Paints & Coatings

allnex

ADDITOL® XL 255 N

Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.

allnex

MODAFLOW® 9200

Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.

Sasol

DISPAL 28AC2

DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.

allnex

MODAFLOW® RESIN

MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.

Clariant

Genapol® ED 3060

Genapol® ED 3060 is a nonionic wetting agent for use as compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage supply form is 0.5-1.5% in emulsion paints and 1.0-1.5% in acrylic lacquers, and 0.5-1.5% in alkyd lacquers.

Chromaflo Technologies

CHROMA-CHEM® 844-9957

Chroma-Chem® 844-9957 colorants are designed specifically for use in high-performance, non-aqueous, industrial coatings. The various pigments in this colorant line are dispersed in a proprietary acrylic resin vehicle. This vehicle provides excellent wetting and dispersing properties superior to other acrylic resins. The solvents used are a blend of Propylene Glycol Monomethyl Ether Acetate (PMA) and Naphthol Spirits. They are non-Red label and conform to Rule 66 and similar regulations. Each colorant contains a carefully selected and unique blend of vehicle, solvent, pigment and surfactants to yield acceptance in a wide range of non-aqueous coatings applications. The individual Chroma-Chem® 844 colorant formulations are designed to minimize the surfactant and additive levels needed to achieve colorant acceptance in a variety of coatings systems. A recent effort has been made to remove APEO additives from the 844 colorants. The back of the product sheets shows information about each colorant in the line, including whether the colorant is formulated with APEO additives.

allnex

SETALUX® 1385 BX-51

SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

allnex

CYMEL® 325 Resin

CYMEL® 325 resin is a methylated high imino melamine crosslinker supplied in iso-butanol. It is highly reactive and has a high tendency towards self-condensation providing films with very good hardness, gloss, chemical resistance and outdoor durability. It is suitable for a wide range of solventborne or waterborne baking applications, such as coil and can coating formulations, automotive primers and topcoats, and general industrial coatings.

allnex

SETALUX® 1184 SS-51

SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

Munzing

CERETAN® MPS 3120

CERETAN® MPS 3120 is a micronized polypropylene wax, coated with Silica.excellent matting effect high transparency excellent slip excellent scratch resistance good heat resistance. Application in paints and coatings, such as industrial paints, wood coatings, overprint varnishes and UV-coating systems.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Momentive Performance Materials

CoatOSil™ 3501

CoatOSil™ 3501 coatings additive is the Momentive Performance Materials most powerful friction reducing agent, providing the maximum in coefficient of friction (COF) reduction for radiation-cured formulations in its portfolio of coatings additives. And this additive isn’t one-dimensional; it also functions as an extremely effective defoamer, especially in aqueous systems. And it enhances slip and mar resistance in waterborne, water-reducible and conventional and high-solids solvent systems.

allnex

CYCAT® 6925

CYCAT 6925 catalyst is amine-neutralized dodecylbenzene sulfonic acid. It is compliant with FDA 21 CFR Section 175.300 concerning chemicals for use in resinous and polymeric coatings.

allnex

SETALUX® 1152 SS-60

SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.

allnex

SETALUX® D A 450 BA/X

SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.

allnex

ADDITOL® XL 6577

ADDITOL® XL 6577 is a low molecular weight additive, which is especially able to deflocculate and stabilize inorganic pigments very actively by electrical charging at the pigment surface and permits very low viscosity millbase formulations. It can be used as a wetting and dispersing agent for solvent-containing systems.

allnex

BECKOCOAT® PU 428/51XMPAC

BECKOCOAT® PU 428/51XMPAC is a light stabilized, oil-free, moisture curing one-component polyurethane resin. It's used in floor sealers, wood coating, concrete impregnation, and as crosslinkers for alkyd resins in two-component systems.

Chromaflo Technologies

CHROMA-CHEM® 754-7070

Chroma-Chem® 754-7070 color packs for epoxy coatings consist of a blend of various organic and inorganic pigments milled in a solvent-free liquid epoxy. These color packs use an additive package and a small amount of diluent to provide excellent handling for in-plant or job-site tinting. These color packs are designed as a single-color package that can be mixed into a clear base to produce 24 colors that are typically found in the palette for concrete protective coatings applications. Each color comes pre-blended to match various shades of gray, as well as tan, blue, green, and Red. A Safety Yellow and Safety Red are also included in the color palette.

allnex

SETALUX® 1753 SS-70

SETALUX® 1753 SS-70 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). Fast drying, high build and gloss, excellent mechanical properties and chemical resistance, practically no yellowing under UV-light, high solids content at application viscosity.

Chromaflo Technologies

Solvasperse™ AK AWH1

Solvasperse™ AK AWH1 is solvent-based and Reduced VOC, specially developed for in-plant tinting. The range of Solvasperse AK colorants provide excellent compatability, consistent performance and minimal effect on paint properties. Developed for medium-oil architectural alkyd paints, these colorants are formulated with alkyd resin and aromatic-free solvents. The Solvasperse AK colorants have a Reduced VOC content of <300 g/l and newly approved anti-skinning agent. This guarantees compliance with the current EU directive, provided that the paint itself meets the requirements. Two transparent iron oxide colorant options are available for wood finishing applications. Because of their transparent nature, the wood structure remains visible. At the same time, the colorant does not affect important physical properties of the paint, such as weather resistance and UV barriers.

Reichhold

BECKOSOL® 12-901

BECKOSOL® 12-901 is an alkyd resin, soyabean oil chain-stopped, in xylol

Chromaflo Technologies

CHROMA-CHEM® 844-0451

Chroma-Chem® 844-0451 colorants are designed specifically for use in high-performance, non-aqueous, industrial coatings. The various pigments in this colorant line are dispersed in a proprietary acrylic resin vehicle. This vehicle provides excellent wetting and dispersing properties superior to other acrylic resins. The solvents used are a blend of Propylene Glycol Monomethyl Ether Acetate (PMA) and Naphthol Spirits. They are non-Red label and conform to Rule 66 and similar regulations. Each colorant contains a carefully selected and unique blend of vehicle, solvent, pigment and surfactants to yield acceptance in a wide range of non-aqueous coatings applications. The individual Chroma-Chem® 844 colorant formulations are designed to minimize the surfactant and additive levels needed to achieve colorant acceptance in a variety of coatings systems. A recent effort has been made to remove APEO additives from the 844 colorants. The back of the product sheets shows information about each colorant in the line, including whether the colorant is formulated with APEO additives.

Tronox

TiONA® 595

TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.

Clariant

Dispersogen® LFH

Dispersogen® LFH is an anionic, surfactant-based dispersing agent for water-based pigment preparations, suitable for inorganic and organic pigments and carbon blacks. Dispersogen® LFH is recommended for use in point-of-sales colorants and concentrates for in-plant tinting, in combination with a nonionic dispersing agent such as Dispersogen® MT 200. The general dosage recommendation is 4-20% on organic pigments and 1-6% on inorganic pigments.

Clariant

Dispersogen® PL 30

Dispersogen® PL 30 is a nonionic, polymeric dispersing agent for water-based pigment preparations, suitable for organic pigments and specialty carbon blacks. The product is recommended for use in concentrates for in-plant tinting. The general dosage recommendation is 10 - 40% on organic pigments. Dispersogen® PL 30 also acts as wetting agent/compatibilzer in waterborne high PVC paints as well as in waterborne and solvent-borne low PVC lacquers. The general dosage is 0.5-1.0% in emulsion paints, 1.0-1.5% in acrylic lacquers and 0.25-0.5% in alkyd lacquers.

allnex

BECKOPOX™ EP 384W/53WAMP

BECKOPOX™ EP 309/50MPAC is a solid, high-molecular unmodified epoxy resin mainly used in combination with phenolic resins for stoving systems, e.g. Can coatings. Combinations yield high-deformable coatings with excellent resistance against chemicals and foodstuff.

allnex

ACURE™ 510-170

ACURE™ 510-170 is an extremely fast drying topcoat for use in Marine and Protective and various premium, non-isocyanate topcoat systems. ACURE™ topcoats feature excellent hardness development coupled with excellent outdoor durability, high cross-link densities, and outstanding chemical resistance. ACURE™ paints exhibit long pot lives and tuneable open times. The succinimide in ACURE™ 510-170 is compositionally the same as ACURE™ 510-100. As succinimide is quite difficult to dissolve, ACURE™ 510-170 provides a production-friendly manner of incorporation of succinimide into ACURE™ paints.

KaMin LLC

KaMin® 70C

High brightness, work-horse calcined kaolin clay, extremely low crystalline silica content.

Chemical Partners Industry

Chempart® SC-100

Chempart® SC-100 is Polysaccharide Resin that uniquely processed film forming resin. It is a coactive resin which will form a hydrogen bond with alkyd and stabilize water molecules with the enamel coating. Surrounds the dispersed water droplets impeding their attraction with each other, promoting steric stabilization of the water-in-oil emulsion. During water evaporation (Chempart SC100) prevents voids and pinholes from forming in the film, and works to maintain the film's durability and performance.

Polynt Group

Rezimac® 62-6260

Rezimac® 62-6260 is a silicone modified, soya-based alkyd exhibiting excellent color and gloss retention that lengthens time to repaint. Enamels formulated with this resin meet the requirements of specifications TT-E-490E and TT-E-1593B. Manufactured in North America. All components of this product are listed on the DSL.

Lapinus Fibres

Lapinus Fibres CF30

Lapinus Fibres CF30 is grey, medium long engineered mineral fiber for coating applications.

Tronox

TiONA® 128

TiONA® 128 is a multi-purpose, blue tint tone, chloride-process rutile titanium dioxide pigment, designed to give an outstanding combination of ease of dispersion, excellent optical properties and good durability in a wide range of coating applications.

Munzing

CERETAN® ME 0825 WD

CERETAN® ME 0825 WD is a spherical, micronized, surface-modified Polyethylene wax and have uses in Paints and coatings and Printing Inks. This product have very good scratch- and abrasion resistance properties.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

allnex

SETALUX® 1756 VV-65

SETALUX® 1756 VV-65 is a A thermosetting hydroxylated acrylic copolymer for combination with amino resins High solids content at spraying viscosity, good durability and gloss.

Clariant

Genagen® COA

Genagen® COA is a non-VOC coalescing agent for decorative coatings.Many additives contain volatile organic compounds VOC that evaporate and degrade the environment, which are harmful for humans. Genagen COA complements paint formulator’s attempts to replace VOC-containing coalescing agents, and effectively reduces minimal film formation temperature MFFT of paint binders based on styrene/acrylic monomers, pure acrylic emulsion polymers and vinyl acetate polymers. It strongly supports the film formation at lower temperatures with little impact on the paint viscosity and binders. Genagen® COA can be added to the binder and the paint and is recommended to be used in low PVC paints like facades paints, wood coatings and lacquers. Dosage: 1 – 4%product on polymer binder.

Clariant

Emulsogen® TS 200

Emulsogen® TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage supply form is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers.The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen® TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen® TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.

allnex

ADDITOL® DRY CF100

ADDITOL® dry CF100 is a ready to use, universal Cobalt replacement drier designed to have excellent compatibility and fast incorporation in all solvent borne and waterborne alkyd paints. It is based on twin accelerated Manganese.