Paints & Coatings
5,252 products found in Paints & Coatings
Chroma-Chem® 844-9957 colorants are designed specifically for use in high-performance, non-aqueous, industrial coatings. The various pigments in this colorant line are dispersed in a proprietary acrylic resin vehicle. This vehicle provides excellent wetting and dispersing properties superior to other acrylic resins. The solvents used are a blend of Propylene Glycol Monomethyl Ether Acetate (PMA) and Naphthol Spirits. They are non-Red label and conform to Rule 66 and similar regulations. Each colorant contains a carefully selected and unique blend of vehicle, solvent, pigment and surfactants to yield acceptance in a wide range of non-aqueous coatings applications. The individual Chroma-Chem® 844 colorant formulations are designed to minimize the surfactant and additive levels needed to achieve colorant acceptance in a variety of coatings systems. A recent effort has been made to remove APEO additives from the 844 colorants. The back of the product sheets shows information about each colorant in the line, including whether the colorant is formulated with APEO additives.
Chroma-Chem® 754-7070 color packs for epoxy coatings consist of a blend of various organic and inorganic pigments milled in a solvent-free liquid epoxy. These color packs use an additive package and a small amount of diluent to provide excellent handling for in-plant or job-site tinting. These color packs are designed as a single-color package that can be mixed into a clear base to produce 24 colors that are typically found in the palette for concrete protective coatings applications. Each color comes pre-blended to match various shades of gray, as well as tan, blue, green, and Red. A Safety Yellow and Safety Red are also included in the color palette.
HYDRASPERSE™ EU EYE1
Hydrasperse™ EU EYE1 colorants offer high color strength and consistency for in-plant production use. Their excellent stability from batch to batch provides a good base for reproducible and economical colors. This colorant range provides a good price to performance balance, while also offering a number of economical colorants for a lower overall tint cost. High performance colorants are available within the Hydrasperse EU product line to satisfy the most premium quality requirements needed for exterior use. The vast colorant selection of Hydrasperse EU contains 26 high concentrated colorants, providing a wide color space. Hydrasperse EU colorants are low-VOC . All in-plant colorants are controlled both gravimetrically and volumetrically for factory level precision.
Zinc-free calcium modified silica gel HEUCOSIL CTF is a highly effective anti-corrosive pigment designed to meet the specific performance requirements for coil coatings and other thin-film applications.
Tinox Chemie GmbH
CR-1120 is a rutile universal TiO2 pigment from the chloride process which can be used in paints and coatings as well as in plastics. Produced with advanced technologies, particularly in terms of particle size control, this type of pigment shows excellent optical properties. TINOX CR-1120 convinces in the pigmented system by strong hiding power and tinting strength, excellent gloss properties, excellent dispersibility and a blue undertone. CR-1120 has an inorganic surface treatment in combination with a special organic post-treatment, which qualifies wide usage in high gloss paints, coatings for sheets, powder paints and polyolefins, PVC, ABS resins.
Solvasperse™ AK AWH1
Solvasperse™ AK AWH1 is solvent-based and Reduced VOC, specially developed for in-plant tinting. The range of Solvasperse AK colorants provide excellent compatability, consistent performance and minimal effect on paint properties. Developed for medium-oil architectural alkyd paints, these colorants are formulated with alkyd resin and aromatic-free solvents. The Solvasperse AK colorants have a Reduced VOC content of <300 g/l and newly approved anti-skinning agent. This guarantees compliance with the current EU directive, provided that the paint itself meets the requirements. Two transparent iron oxide colorant options are available for wood finishing applications. Because of their transparent nature, the wood structure remains visible. At the same time, the colorant does not affect important physical properties of the paint, such as weather resistance and UV barriers.
HEUCOPHOS® ZPO shows excellent protective behaviour in many binder systems, such as alkyd resins and physically drying systems, due to its special organic modification fixed on the particle surface.
Chroma-Chem® 844-0451 colorants are designed specifically for use in high-performance, non-aqueous, industrial coatings. The various pigments in this colorant line are dispersed in a proprietary acrylic resin vehicle. This vehicle provides excellent wetting and dispersing properties superior to other acrylic resins. The solvents used are a blend of Propylene Glycol Monomethyl Ether Acetate (PMA) and Naphthol Spirits. They are non-Red label and conform to Rule 66 and similar regulations. Each colorant contains a carefully selected and unique blend of vehicle, solvent, pigment and surfactants to yield acceptance in a wide range of non-aqueous coatings applications. The individual Chroma-Chem® 844 colorant formulations are designed to minimize the surfactant and additive levels needed to achieve colorant acceptance in a variety of coatings systems. A recent effort has been made to remove APEO additives from the 844 colorants. The back of the product sheets shows information about each colorant in the line, including whether the colorant is formulated with APEO additives.
TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.
HEUCODUR® Blue 550
HEUCODUR® Blue 550 is a Complex inorganic color pigment
TiONA® 128 is a multi-purpose, blue tint tone, chloride-process rutile titanium dioxide pigment, designed to give an outstanding combination of ease of dispersion, excellent optical properties and good durability in a wide range of coating applications.
Heubach GmbH Zinc Phosphate ZP 10
Zinc Phosphate ZP 10 is a white anti-corrosive pigment for the application in Protective Coatings.
HEUCORIN® RZ is an organic corrosion inhibitor for the application in Protective Coatings
Chroma-Chem® DH-02876 plasticizer-based dispersions consist of organic and inorganic pigments suspended in a phthalate-free plasticizer. The primary plasticizer is 1,2-cyclohexanedicarboxylic acid diisononyl ester. At Chromaflo, we give special consideration to pigment types in the custom color matching process. Pigments may be selected according to a variety of criteria, including weathering, UV stability, food contact, non-heavy metals, low abrasion and cost considerations. Along with these standard colors, Chromaflo Technologies offers custom color matched blends using the masstones in this line. These blended colors, or color packs, can be matched to almost any color.
COLTEC™ B KU
Coltec™ B KU universal colorants has been specially developed to meet the performance needs of decorative paints. Coltec B colorants are suitable for interior and exterior latex paints, long oil alkyds, enamels and wood stains. This technology contains propylene glycol as co-solvent. VOC is less than 300g/l. Pigmentation used in Coltec B Colorants allows a wide color area to be achieved with both interior and exterior quality color formulas. The universal colorant systems can be extended with inorganic colorants and/or transparent iron oxide colorants.
Tint-Ayd® WD 2018
Tint-Ayd® WD 2018 work to enhance the appearance of final coatings that require a clean, pure shade of White. The Tint-Ayd® Toners range, made up of three toners, can be used to Reduce Yellowness or increase hiding power, depending on the desiRed effect on the White product. The toners are suitable for either universal, alkyd-based or waterborne coating systems.
HEUCOSIN™ Blue G 1737
HEUCOSIN™ Blue G 1737 is a Tailor-made pigment preparation for coatings
TiONA® AT-1 is a technically pure, dry milled anatase titanium dioxide pigment. It is a versatile product, suitable for pigmentary applications where the high whiteness and blue masstone of anatase TiO2 is preferred and for specialty applications where a Ti precursor is needed.
Chroma-Chem® UCD-5740V colorants is designed for broad use in modern coatings. These products have closely controlled color strength and viscosity to permit reproducible color matches by volumetric machine dispensers or by weight measurement in the plant. The colorant vehicle consists of a proprietary, low-molecular weight, acrylic resin dissolved in propylene glycol monomethyl ether (PM) acetate. This combination provides superior performance and compatibility with industrial coatings based on most resin chemistries. UCD® V colorants are thixotropic, which makes them resistant to separation by settling or syneresis. The PM acetate solvent assures long package life and freedom from caking and drying in opened containers or dispensing equipment.
Pan Technology Inc.
Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.
Colortrend® XC-8745513 colorants are low-VOC, high-strength, pourable color pastes recommended for factory tinting of emulsion and water-based paints. These colorants have a 6 minimum fineness of grind Hegman Gauge [<20µm] which makes them suitable for the tinting of latex paints. The 874 XC Series is comprised cost-effective products containing high quality pigments. Strength is controlled to ±2% vs. standard and Î”E <0.6 vs standard. They are suitable for dispensing gravimetrically and volumetrically. They are highly compatible with all types of latex. Colortrend® 874 XC colorants also offers technical advantages such as improved gloss and hardness and increased opacity in deep tone colors.
HEUCOPHOS® CAPP gives good results in water based two-part epoxy resins and coating systems based on dispersions.
Chroma-Chem® UCD-1625VXS colorants are designed for broad use in low-VOC, solvent-based coatings. These products have closely controlled color strength and viscosity to enable reproducible color matches by volumetric machine dispensers or weight measurement in the plant. The colorant vehicle consists of a low-molecular weight, automotive type, acrylic resin dissolved in methyl acetate and parachlorobenzotrifluoride (PCBTF). This combination provides compatibility with most modern solvent-based coatings with no added VOCs (according to the US EPA). The UCD® VXS colorants are thixotropic, which makes them resistant to separation by settling or syneresis. The colorants contain similar components that are found in the UCD® V line colorants. However, the properties of the exempt solvents when compaRed to PM Acetate will mean that the colorants may perform differently than the UCD® V line colorants and are not drop-in replacements. The tint strength of the UCD® VXS colorants is controlled by volume to ±2% to ensure optimal tinting performance in volumetric dispensing equipment. The density and viscosity of the colorants are also tightly controlled to provide consistent in-plant tinting capabilities.
Colortrend® 808-0018 colorants are low odor and possess excellent rheology, while also having minimal impact on paint properties. The COLORTREND® 808 line contains colorant options for higher performance. This offers broader color space potential for brighter colors and solutions for better durability, superior fade resistance and improved opacity. A high concentration allows lower subsequent usage of the high strength versions. The tight quality specifications make it possible to use COLORTREND® colorants both volumetrically for point-of-sale and gravimetrically for in-plant use.
Chroma-Chem® DH-02443 plasticizer-based dispersions consist of organic and inorganic pigments suspended in a phthalate-free plasticizer. The primary plasticizer is 1,2-cyclohexanedicarboxylic acid diisononyl ester. At Chromaflo, we give special consideration to pigment types in the custom color matching process. Pigments may be selected according to a variety of criteria, including weathering, UV stability, food contact, non-heavy metals, low abrasion and cost considerations. Along with these standard colors, Chromaflo Technologies offers custom color matched blends using the masstones in this line. These blended colors, or color packs, can be matched to almost any color.
HEUCOPHOS® ZPA has a higher phosphate content than zinc phosphate. The absence of basic components in the pigment makes HEUCOPHOS® ZPA a versatile anti-corrosive pigment for many applications.
AltroColor P 4508
AltroColor P 45000 Color Pastes are based on a vegetable oil based on renewable raw materials and have been developed particularly for the coloring of polyurethane systems. As our AltroColor P 4500 Color Pastes Series are based on a reactive/crosslinkable binder, a full integration into your polyurethane system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties.AltroColor P 4508 is light-yellow colored.
VYNAMON™ Yellow 118303
VYNAMON™ Yellow 118303 is a High-performance organic pigment for plastics
Excellent results have been achieved by applying HEUCOPHOS® ZMP in water based coating systems using one-part polyurethanes and acrylics.
Tikon™ 33 is a general purpose rutile titanium dioxide pigment, manufactured by the latest sulfate process technology. It can be used in a wide range of applications that require exceptional dispersion, high whiteness and good durability.
Chroma-Chem® 896-7201 colorants are designed for use in a wide variety of water-based industrial coatings. These colorants can be used in water-Reducible and emulsion coatings in both air-dry and baking systems. They are low-VOC and glycol-free and based on a water-Reducible acrylic resin. This line is used in volumetric and gravimetric dispersers. Tint strength, color difference, and viscosity are controlled to ensure optimal performance in most dispensers. Because the quality of the colorants are tightly controlled, they can also be used for in-plant tinting applications. They have little or no effect on gloss, dry time, water resistance, hardness, corrosion, foaming or other coating properties.
CHROMA-CHEM® Tint-Ayd ST 8600
Chroma-Chem® Tint-Ayd ST 8600 colorants are solvent-based acrylic colorants for tinting high-performance industrial coatings. These colorants have broad compatibility and are an exceptional universal tinting system for multiple coatings chemistries. Tint- Ayd® ST & BB colorants are stable, free-flowing, solvent-based concentrates recommended for use in high- performance 1K or 2K solvent-based industrial coatings. They have excellent compatibility with a wide variety of coatings and a rheological profile suitable for most tinting applications. These colorants are based on a thermoplastic acrylic resin which provides broad compatibility with multiple coatings chemistries. These colorants are thixotropic in order to resist pigment settling and syneresis.
TiONA® 121 is a general purpose, blue tint tone, chloride-process, rutile titanium dioxide pigment. It offers a blend of good optical performance and durability making it suitable for use in a wide range of interior and exterior coatings and plastics applications.
Ultramarine RS 02
Ultramarine RS 02 is a medium tinting strength Ultramarine blue with a very green undertone. It is heat fast, lightfast, easy to disperse and approved worldwide for use in sensitive applications such as food contact plastics and cosmetics.Ultramarine RS 02 is widely used alone to obtain a bright, transparent shade of blue, or in combination with other pigments such as titanium dioxide, with which it gives an attractive pastel shade.Ultramarine RS 02 is intended as a general purpose pigment with applications in paint, ink, soap, cosmetics and many other industries. Ultramarine RS 02 can be used in plastics.
AQUIS™ Green 90071
Pigment Green 7 dispersion based on a solvent and APEO free non-ionic and anionic surfactant package. This free flowing pumpable dispersion is especially designed for coloring decorative coatings and other waterborne binder systems.
Organic Dyes and Pigments
OrcoSperse™ Black 2835 100 g/L
OrcoSperse™ Black 2835 100 g/L is an organic aqueous pigment dispersions for textiles and nonwovens are specifically designed for printing, padding, garment dyeing, and spray applications. The wide shade range of these product lines, including bright fluorescent and earthtone colors, can be used to develop unique shade and physical special effects–just call our technical staff to develop the perfect shade and process to achieve your desired effect.