products in Paints & Coatings: Primer

Leuna-Harze GmbH

Epilox® T 19-27

Epilox T 19-27 is a liquid and solventless blend of standard bisphenol A and bisphenol F epoxy resins with good resistance to crystallization.

Reichhold

KELSOL® 3966-B2G-70

KELSOL® 3966-B2G-70 is a water-dispersible, low-cost, chain-stopped alkyd designed to give excellent corrosion resistance and hot hardness.

Novaresine

Novalkyd M1263-65X

NOVALKYD M1263-65X exibits good anticorrosive properties, therefore it is suggested for industrial primers and matt satin enamels.

Teda Golone Chemical

Teda Golone Chemical GL2820

GL2820 is Low odor, good transparency, good toughness and excellent scratch resistance and suitable for low odor primer and topcoat

MPC-PROKIM Chemicals

MPC-PROKIM Chemicals SO65W70A

MPC-PROKIM Chemicals SO65W70A is an air drying long oil alkyd resin based on soya bean oil. It presents a good gloss retention, a good durability, a good brushability and a good resistance to yellowing.

Synthopol

LIOCRYL AS 615

Aqueous styrene Acrylic emulsion

Leuna-Harze GmbH

Epilox® A 19-02

Epilox A 19-02 is medium viscosity and solventless bisphenol A epoxy resin.

BYK

ANTI-TERRA 250

ANTI-TERRA-250 Controlled flocculating wetting and dispersing additive for aqueous primers, fillers as well as adhesives and sealants to prevent sedimentation of fillers and inorganic pigments. Also suitable for filler slurries.

Silok Chemical

Silok® 4075-General Silicon-Free Defoaming Agent

Silok® 4075 is a silicone free defoamer, with good defoaming and foam suppression ability, and no influence of recoating.

Jubail Chemical Industries

Araldite® GZ471X75

Araldite® GZ471X75 is a medium molecular weight epoxy resin based on Bisphenol A as solvent cut 75% in Xylene. Araldite® GZ 471 X 75 yields similar performance than Araldite® GZ 7071 X 75 but due to lower molecular weight the compatibility with insoluble, acrylics and alkyd-amino combinations is improved.

Union Specialties, Inc.

UNITHANE IC-922 NF

UNITHANE IC-922 NF is a NMP free, low VOC waterbased polyurethane with exceptional adhesion promoting properties. UNITHANE IC-922 NF is designed for use in a formulated primer coat for variety of substrates.

Nippon Paper Industries

SUPERCHLON® E-415

Superchlon® E-415 is developed with special technology are the waterborne chlorinated polyolefin, which shows excellent adhesion to polypropylene substrates and can be used as primers and adhesives.

Polyols and Polymers

POLYTONE® P140

POLYTONE™ P 140 is a modified phenolic resin for use with drying oil, such as linseed & tung oil.

Atul Ltd

LAPOX® AH-712

LAPOX® AH-712 is medium viscosity polyamidoamide based on dimer fatty acid and aliphatic polyamine. It is designed to use with liquid or epoxy resin solutions (type-1) to produce protective and decorative solvent based coatings with an excellent flexibility, adhesion to most substrates and best corrosion protection.

KEMAT Polybutenes

Polybut™ 6

Polybut™ 6 is a low molecular weight conventional polybutene.

Polynt Group

Rezimac® 204-1144

Rezimac® 204-1144 is recommended for use in quick-dry primers for general metal finishing, such as fast-dry topcoats for drums and trash bins; good adhesion and water resistance.

ACCM

ASCOM 20

ASCOM 20 limestone powder is the highest whiteness and high purity with low iron, silica and magnesium levels. Limestone is derived from enormous reserves.

Patcham FZC

Pat-Add DA 1666

PAT-ADD DA 1666 is a liquid pigment wetting and dispersing additive for solvent-borne architectural and industrial paints. In addition the product is utilized as a polar activator to provide excellent gelling in organophilic bentonites.PAT-ADD DA 1666 acts as a wetting agent, preventing pigment agglomeration and sedimentation

IMI Fabi

IMI Fabi HTP3/7

IMI Fabi HTP3/7 is used as High solids - Marine & protective Primers - Renders.

Thiele Kaolin Company

KAOPLATE™ 27

KAOPLATE™ 27 is water-washed, coarse kaolin clay is perfect for architectural coatings and e-coat primers. Its low oil absorption will allow for higher loadings in paints and coatings. KAOPRIMETM 27 is designed for use in water-based systems. Its large particle size, whiteness, and low oil absorption combine to make it a cost-effective filler.

Microfill K. Zafranas

Zetafil cst CA

Zetafil CST CA is described on a very white, pure crystalline CaCO3. It is coated by an organic agent which transforms the surface of the inorganic particles to an organic one, thus achieving full compatibility of the filler to an organic media. Due to its special particle size distribution, Zetafil CST CA is easily dispersed (especially in compounds for cables). Zetafil CST CA’s brightness value enables formulators to economize in Titanium Dioxide by reducing its percentages in the end product.

Pigmentan

Pigmentan PIGMENTAN 465M-FG

Pigmentan PIGMENTAN 465M-FG is a premium environmentally friendly anticorrosive pigment. Suitable for thin film solvent based primers. Excellent cost effectiveness and performance.PIGMENTAN 465M-FG is useful both for low film weights, and for easier dispersion of the anti-corrosive pigment into the paint system.

Anacarda

CARDAMINE H 762 BX65

CARDAMINE H 762 BX65 is one of a series of specially formulated phenalkamine curing agents developed for use with liquid and solid epoxy resins. This grade is pre-diluted in xylene. CARDAMINE H762BX65 is characterized by tolerant mix ratio, excellent hydrophobic character and subsequent corrosion resistance, good cure at low temperature and under adverse conditions with a high degree of flexibility and toughness.

Tulco INC

Tulco INC HM-250

Tulco INC HM-250 is for low to moderate thickening, free flowing, anti-caking and silicone rubber application.

Mikron-S

Mikron-S CARBON BLACK GP62

Mikron-S CARBON BLACK GP62 is Gas Black with high Coloring, it is designed for high performance application of Industrial Coating, primer, Powder Coating, Metallic, Archiectural, Gravure, Embossed, Silk Screen, Masterbatch, Synthetic Leather and Color Paste. This Products is easy for dispersion, strong darkness and red tone, and high gloss.

ichemco

ichemco Resina R 35

RESINA R 35 is a cyclized rubber derived from natural rubber. It gives high viscosity solutions.

Patcham FZC

Pat-Add AF 62

PAT-ADD AF 62 is silicone free de-airing agent for use in solventborne coatings. PAT-ADD AF 62 is a very strong defoamer, most suitable in wood-coatings and clear lacquers.

PRP Resins

PRP Resins R121-60

PRP Resins R121-60 is a Short Oil Alkyds.

Hangzhou Heidis New Material

Hangzhou Heidis New Material HT-S306

HT-S306 belongs to self-activating organic bentonite, can be added at any stage of painting, without pre-gels and polar activators, easy to disperse, dispersion fineness can reach less than 40um, suitable for medium to low polar solvents.

TUNASRESIN

TUNASRESIN 4603-55

Tunasresin 4603-55 is Fast dry, excellent gloss, good durability, good yellowing resistance & color retention.

Zhejiang Wansheng

Zhejiang Wansheng WSCM-1104

WSCM-1104 has low viscosity, fast curing speed, low surface treatment requirements, excellent adhesion, balanced mechanical properties, and lighter color.

YUTA

YUTA AT-46HN

Yuta AT-46HN is used as color coat for domestic appliance and industrial coating.

euroMinerals

euroMinerals indolo

euroMinerals indolo is more than a simple filler. It is finely and ultra-finely ground pure dolomite with the highest whiteness is produced according to customers’ requests and their application requirements, with fineness between 8µm and 60µm top cut.

IMI Fabi

IMI Fabi CHD6

IMI Fabi CHD6 is used as High solids - Marine & protective Primers - Renders.

Hoffmann Mineral

AKTIFIT PF 111

AKTIFIT PF 111 is a Calcined product based on SILFIT Z 91 coated with alkyl silane.

MACRI CHEMICALS

MACRI CHEMICALS TIOX 271

MACRI CHEMICALS TIOX 271 is a rutile titanium dioxide coated with aluminum and silicon. Which has Good hiding power especially at low pigment concentration and its very fine powder with easy dispersibility. It also has excellent affinity with all binders both in the aqueous and in the solvent phase.