Paints & Coatings
1,618 products found in Paints & Coatings
The Mitsubishi Chemical Group
jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.
MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.
BECKOPOX™ EH 694
BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance.
SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting hardener for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700 produce outstandingly smooth, dead matte finishes.
SETAQUA® B E 270
SETAQUA® B E 270 is water thinkable, oil-free, polyester resin. In combination with water-thinkable amino resins in the formulation of industrial stoving coatings and aqueous stoving primer surfacers for online automotive finishing, both with low co-solvent content.
Tinox Chemie GmbH
CR-1120 is a rutile universal TiO2 pigment from the chloride process which can be used in paints and coatings as well as in plastics. Produced with advanced technologies, particularly in terms of particle size control, this type of pigment shows excellent optical properties. TINOX CR-1120 convinces in the pigmented system by strong hiding power and tinting strength, excellent gloss properties, excellent dispersibility and a blue undertone. CR-1120 has an inorganic surface treatment in combination with a special organic post-treatment, which qualifies wide usage in high gloss paints, coatings for sheets, powder paints and polyolefins, PVC, ABS resins.
TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.
TiONA® 128 is a multi-purpose, blue tint tone, chloride-process rutile titanium dioxide pigment, designed to give an outstanding combination of ease of dispersion, excellent optical properties and good durability in a wide range of coating applications.
GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.
Esacure ONE is a difunctional alpha-hydroxy ketone photoinitiator. It is a highly reactive difunctional photoinitiator particularly suitable for clear systems. Due to its molecular structure it is particularly suitable for all systems where low VOC, low migration and low extraction values are needed (food packaging).
Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.
POLURENE T 70
POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.
CERETAN® ME 0825
CERETAN® ME 0825 is a spherical, micronized non polar Polyethylene wax and have applications as Paints and coatings, e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, and as Printing inks e.g. gravure-, overprint-, screen-, flexo-, heatset-, sheetfed- and coldset inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.
Reacrone PCL-100 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.
Jubail Chemical Industries
Araldite® GT 7071
Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.
SASOLWAX H1N4-G is a Micronized FT Hardwax has Particle size D50: 8µm D90: 18µm, provide slip and enhanced scratch/rub resistance and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.
GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.
GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.
Catana™ CAA 2340
Catana™ CAA 2340 is a solid consisting of dodecyltrimethylammonium bromide. Catana™ CAA 2340 can be used as catalyst for polymerization of e.g. Coatings and powder coatings.
TiONA® 121 is a general purpose, blue tint tone, chloride-process, rutile titanium dioxide pigment. It offers a blend of good optical performance and durability making it suitable for use in a wide range of interior and exterior coatings and plastics applications.
Huber Engineered Materials
Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE.
Jubail Chemical Industries
Araldite® GT 6084
Araldite® GT 6084 is an unmodified solid epoxy resin based on Bisphenol A.
CERETAN® MX 9820
CERETAN® MX 9820 is a spherical, micronized Polyolefin wax. This product have applications in Printing inks, especially for gravure- and flexo inks, Paints and coatings, especially for powder-, furniture-, parquet- and industrial coatings and Masterbatch.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.
Microfill K. Zafranas
Zetatalc EW 10
Zetatalc EW 10 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 10 renders these unique properties it possesses wherever it is applied
Huber Engineered Materials
Spacerite® S-11 Alumina Trihydrate (ATH)
SpaceRite S-11 is a fine crystalline, aluminum trihydroxide with uniform particles averaging 1/4 micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particlesize distributions. SpaceRite S-11 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.
BARTEX® 65 is a white, barium sulfate extender pigment designed to increase the efficiency of titanium dioxide. BARTEX features controlled particle size, high whiteness and brightness, high specific gravity, and chemical inertness. TOR Minerals International produces different BARTEX grades to meet your specific needs, differentiated by particle size and whiteness. Our chemistry is the highest quality of any producer in the United States.
CERETAN® MTZ 9335
CERETAN® MTZ 9335 is a spray micronized Fischer-Tropsch-wax, coated with Zinc.Properties are high matting, no impact on color output, distribution and weather durability, no impact on mechanical properties. Applications as additive for powder coatings.Zinc-compound coated wax, which provides excellent matting at higher curing temperatures starting from 180–230°C, where standard matting agents fail.
Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.
Tikon™ 33 is a general purpose rutile titanium dioxide pigment, manufactured by the latest sulfate process technology. It can be used in a wide range of applications that require exceptional dispersion, high whiteness and good durability.
Spolchemie CHS-EPOXY 130
CHS-EPOXY 130 is a Medium molecular weight "3 - type" epoxy resin.
GEO Specialty Chemicals Inc
DMPA® Dimethylolpropionic Acid is a unique and versatile hindered diol molecule with both hydroxyl and carboxyl functionality.
CERETAN® MXF 9820 D
CERETAN® MXF 9820 D is a spherical, micronized Polyolefin wax, coated with PTFE.This product have applications as Paints and coatings, Printing Inks.PTFE coated functional blend, which helps to reduce the amount of PTFE used in your system by more than 10%. It provides better clarity and improved surface properties due to immediate performance of PTFE on the surface.
SASOLWAX L6530A is extra fine micronized FT Hardwax provide slip and scratch resistance and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.
SASOLWAX H1N4 is a spherical micronized FT Hardwax, provide slip and enhanced scratch/rub resistance, gloss retention and good overprintability in flexographic and gravure inks, paste inks, hydrophobicity as well as surface protection in Wood coatings, degasing and pin hole reduction in powder coatings.
Sasol Chemicals SASOLWAX C80-G is a highly crystalline, micronized Fischer-Tropsch wax for the inks, paints, coatings and adhesives market. It supports formulations where defined melting behavior, surface protection and matting are required. SASOLWAX C80-G is used in powder coating formulations providing matting, slip, degassing, and improved transfer efficiency. With the melting point of 86 °C, low viscosity, and excellent hardness even at elevated temperatures SASOLWAX C80-G provides superior performance especially when post-dosed. SASOLWAX C80-G is also used in paints, wood coatings and corrosion protection formulations to modify surface and application properties.
ADDITOL® P 932
ADDITOL® P 932 is an aliphatic urethane prepolymer crosslinking agent for use with hydroxyl terminated polyester resins for the manufacture of polyurethane powder coatings. Formulations based on ADDITOL® P 932 exhibit excellent outdoor resistance when used with CRYLCOAT® 2839-0 (72/28 ratio) and CRYLCOAT® 2845-0 (81/19 ratio).