products in Paints & Coatings: Radiation Curable Coating

Guangdong Bossin Novel Materials Technology

bossin® W-21C

bossin® W-21Cimproves the curing rate the formula and decrease the dosage of photoinitiator in color formula.

IGM Resins

Photomer 6009

PHOTOMER® 6009 is a proprietary, non yellowing, aliphatic urethane acrylate oligomer developed for radiation curable systems. This premium oligomer of low viscosity eliminates the need to melt out the oligomer prior to use. PHOTOMER® 6009 is an excellent film former and it exhibits excellent light stability and outstanding haze, scratch and abrasion resistance.

Finma GmbH

Sylysia SY 256 N

Sylysia SY 256 N is a white, free-flowing powders of amorphous, micronized silica. sylysia is characterized by the fine pore network and the narrow, defined particle size distribution. These parameters are precisely adjusted to meet a wide variety of applications.

Deuteron

Deuteron UV 3100

Deuteron UV 3100 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 3100.Deuteron UV 3100 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 3100 is soluble in these binder systems including common solvents and reactive diluents. back

Tianjin Jiuri Chemical

JRCure 1110

JRCure-1110 is light yellow viscous clear liquid in appearance.

Shanghai Tiansheng Chemical

TIANCURE DETX

TIANCURE DETX is a highly efficient type Il photoinitiator when used in combination with amine synergists (aminobenzoate) to initiate radical photopolymerisation of unsaturated resins such as those based on a prepolymer-eg. acrylates - in combination with mono- or multifunctional monomers as reactive thinners. It is also widely used as a very efficient sensitizer in combination with type I photoinitiators, absorbing at shorter wavelength.

Deuteron

Deuteron UV RM17

Deuteron UV RM17 leads to very resistant surfaces having very pleasant, silky-soft haptical properties. The pasty delivery form enables easy, powder-free handling.Application Radically curing 100 % UV-systems (solvent-free). back

AFCONA Additives

Afcona 4202

High molecular weight polymeric dispersant for deflocculation of all type of pigments

Zeeospheres Ceramics

Zeeospheres Ceramics G-200PC

Zeeospheres Ceramics G-200PC is unique gray-colored, fine particle size, high-strength microspheres. They are opaque to visible light, but transparent to UV light. These products are typically used to reduce VOC levels, increase filler loadings, improve hardness, and add burnish, scrub and abrasion resistance to a variety of coating formulations. Due to their low resin demand, high hardness and inert chemistry, these products have found utility in high solids, water reducible radiation - curbale and high durability coatings, powder coatings, and a wide range of premium performance coatings.

Deuteron

Deuteron ST

Deuteron ST texturing agents can be used in both solvent-based and water-based coating systems. Potential applications include coil-coating systems and coatings for plastic surfaces. Deuteron ST-x can be used to customize the haptical and optical surface properties. They can also be used as a functional additive to reduce the coefficient of sliding friction.Deuteron ST texturing agents are powders. They give coatings a surface texture. The nature and degree of texturing depends on the applied film thickness and the ratio of texturing agent to binder.The texturing agents have different particle size distributions. The coarser grade induces more intense texturing with good maintenance of gloss. The finer grade gives finer texturing. Depending on the specific formulation this can lead to a reduction in the degree of gloss. The coarser fractions are responsible for the texturing, whilst the finer particles can lead to matting. back

IGM Resins

Omnirad MBF

Omnirad MBF is a highly efficient, liquid, Type II photoinitiator used to initiate radical polymerization of unsaturated oligomers e.g. acrylates, after exposure to UV light. It forms free radicals through an intramolecular hydrogen abstraction process. The use of amines is not recommended as this may lead to efficiency decrease, stability upon storage issues or stronger odor. It can be used in combination with mono or multi functional monomers as reactive diluents

Munzing

CERETAN® MC 6015

CERETAN® MC 6015 is a spherical, micronized Carnauba wax (type 1). This product have application in: 1) Paints and coatings e.g. powder-, can-, car-, industrial-, building-, furniture- and floor coatings, UV systems 2) Printing inks e.g. overprint-, screen-, flexo-, offset- and intaglio inks. CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Rad Solutions

Elite UVP6150

Elite UVP6150 is a flexible hybrid ester acrylate and BPA free.

Rad Solutions

Elite UVP6300-DP20

Elite UVP6300-DP20 is a flexible hybrid ester acrylate which is BPA-free and contains 20% DPGDA.

Tianjin Jiuri Chemical

JRCure 1108

JRCure-1108 is yellow crystal in appearance.

Pan Technology Inc.

PanTINT® 5Y1428

Solvent-free colorants designed for use in powder coatings and UV and EB cured applications. They are based on a proprietary dispersing vehicle which provides exceptional compatibility, light fastness and heat resistance. Available in a wide range of colors for most tinting and masstone applications, our unique manufacturing process insures that the pigments have been dispersed to an exceptionally fine particle size for optimum color strength and transparency. These dispersions are granulated for ease of handling and incorporation with minimal dusting, remain stable under normal ambient conditions and will not sinter or deteriorate with aging.

Mason Color Works

Mason Color Works Chromium Green-Black Hematite - 7217 Green 17

Mason Color Works Chromium Green-Black Hematite - 7217 Green 17 is a high-performance chromium oxide – black hematite based pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military, aerospace and architectural industries. Mason Color 7217 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

IGM Resins

Esacure KIP 100F

Esacure KIP 100F is a liquid mixture of Esacure KIP 150 (70% ) and Omnirad 1173 (30%) and is particularly recommended for high reactivity, low odor and color stability.

Finma GmbH

Sylysia SY 270 N

Sylysia SY 270 N is a white, free-flowing powders of amorphous, micronized silica. sylysia is characterized by the fine pore network and the narrow, defined particle size distribution. These parameters are precisely adjusted to meet a wide variety of applications.

Tianjin Jiuri Chemical

JRCure 1107

JRCure-1107 is white powder in appearance.

Pan Technology Inc.

PanTINT® 12G1740

Solvent-free chip dispersions for use in solvent borne and radiation cured coatings and inks. PanTINT 12 Colorants are based on a unique modified thermoplastic acrylic resin with exceptionally broad compatibility. Pigments used in the PanTINT 12 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Rad Solutions

Elite UVP6070-IB20

Elite UVP6070-IB20 is a flexible hybrid ester acrylate with 20% IBOA.

Mason Color Works

Mason Color Works Zinc Iron Chromite Brown Spinel - 7153 Brown 33

Mason Color Works Zinc Iron Chromite Brown Spinel - 7153 Brown 33 is a high-performance zinc iron chromite pigment, is designed to provide outstanding heat resistance, chemical stability and outdoor durability. This mixed metal oxide pigment meets the demanding performance requirements of the military,aerospace and architectural industries. Mason Color 7153 is recommended for all coating formulations requiring the ultimate in chemical, heat and UV durability.

Nanox

x-bond® M 9028

x-bond® M 9028 is a methacrylate modified silicon dioxide and zirconia based high solid binder. Exhibits hardness, high abrasion, scratch stability with high chemical resistance (solvents, acids and bases). The coatings can be cross-linked by UV or electron beam curing. Thermal curing is also possible. It is a transparent or translucent inorganic-organic high solid binder. Suitable to formulate spraying, dipping and brushing paints and coatings for coil applications. Recommended for use in varnishes also.

Kromachem

Kromachem RAD-COLOR UV-L3

Kromachem Rad-Color UV-L3 is a range of high pigment loading, pre-dispersed and stabilized pigment preparations designed for producing UV flexo inks, UV screen inks and UV coatings.

Lawter

ULTRAFINE™ 1W-LS A

Ultrafine™ 1WLS A is a premium polytetrafluoroethylene fine powder used to improve surface properties of printing inks and coatings. Ultrafine 1WLS A is designed for lubricity, abrasion and heat resistance and may be used in combination with other waxes for the most effective balance of cost and performance. Ultrafine 1WLS A is characterized by a slightly broader particle size distribution. Recommended usage level is 1 to 4%.

AFCONA Additives

Afcona 2502

Defoamer for water-based applications, which undergo during preparation high shear forces, like: pigment pastes and other high filled or high solid systems

Deuteron

Deuteron UV 1242

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

Synthesia

Versal® YELLOW 8GN

Versal® YELLOW 8GN is Disazocond pigment. Used in flexografic, gravure, offset, letter inks and water based paints.

IGM Resins

Photomer 6631

Photomer® 6631 is a hexa-functional aliphatic urethane acrylate for use in UV curable adhesives, inks and coatings. It exhibit of good scratch and abrasion resistance in combination with high reactivity.

Synthesia

Versal® RED HF3S

Versal® Red HF3S is a monoazo grade. It is an organic pigment. Exhibits solvent fastness, reagent fastness, light fastness, weather fastness, overspray fastness, migration fastness and heat resistance. Suitable for offset printing inks and decorative paint. Recommended for UV-cured printing inks, nitrocellulose printing inks, water-based printing inks and decorative laminates printing inks.

Lawter

ULTRAPOLY™ 213A

Ultrapoly™ 213 A is a fine particle size blend polyethylene/PTFE dispersed in a 100% non-volatile, hard-drying binder. Ultrapoly 213 A is recommended for both sheetfed and heatset inks where gloss retention, lubricity, abrasion and mar resistance are required. Ultrapoly 213 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 213 A to 1 part Fluoron™ 960 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Shanghai Tiansheng Chemical

TIANSORB 410

Tiansorb 410 is a liquid hydroxyphenyl-triazine (HPT) UV absorber which provides excellent performance in coatings due to very high thermal stability and performance for coatings exposed to high bake cycles and/or extreme environmental conditions, hydroxy functionality to minimize migration, high photostability for long life performance, high concentration for maximum efficiency. Tiansorb 410 is designed to fulfill the high performance and durability needs of automotive and industrial finishes. Its low color and stability make it an excellent choice for all coatings where low color characteristics are ideal for use.

SiliXan

SiliXan® M 500

SiliXan® M 500 is polymer based on silicon with unsaturated methacrylic groups used as unsaturated polymer for the formulation as a co-binder or as an additive to conventional acrylate or methacrylate based of varnishes, paints or coatings. The product improves the chemical resistance and increases the adhesion to glass or metals in UV-curing formulations. A thermal or peroxide curing is also possible.

Spectra Group Limited

Spectra Group Limited H-Nu 640

Spectra Group Limited H-Nu 640 can cure a wide range of acrylate resins via free-radical mechanism. It is a commercial photoinitiator with a broad absorbance range of 570 nm to 670 nm (λmax = 649nm in DMSO).

IGM Resins

Photomer 5434

PHOTOMER® 5434 is a low viscosity tetra-functional polyester acrylate oligomer, which exhibits excellent flexibility and reactivity in radiation curable formulations.