisture barrier coatings

Scott Bader

Texicryl® 13-602

Texicryl® 13-602 is a styrene acrylic copolymer emulsion designed for use in flexible fillers, caulks, sealant applications and architectural coatings. It enhances the workability and technical performance of many products. It meets all environmental demands, such as low VOC, APEO-free and formaldehyde-free with no compromise on quality and performance.

Georgia-Pacific Chemicals

GP 4003

GP® 4003 is a second-generation waterborne phenolic resin developed by Georgia-Pacific Chemicals. It is an opaque, white liquid dispersion that incorporates a non-ionic protective colloid. GP 4003 is a heat reactive resin that is intended to replace solvent-based phenolic resins where low Volatile Organic Compound (VOC) emissions are desired. Compound (VOC) emissions are desired.

Georgia-Pacific Chemicals

GP BKR-2620

GP® BKR-2620 coating resin is a solid, heat-reactive, modified phenolic resin. It can be used with a wide selection of solvents and is compatible with plasticizers and polyvinyl butyral resins. Films made with unplasticized GP BKR-2620 resin have greater flexibility than those made with other unmodified phenolic resin baking solutions.

Georgia-Pacific Chemicals

GP CK-2103

GP® CK-2103 resin is a novolac resin modifier for alkyd and epoxy air dry coatings designed to improve water resistance, hardness, gloss and adhesion. Coatings made with GP CK-2103 resin dry faster than those made with GP CK-2432 resin and will darken on drying.

allnex

UCECOAT® 7674

UCECOAT® 7674 is an emulsion-type coating designed for the building and construction and paints and coatings markets. With labeling claims of being solvent-free, tin-free, and VOC-free, it is primarily used for wood coatings and finishes, decorative paints, and industrial coatings on wood surfaces. This primer offers flexibility in application methods such as curtain coating, roller, and spray. Utilizing radiation cure and waterborne properties, it is compatible with water, ensuring optimal performance and application versatility.

allnex

ACURE™ 510-170

ACURE™ 510-170 serves as an exceptionally fast-drying topcoat designed for applications in marine, protective, and various premium, non-isocyanate topcoat systems. ACURE™ 510-170 includes outstanding hardness development, excellent outdoor durability, high cross-link densities, and remarkable chemical resistance. ACURE™ paints showcase extended pot lives and adjustable open times.

allnex

BECKOPOX™ EM 2120w/45WA

BECKOPOX™ EM 2120w/45WA is a dispersion and liquid within the epoxy and epoxy derivatives chemical family, functioning as a binder, resin, and corrosion inhibitor under CASE Ingredients. Targeting automotive and transportation, paints and coatings, and building and construction sectors, it stands out with APEO-free, formaldehyde-free, and VOC-free labeling. This product offers corrosion resistance, a balanced set of properties, low flash rust, and matting features. Suitable for 1K coatings, epoxy coatings, primers, and waterborne coatings, it is compatible with epoxies and adheres well to metal and wood substrates.

allnex

SETAQUA® 6782

SETAQUA® 6782 is an aqueous coating that is specifically made for wood surfaces and is intended for use in a variety of building and construction applications. With an emphasis on weather resistance and a well-rounded collection of characteristics, this coating guarantees exceptional performance. It is the perfect option for wood coatings and finishes in both residential and commercial settings because of its water resistant characteristic, which provides an additional layer of protection.

allnex

BECKOPOX™ EP 384W/53WAMP

BECKOPOX™ EP 384W/53WAMP is an epoxy- and epoxy derivative-based binder and resin by CASE Ingredients. Tailored for diverse markets such as automotive and transportation and paints and coatings, it offers corrosion resistance and enhanced chemical resistance. This liquid dispersion, known for its multi-substrate adhesion, is suitable for various applications, including automotive OEM coatings, marine coatings, and industrial coatings on metal surfaces.

allnex

SETAQUA® 6718

SETAQUA® 6718 is a waterborne coatings dispersion that works well for industrial coatings as well as building and construction. This product is suitable for both metal and wood surfaces. It guarantees good clarity both in the can and on the dry film, allowing for quick air drying and ideal sanding results. SETAQUA® 6718 offers exceptional water and chemical resistance together with high hardness and good stacking qualities. This dispersion improves the performance of formulas and is perfect for use in industrial coatings and paints used in the building and construction industry.

Chemical Partners Industry

Chempart® SC-100

Chempart® SC-100 is Polysaccharide Resin that uniquely processed film forming resin. It is a coactive resin which will form a hydrogen bond with alkyd and stabilize water molecules with the enamel coating. Surrounds the dispersed water droplets impeding their attraction with each other, promoting steric stabilization of the water-in-oil emulsion. During water evaporation (Chempart SC100) prevents voids and pinholes from forming in the film, and works to maintain the film's durability and performance.

Visen Industries Ltd

VISICRYL 7557

Visicryl 7557 is used for high viscosity for textured finishes and paints

Polynt Group

Rezimac® 62-6260

Rezimac® 62-6260 is a silicone modified, soya-based alkyd exhibiting excellent color and gloss retention that lengthens time to repaint. Enamels formulated with this resin meet the requirements of specifications TT-E-490E and TT-E-1593B. Manufactured in North America. All components of this product are listed on the DSL.

Touch Chem

Touch OTAL 2030

Touch OTAL 2030 is an acrylic based polymer that have high efficiency metal pigment affinity group to prevent seeding and re-agglomeration of aluminum pigment upon storage. Touch OTAL 2030 with it high affinity to the metal surface, can wet and prevent those small to medium size aluminum to re-agglomerate after storage. Touch OTAL 2030 also proven in aluminum paste manufacturing process that by incorporating Touch OTAL 2030, the yield of the desire particles size is 20% higher. During the manufacturing process of the aluminum, Touch OTAL 2030 immediately stabilize the grinded aluminum to prevent them to re-agglomeration and this improve the yield of desire particles tremendously.

Georgia-Pacific Chemicals

GP BKS-2605

GP® BKS-2605 heat-reactive phenolic resin solution in ethanol and n-butanol is formulated to provide chemical resistance for protective coatings for rigid metallic substrates.

Georgia-Pacific Chemicals

GP BLS-2700

GP® BLS-2700 coating resin is a liquid heat-reactive phenolic resin solution in ethanol for coatings of rigid metallic substrates. It provides excellent intercoat adhesion and is effective as a metal primer.

Georgia-Pacific Chemicals

Curaphen 40-830 B55

allnex

EBECRYL® 870

EBECRYL® 870 is a dark, clear liquid radiation-curable coating designed for paints, coatings, printing, and packaging markets. With a bio-based composition and a low carbon footprint (PCF), it stands out for being solvent-free and voc-free. Ideal for building and construction paints, wood coatings and finishes, and packaging coatings, including overprint varnishes, this product supports offset and lithographic printing applications. It offers versatile application methods such as curtain coating, gravure coating, lithography, roller coating, and screen coating on wood substrates.

allnex

EBECRYL® 3605

EBECRYL® 3605 is a partially acrylated ester of a bisphenol A-type epoxy resin, featuring both acrylate and epoxy functionalities. It can be cured with UV radiation using a mixed photoinitiator system comprising free radicals and cationic photoinitiators. This resin has been specifically developed for applications demanding enhanced coating performance properties beyond what conventional UV/EB curing alone can achieve. The end use for EBECRYL® 3605 is in radiation-curable coatings. With a focus on eco-friendly practices, this product carries labeling claims of low carbon footprint (PCF), solvent-free, and VOC-free.

allnex

SETAQUA® 6515

SETAQUA® 6515 is designed specifically for 2K (2 component) coatings and is a great option for waterborne coatings' top coats and clear coats. It works well for automotive OEM coatings, marine coatings, industrial coatings, and wood coatings and finishes. It is made to be applied on metal and wood surfaces. With features that ensure longevity in outdoor situations, such as improved mechanical and chemical resistance, this multipurpose product stands out.

Georgia-Pacific Chemicals

GP CL-7002

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

allnex

EBECRYL® 600/30DP

EBECRYL® 600/30DP is a bifunctional epoxy acrylate diluted with 30% dipropyleneglycol diacrylate (DPGDA). Recognized for its low odor, light color, and swift cure response, it features a long pot life, faster cycle time, high gloss, low-temperature curing, improved chemical resistance, and hardness. Primarily used in radiation-curable coatings, it finds applications in wood coatings, furniture coatings, and industrial coatings.

Kaneka North America LLC

SILYL® SAX260

KANEKA SILYL® SAX260 is a Silyl-Terminated Polyether (STPE) used as a base resin for producing high performance moisture cure sealants, adhesives, and coatings. SILYL SAX260™ has performed successfully in various industrial applications and provides well-balanced properties such as durability, reactivity, and storage stability. This unique and highly valued balance of attributes is derived from the polyether polymer backbone coupled with the methyldimethoxysilane functional groups.

allnex

VANCRYL® 68

VANCRYL® 68 is characterized by its solvent-free nature and is available in a solid flake form. Designed for the paints and coatings as well as the printing and packaging industries, this product is particularly suited for applications in packaging coatings and flexography inks, showcasing notable compatibility with acrylics.

allnex

SETAQUA® 6704

SETAQUA® 6704 is designed for outdoor durability in the building and construction sector. This liquid coating is specifically designed to be used in roofing and building envelope decorative paint applications. It provides an opaque white finish. SETAQUA® 6704's distinct composition guarantees a strong protective layer, extending the life of coatings in a variety of settings. Dependability and resilience are features that make this waterborne coating perfect for EIFS and insulation applications.

allnex

SETALUX® 1756 VV-65

SETALUX® 1756 VV-65 is a thermosetting hydroxylated acrylic copolymer designed for combination with amino resins. This formulation boasts high solids content at spraying viscosity, ensuring good durability and gloss. Ideal for solventborne coatings and solventless/high solids coatings. In the coatings, adhesives, sealants, and elastomers (CASE) category, it serves as a high-performance binder and resin. Applications include automotive OEM coatings and industrial stoving systems. Its appearance is characterized by being clean, clear, and free from extraneous matter.

IGM Resins

Omnilane OC1005

Omnilane OC 1005 cycloaliphatic epoxide is miscible with a wide range of organic solvents, including acetone, ethanol, and benzene. It’s low viscosity and good fluidity make it suitable for use in bulk manufacturing. The long term stability at ambient temperature is very good. It will react in the presence of acid anhydride curing agents at higher temperature. Omnilane OC 1005 when cured is suitable for use at high temperatures between 200 - 250°C for long periods.

MPC-PROKIM Chemicals

MPC-PROKIM Chemicals AGSL70

MPC-PROKIM Chemicals AGSL70 is an air drying long oil alkyd resin based on soya bean fatty acid. It provides a very clear varnish. It presents a good gloss retention, a good durability, a good color stability, a good wettability, a good high-build, a sufficient spread, a good brushability as well as a good yellowing and aging resistance.

D&R Dispersions and Resins

Akryvil® WSA 4612

Akryvil® WSA 4612 is a Styrene-acrylic dispersion used for Decorative, Primer Interior and Exterior paints. It has dispersions of acrylic, styrene acrylic and vinyl acrylic copolymers are high-quality products. Their production process is based on various parameters such as dry matter content, viscosity, average particle size, vitrification temperature or minimum film formation temperature. This allows us to supply raw materials perfectly adapted to the needs and expectations.

Reichhold

KELSOL® 3961-B2G-75

KELSOL® 3961-B2G-75 is a water-dispersible, chain-stopped alkyd designed to give excellent corrosion resistance in addition to a very fast dry rate

Polynt Group

Aquamac® 477

Aquamac® 477 styrene acrylic latex polymer was designed specifically for clear wood finishes and provides excellent clarity, hardness and mar resistance. Manufactured in North America. All components of this product are listed on the DSL.