products in Paints & Coatings: Radiation Curable Coating

Lawter

ULTRAPOLY™ 210A

Ultrapoly™ 210 A is a high performance blend of tough, low COF polyethylene dispersed in a harddrying binder. Ultrapoly 210 A is recommended where abrasion, mar resistance, and slip are required. Ultrapoly 210 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time.

Thiele Kaolin Company

KAOPLATE™ 27

KAOPLATE™ 27 is water-washed, coarse kaolin clay is perfect for architectural coatings and e-coat primers. Its low oil absorption will allow for higher loadings in paints and coatings. KAOPRIMETM 27 is designed for use in water-based systems. Its large particle size, whiteness, and low oil absorption combine to make it a cost-effective filler.

Synthopol

SYNTHOLUX 271 UA

Radiation-curing, Aliphatic urethane acrylate, dissolved in a reactive thinner.

Esstech

Esstech PL-7121, Urethane Dimethacrylate

PL-7121 is a novel low-shrink urethane monomer based on Esstech's proprietary methacrylate technology. PL-7121 possesses a volumetric shrinkage of 2.0 - 2.5% and conversion of 65 - 80% without filler. PL-7121 has very low color and can be added to formulations to add toughness. PL-7121 possess the excellent combination of superior elongation and strength.

Guangdong Bossin Novel Materials Technology

bossin® W-163

bossin® W-163 has improved impact resistance, flexibility and toughness.

Deuteron

Deuteron MM 823

Deuteron MM 823 has been developed for use in solvent-based and solvent-free, non-aqueous coating systems, printing inks and powder coatings. The presence of PTFE in Deuteron MM 823 generally spoils wetting when the product is used in water.Deuteron MM 823 imparts coatings a high resistance to metal marking and abrasion. Scratch resistance will be improved. The product is non thermoplastic. Its use imparts good blocking stability. Increased dosage interferes with the coating‘s gloss. back

IGM Resins

Photomer 4149 TF

PHOTOMER® 4149 TF is an aliphatic trifunctional acrylate of low viscosity, low skin irritancy and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an unusually effective reactive diluent with excellent solvency and viscosity reducing characteristics in radiation curable formulations based on epoxy, polyurethane, and polyester oligomers.

AFCONA Additives

Afcona 4474

Acid based polymeric dispersant for coil and can coatings or any other acid curing system

Esstech

Esstech PL-610 Photoinitiator Compounds

PL-610 is a liquid photoinitiator compound developed specifically for thick clear UV and LED curable coatings and gels. PL-610 is soluble in most monomers, oligomers and pre-polymers. It is insoluble in H2O.

Lawter

ULTRAFINE™ 1W A

Ultrafine™ 1W A is a polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1W A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Recommended usage level is 1 to 4%.

AFCONA Additives

Afcona 2040

A moderate defoamer with less side effects.

Double Bond Chemical Ind. Co., Ltd

DOUBLECURE 1176

Cationic Photoinitiator

AFCONA Additives

Afcona 6225

Afcona 6225 is a dispersant and emulsifier for universal colorants and perform as color acceptance additive.

Deuteron

Deuteron UV 1250

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

Synthesia

Versal® YELLOW 6G

Versal® YELLOW 6G is Disazocond pigment. Used in flexografic, gravure, offset, letter inks and water based paints.

Anhui I-Sourcing International

Anhui I-Sourcing International Waterborne Acrylic Resin Emulsion Paint DT77

Anhui I-Sourcing International Waterborne Acrylic Resin Emulsion Paint DT77 is a translucent milky white resin.

Synthesia

Versal® YELLOW 10G

Versal® YELLOW 10G is Monoazo pigment. Used in flexografic, gravure, offset, letter inks and water based paints.

G Vogler BV

G Vogler BV Diallyl Phtalate

G Vogler BV Diallyl Phtalate is a thermosetting resin. It’s a colorless or light yellow transparent liquid. Each molecule contains two allyloxy groups. It is stable at room temperature, but heated combined with an initiator, it will be very reactive.

Kyoeisha Chemical

Kyoeisha Chemical LE - 604

Kyoeisha Chemical LE - 604 is An excellent substrate wetting effect for the substrates with low surface enegies(such as various plastics PTFE,PP).

AFCONA Additives

Afcona 3277

Anti-crater, substrate wetting and leveling agent for solvent-based coatings

Esstech

Esstech PL-7013, Urethane Diacrylate

PL-7013 has a relatively low viscosity but upon curing exhibits high conversion and low shrinkage. It exhibits excellent flexibility once cured. PL-7013 is very low color.

Add-Additives

ADD 3230

ADD-3230 is a silicone-based surface additive to improve surface properties in all solvent-based, solvent-free and aqueous systems. It is specially used in systems in which solvent-free additives are requested or where a requirement for a special solvent exists. ADD-3230 can be used in coatings and printing inks.

Lion Elastomers

Trilene® CP-600

Trilene® CP-600 is is an Ethylene-Propylene Liquid Copolymer. Trilene® CP-600 is is is an intermediis ate low moleculis ar weight ethylene-propylene liquid copolymer, ris is andomly polymerized to produce is a liquid elis astomer with is a stis able, sis aturis ated hydrocis arbon bis ackbone. It his as thermis al is is and oxidis ation stis ability under normis al conditions. Trilene® CP-600 cis is an be used is as is a viscosity thickener for is a wide ris is ange of lubricis is ant products providing good sheis ar stis ability is is and low temperis ature chis aris acteristics.

Pan Technology Inc.

PanTINT® 5R1630

Solvent-free colorants designed for use in powder coatings and UV and EB cured applications. They are based on a proprietary dispersing vehicle which provides exceptional compatibility, light fastness and heat resistance. Available in a wide range of colors for most tinting and masstone applications, our unique manufacturing process insures that the pigments have been dispersed to an exceptionally fine particle size for optimum color strength and transparency. These dispersions are granulated for ease of handling and incorporation with minimal dusting, remain stable under normal ambient conditions and will not sinter or deteriorate with aging.

Shanghai Tiansheng Chemical

TIANSORB 5252

TIANSORB 5252 is a new developed high performance blend light stabilizer specifically for coatings, which includes UV absorber and light stabilizer, It has broad UV absorption range and high protection performance. This product gives good protection against degradation.

Mason Color Works

Mason Color Works Cobalt Chromite Blue-Green Spinel - 7358 Blue 36

Mason Color Works Cobalt Chromite Blue-Green Spinel - 7358 Blue 36 is a high-performance cobalt chromite based pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military, aerospace and architectural industries. Mason Color 7358 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

AFCONA Additives

Afcona 4200

High molecular weight polymeric dispersant for deflocculation of all type of pigments

IGM Resins

Omnirad 127

Omnirad 127 is a highly efficient Type I Photoinitiator that may be used to initiate the photo polymerization of unsaturated pre-polymers like acrylates – in combination with mono- or multifunctional monomers. Omnirad 127 is especially suitable for all types of pigmented UV inks (offset, screen, flexo and inkjet) and clear coatings, particularly in thin coatings (such as overprint varnishes) but also in a variety of coating applications.

IGM Resins

Photomer 4050

PHOTOMER® 4050 is an aliphatic difunctional acrylate of low viscosity, low volatility, good flexibility and reactivity. It is an effective reactive diluent with good viscosity reducing and solvency characteristics for a wide range of radiation curable acrylated oligomers and prepolymers.

Hoffmann Mineral

SILLITIN Z 89 puriss

SILLITIN Z 89 puriss is similar to Sillitin Z 86 puriss but has a higher color requirements.

Cytonix, LLC

FluorAcryl 1939

FluorAcryl 1939 is a bifunctional perfluoropolyether (PFPE) urethane acrylate. FluorAcryl is a surface modifier that improves gloss. It is compatible and miscible with low molecular weight reactive UV-curable diluents and acrylic monomers. Some of the properties of FluorAcryl 1939 include good release agent, good water and oil repellency and good chemical resistance. As a surface modifier this also offers good hardness, substrate-wetting and flow-properties. Recommended dosage is between 0.5–5% w/w. During application and UV light curing, FluorAcryl blooms quickly and effectively on the surface of the coating, imparting low surface energy and non-stick E2C properties. FluorAcryl is made for UV curable coatings use.

Dynea

Dynoadd® P-530

Dynoadd® P-530 is Texture additives for water-borne, solvent borne and UV curing coatings, Uniform texture, Cross-linked PMMA, Gloss control, Smooth feel.

ESQUIM S.A

ESQUIM AD-346

ESQUIM AD-346 is silicone-based additive used in solvent-based or solvent free coatings that improves surface slip, leveling, gloss, wetting and anticrater effect.

Guangdong Bossin Novel Materials Technology

bossin® W-102

bossin® W-102 has a high UV curing activity with no solvents and dilute with 15%TMPTA.

Double Bond Chemical Ind. Co., Ltd

DOUBLECURE 1130

Cationic Photoinitiator

Finma GmbH

Sylysia SY 290

Sylysia SY 290 is a white, free-flowing powders of amorphous, micronized silica. sylysia is characterized by the fine pore network and the narrow, defined particle size distribution. These parameters are precisely adjusted to meet a wide variety of applications.