Paints & Coatings
1,084 products found in Paints & Coatings
EZ-Blox® optimizes the performance of alkyd-based paint and coating systems by preventing surface skin formation caused by contact with atmospheric oxygen. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, with equivalent efficacy and compatibility. With REACH-certification and a distinct, low-toxicity profile, EZ-Blox® is ideal for paint and coatings producers looking to reformulate high-performance alkyd-based systems ahead of the ECHA's March 1, 2022 reclassification and labeling requirements.
ADDITOL® XL 255 N
Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.
SETALUX® 1385 BX-51
SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.
When your application calls for a general purpose hardener at low temperatures, Amirez 148/024 exceeds all performance expectations, meeting every specification requirement with speed and a greater degree of technical excellence. This low viscosity, fast cure waterborne reactive polyamide adduct has all application angles covered, from floor and wall painting to hygiene coatings.
SETALUX® 1184 SS-51
SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.
SETALUX® 1152 SS-60
SETALUX® 1152 SS-60 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). SETALUX® 1152 SS-60 is easy in application, even under conditions of high humidity and low temperatures. SETALUX® 1152 SS-60 is capable of high build with practically no yellowing under UV light, has excellent exterior durability, good mechanical properties and chemical resistance.
SETALUX® D A 450 BA/X
SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.
Chroma-Chem® 754-7070 color packs for epoxy coatings consist of a blend of various organic and inorganic pigments milled in a solvent-free liquid epoxy. These color packs use an additive package and a small amount of diluent to provide excellent handling for in-plant or job-site tinting. These color packs are designed as a single-color package that can be mixed into a clear base to produce 24 colors that are typically found in the palette for concrete protective coatings applications. Each color comes pre-blended to match various shades of gray, as well as tan, blue, green, and Red. A Safety Yellow and Safety Red are also included in the color palette.
AdvanSix Methyl Ethyl Ketoxime (MEKO)
Methyl ethyl ketoxime (MEKO) is a high-efficiency anti-skinning agent used for air-drying paints, inks and coatings. It can also be used to improve the shelf life of silicone adhesives and sealants and the functionality of polyurethane coatings. MEKO meets the most stringent standards for low moisture and high assay. As a safe, cost-effective alternative to MEKO, AdvanSix also offers EZ-Blox®, which provides low risk of exposure and an improved toxicology profile. EZ-Blox® does not require costly reformulation or additional research and development, and independent research shows it is safe as a versatile intermediate for use in Adhesives & Sealants, Automotive & Transportation, Building & Construction, Industrial, Packaging, and Paints & Coatings applications.Adhesive & Sealants Construction adhesives and tapes, labels, and graphic art adhesives. Automotive & Transportation Exterior and body parts, bonding and assembly sealants.Building & Construction Building envelope materials, glazing and window elements, construction sealants and caulks, and other infrastructure applications. IndustrialWater treatment applications.PackagingPackaging primer and lacquer coating applications.Paints & CoatingsCoatings for automotive OEM, commercial vehicles, vehicle refinish, off road, agricultural and construction equipment, rail, mass transit, coil, and metal, as well as architectural coatings, decorative paints and coatings, roof coatings, and concrete coatings.
SETALUX® 1753 SS-70
SETALUX® 1753 SS-70 is an acrylic polyol with 4.2 % OH (calculated on non-volatiles). Fast drying, high build and gloss, excellent mechanical properties and chemical resistance, practically no yellowing under UV-light, high solids content at application viscosity.
Tolonate™ X FLO 100
Tolonate™ X FLO 100 is a partially bio-based, solvent free and low viscosity aliphatic isocyanate polymer.
Tolonate™ HDT 90
Tolonate™ HDT 90 is an aliphatic polyisocyanate, based on HDI-trimer (isocyanurate), supplied at 90% solids in a blend of butyl-acetate/high flash aromatic solvent (1 for 1 by weight). It shows an ideal balance between high functionality and low viscosity.
TiONA® 595 is a multipurpose chloride-process rutile titanium dioxide pigment designed to give an outstanding combination of dispersion, opacity, gloss and durability in a wide range of coating applications.
Amirez 148/055, the perfect cure for formulation challenges. Even better when you discover it's been developed to address high gloss with fast cure, no blushing and water resistance. It creates floor coatings with unrivalled performance characteristics, such as excellent hardness, superb water and chemical resistance. It seals and protects to give high gloss and aesthetically pleasing, durable floors.
Emulsogen® TS 200
Emulsogen® TS 200 is a nonionic wetting agent for use as a compatibilizer in waterborne high PVC paints, as well as in waterborne and solvent-borne low PVC lacquers. The general dosage supply form is 1.0-1.5% in emulsion paints and in acrylic lacquers, and 0.25% in alkyd lacquers.The additive can also be used as a dispersing agent in water-based pigment preparations, suitable for organic pigments and carbon blacks. Emulsogen® TS 200 is recommended for POS-colorants as well as for concentrates for in-plant tinting. The general dosage recommendation is 5-30% on organic pigments and 20-40% on carbon black.Furthermore, Emulsogen® TS 200 acts as a nonionic emulsifier for the emulsion polymerization of monomers like acrylates, styrene-acrylates, and vinyl acetate.
SETALUX® 1756 VV-65
SETALUX® 1756 VV-65 is a A thermosetting hydroxylated acrylic copolymer for combination with amino resins High solids content at spraying viscosity, good durability and gloss.
D.E.R.354 Liquid Epoxy Resin is a standard liquid epoxy resin based on the reaction products of bisphenol F and epichlorohydrin. D.E.R. 354 Liquid Epoxy Resin is an unmodified bisphenol F based liquid, low viscosity epoxy resin. It is compatible with common epoxy resins and can be blended with them in any ratio. It achieves a high degree of cure at ambient temperatures, providing improved resistance performance against solvents compared to standard bisphenol A liquid epoxy resins. D.E.R. 354 Epoxy Resin may be used alone but is more frequently used in combination with standard bisphenol A liquid epoxy resins such as D.E.R. 330 Resin or D.E.R.TM 331TM Resin. By using suitable combinations of bisphenol A and bisphenol F epoxy resins, not only is the viscosity reduced but the tendency to crystallize is almost eliminated. See the Dow technical bulletin, Crystallization of Liquid Epoxy Resins, Form No. 296-01652. A wide variety of curing agents is available to cure this resin at ambient conditions. Most frequently used are aliphatic polyamines, polyamides and modified versions of these. If anhydride or catalytic curing agents are employed, elevated temperature and long-post cures are required to develop full end properties.
Tolonate™ HDT is a medium viscosity, solvent-free aliphatic polyisocyanate, used to produce 2K polyurethane coatings with superior performances.
Chroma-Chem® DH-02876 plasticizer-based dispersions consist of organic and inorganic pigments suspended in a phthalate-free plasticizer. The primary plasticizer is 1,2-cyclohexanedicarboxylic acid diisononyl ester. At Chromaflo, we give special consideration to pigment types in the custom color matching process. Pigments may be selected according to a variety of criteria, including weathering, UV stability, food contact, non-heavy metals, low abrasion and cost considerations. Along with these standard colors, Chromaflo Technologies offers custom color matched blends using the masstones in this line. These blended colors, or color packs, can be matched to almost any color.
SETALUX® D A 365 BA/X
SETALUX® D A 365 BA/X is an acrylic polyol with 4.5 % OH (calculated on non-volatiles). High hardness and thoughness with good flexibility, high gloss and body, excellent weather stability and lightfastness, good resistance to solvents and petrol.
ADDITOL® XL 270
Additol® XL 270 is a non-ionic wetting and antisettling agent. It is usually compatible with solvent-based and solvent-free binders, and prevents the sedimentation of pigments in paints.
SETALUX® 81198 SS-55 YA
An acrylic polyol with 4.0 % OH (calculated on non-volatiles), modified with sag control agent (SCA). High build and gloss, high sagging limit, fast drying, excellent mechanical properties, excellent chemical resistance, good clarity after drying at room temperature, high end hardness and good adhesion results on metallic base coats.
SETALUX® 1179 BA-57
SETALUX® 1179 BA-57 is an acrylic polyol with 1.7 % OH (calculated on non-volatiles) which is fast drying. SETALUX® 1179 BA-57 has good compatibility with CAB and good alcohol resistance.
Tolonate™ FD 90 B
Tolonate™ FD 90 B is a high functionality, fast drying aliphatic polyisocyanate based on HDI-trimer, supplied at 90% solids in butyl acetate.
SCHWEGO® mar 8304
Slip additive for solvent-borne coating systems. SCHWEGO mar 8304 is suitable for solvent-based systems as: air drying alkyds, alkyd/melamine combinations, self crosslinking and co-reacting polyacrylates, polyurethanes, nitrocellulose, acid curing melamine and urea systems, oil-free polyesters.
Tolonate™ HDB is a viscous solvent-free aliphatic polyisocyanate, used to produce high performance 2K polyurethane coatings.
D.E.R.TM 337-X90 Epoxy Resin is a semi-solid reaction product of epichlorohydrin and bisphenol A dissolved in xylene. D.E.R. 337-X90 Epoxy Resin is a solution of D.E.R. 337 Epoxy Resin in xylene solvent at a 90 wt% solids content. D.E.R. 337-X90 Epoxy Resin Solution is mainly used in adhesives and protective coatings, or as a modifier for other epoxy resins to improve impact strength, extensibility and adhesion. The excellent resistance and physical properties have established D.E.R. 337-X90 Epoxy Resin as a major raw material for epoxy coal tar combinations and higher solids content marine coatings. D.E.R. 337-X90 Resin can be used to modify the performance or handling of liquid epoxy resin such as D.E.R.TM 331Liquid Epoxy Resin, or epoxy novolac resins
Chroma-Chem® DH-02443 plasticizer-based dispersions consist of organic and inorganic pigments suspended in a phthalate-free plasticizer. The primary plasticizer is 1,2-cyclohexanedicarboxylic acid diisononyl ester. At Chromaflo, we give special consideration to pigment types in the custom color matching process. Pigments may be selected according to a variety of criteria, including weathering, UV stability, food contact, non-heavy metals, low abrasion and cost considerations. Along with these standard colors, Chromaflo Technologies offers custom color matched blends using the masstones in this line. These blended colors, or color packs, can be matched to almost any color.
Jubail Chemical Industries
Razeen® LR 1150
Razeen® LR 1150 is a general purpose unmodified medium viscosity epoxy resin based on Bisphenol A. Razeen® LR 1150 yields excellent mechanical properties and resistance to chemicals, which can be modified within wide limits by using various hardeners and fillers. Razeen® LR 1150 is meets the relevant requirements of the FDA listing.
Borchi® Gol 0011
Modified polysiloxane flow and air release agent for solvent-based and solvent-free coatings systems, 100 % active.
SETALUX® D A 960 SN
SETALUX® D A 960 SN is an acrylic polyol with 1.3 % OH (calculated on non-volatiles). Good lightfastness and chalking resistance, good single-coat adhesion on steel and most non-ferrous metals.
SETALUX® D A 160 X
SETALUX® D A 160 X is an acrylic polyol with 2.7 % OH (calculated on non-volaties) which is used in combination with aliphatic polyisocyanates based on hexamethylene diisocyanate to formulate air drying curing and forced drying coatings with good weather stability and good resistance to water, washing solutions andchemicals.
SETALUX® D A XP 2588
SETALUX® D A XP 2588 is a hydroxyl-functional acrylic polyol that is a co-reactant with hexamethylene diisocyanate based polyisocyanates to formulate air-and force-dry two-component polyurethane coatings with good light stability, chalking resistance and gloss retention. The cured paint films are hard, tough but flexible, glossy and high-bodied with good resistance to solvents and gasoline.
BECKOPOX™ EP 116
BECKOPOX™ EP 116 is a non-crystallizing liquid resin for coatings with high chemical-resistance, adhesives, trowelling, casting and laminating compounds.
SETALUX® 1274 BA-70
SETALUX® 1274 BA-70 is an acrylic polyol with 4.2% OH (calculated on non-volatiles). Co-reactant mainly for Desmodur® N to formulate two-component polyurethane coatings with good light stability, chalking resistance and gloss retention; particularly suitable for automobile coatings. The cured paint films are hard, tough but flexible, glossy and high-bodied with excellent weather stability and light-fastness and good resistance to solvents and petrol.
SETALUX 27-1592 is a ROBUST hydroxyl-functional acrylic oligomer for 2K high solids industrial air dry, force dry and bake applications. Coatings formulated with SETALUX 27-1592 exhibit excellent overall performance properties. Key properties include high solids, low VOC formulation potential, excellent flow and leveling, good flexibility and early water resistance. SETALUX 27-1592 is the FAST CURE version of SETALUX 27-1551.