Paints & Coatings

allnex

MODAFLOW® 2100

Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.

allnex

MODAFLOW® 9200

Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.

allnex

MODAFLOW® RESIN

MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.

allnex

EBECRYL® 303

EBECRYL 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT ALK 300

DISACOAT ALK 300 is a neutralizing agent for paints, co-dispersant auxiliary – it reduces the dispersant demand and substitute of the ammonium hydroxide in paints of low scent.

allnex

EBECRYL® 168

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations.

allnex

EBECRYL® 350

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings.

allnex

EBECRYL® 7100

EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. Benzophenone), EBECRYL 7100 has an accelerating effect on the UV cure speed. EBECRYL 7100 also promotes adhesion to plastic substrates such as polyester, ABS, polycarbonate and polypropylene oxide. It is recommended for use in: adhesives and coatings for plastics, clear coatings for paper, screen ink vehicles, metal decorating inks and coatings, wood fillers and coatings, lowering viscosities of other resin systems, and accelerating UV cure response.

allnex

EBECRYL® 160

EBECRYL® 160 is a reactive diluent commonly used in ultraviolet light (UV) and electron beam (EB) energy curable coatings and inks. It can be used to impart crosslinking to energy curable coatings and inks while maintaining a degree of flexibility and toughness. Of the common triacrylate diluents used in energy curable formulations, EBECRYL® 160 exhibits the highest reactivity and the greatest viscosity reduction of oligomers. EBECRYL® 160 is a reactive diluent compatible with a wide range of acrylated resins used in UV/EB curing applications. Hardness, abrasion resistance, and high gloss properties make EBECRYL®160 popular for overprint varnishes, inks, coatings and electronic applications such as photoresists.

allnex

EBECRYL® P115

EBECRYL® P115 is a copolymerizable amine used as a hydrogen donor, or photoactivator, in ultraviolet light (UV) curable coatings and inks. When used in formulations in combination with a photosensitizer (e.g. ADDITOL® BP), EBECRYL® P115 provides rapid UV cure response in air by mitigating the effects of oxygen inhibition at the coating or ink surface. It has recommended levels are from 5 to 15% based on the total formulation, usually combined with 3-5% photosensitizer.

allnex

EBECRYL® 870

EBECRYL® 870 is a fatty acid modified polyester hexaacrylate. Because of the special structure of the backbone and the high acrylic functionality, EBECRYL® 870 provides the proper hydrophilic-lipophilic balance necessary for lithography, and high reactivity when cured by ultraviolet light (UV) or an electron beam (EB). It is recommended for: fast curing lithographic inks and clear varnishes, and improving lithographic behavior as an additive.

MPC-PROKIM Chemicals

MPC-PROKIM Chemicals AGSL70

MPC-PROKIM Chemicals AGSL70 is an air drying long oil alkyd resin based on soya bean fatty acid. It provides a very clear varnish. It presents a good gloss retention, a good durability, a good color stability, a good wettability, a good high-build, a sufficient spread, a good brushability as well as a good yellowing and aging resistance.

TBF Environmental Technology Inc.

KradaSol™

KradaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Hexane, Xylene, Cyclohexane, Toluene and Perchloroethylene.

Scott Bader

Crestakyd® 10-1066

Crestakyd® 10-1066 is a fast drying alkyd that has excellent brushability and flow characteristics, as well as good gloss retention and weathering resistance. This long oil air drying alkyd can be used for economical decorative and do-it-yourself paints, including primers, topcoats, and varnishes.

allnex

MODAFLOW® AQ 3025

Modaflow® AQ 3025 is an acrylic flow additive for aqueous coatings, without silicone addition. It has been developed for use in water-reducible, latex, and dispersion systems and is compatible with a broad range of chemistries.

Bomar Specialties LLC

Bomar Oligomers® BDT-1006

Bomar™ BDT-1006 is a dendritic acrylate with an average functionality of 6. The hyper-branched structure of BDT-1006 imparts the unique combination of low diluted viscosity withunmatched chemical and thermal resistance, which is ideal in applications where withstanding exposure to the harshest conditions is paramount.Great for high-temperature applications because thermogravimetric analysis indicates the oligomer doesn’t decompose until 390 °C.

allnex

EBECRYL® 113

EBECRYL® 113 is a low odor monofunctional acrylated aliphatic epoxy that can be used as a reactive diluent in ultraviolet light (UV) or electron beam (EB) curing formulations. It is a good diluent for a variety of acrylated oligomers. In formulations, it can lower Tg, increase flexibility and improve adhesion to plastics. It is recommended as a reactive diluent for: screen inks and varnishes, coatings for paper and plastic, water resistant coatings, flexible coatings, coatings and inks with adhesion to plastics such as polyethylene and plasticized PVC, and wood sealers and topcoats.

Shamrock Technologies Inc.

AquaFLON® 50-RC

AquaFLON® 50-RC is an aqueous dispersion of submicron polytetrafluoroethylene (PTFE) and is produced to be in compliance with REACH regulatory requirements. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

Huber Engineered Materials

Pergopak® M4

Pergopak® M4 is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention.

Disamtex Ind, e Com. de Produtos Quimicos

DISAFOAM 750

DISAFOAM 750 is a high performance antifoam with excellent cost-benefit. product with 100% active material and silicone free.

Huber Engineered Materials

Pergopak® M6

Pergopak® M6 is used as a matting and effects agent for the coatings industry imparting high matting efficiency, low impact on rheology, improved scratch and abrasion resistance, improvement of adhesion and elasticity, excellent weather resistance and gloss retention.

Polyols and Polymers

POLYTONE® K94

POLYTONE™ K-94 is practically acidless, unsaponifiable Ketone Formaldehyde Resin which is very light in color, has excellent light resistance and show but very slight tendency to solvent retention. Addition of this resin in general improves gloss, hardness, filling, adhesive strength and durability

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT DS 1515

DISACOAT DS 1515 is a high performance multifunctional dispersant for systems based solvent.

FedChem

Manalox™ 300

Manalox™ 300 is a bis alkoxylated aluminum chelate complex solution in ink oil solvent with a very wide effective temperature range (100 - 180 °C). Manalox 300 can be added to most varnishes at cooking temperatures without the need for much, if any, pre-dilution. Manalox 300 does not produce any byproduct alcohols during the gelling reaction.

allnex

EBECRYL® 230

EBECRYL® 230 is an aliphatic urethane diacrylate characterized by its light color and low viscosity. Films cured via exposure to ultraviolet light (UV) or electron beam (EB) are soft and flexible, and are resistant to yellowing.

allnex

EBECRYL® 145

EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for developing low viscosity and low volatility coatings and inks. It is recommended for use in clear & pigmented coatings, over print varnishes, flexo and inkjet inks, and pressure sensitive adhesives.

Polygroup

FloorGrain™ Medium SHP4080-1

FloorGrain™ Medium SHP4080-1 is a thermoplastic high molecular weight polymer in fine particle powder form. These unique materials exhibit very high toughness. FloorGrain™ powders are well suited for use in structural paints and coating applications that require anti- slip characteristic, structural performance, or satin and matt finish effects.

allnex

EBECRYL® 5850

EBECRYL® 5850 is a high performing medium viscosity bio-based diacrylate. When properly formulated, coatings and inks based on EBECRYL®5850 cured by ultraviolet light (UV) or electron beam (EB) energy display high reactivity with good hardness and scratch resistance.

allnex

EBECRYL® 245

EBECRYL® 245 is an aliphatic urethane diacrylate oligomer diluted with 25% of tripropylene glycol diacrylate. Films of EBECRYL® 245 cured by UV or EB exhibit good flexibility and non-yellowing properties typical of an aliphatic urethane. It is recommended for use in: flexible screen inks and coatings, and coatings on PVC, linoleum and flexible plastics.

allnex

EBECRYL® 3701

EBECRYL® 3701 is a modified bisphenol A epoxy diacrylate. It imparts flexibility and toughness to ultraviolet light (UV) or electron beam (EB) cured coatings and inks while maintaining such desirable properties as fast cure response and superior chemical resistance that are typical of standard epoxy acrylates. It is recommended for use in: clear coatings for paper, wood, and rigid plastic, adhesives for paper and film lamination, and lithographic, screen and flexographic ink vehicles.

Shamrock Technologies Inc.

AquaFLON® 50

AquaFLON® 50 is an aqueous dispersion containing submicron PTFE. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. These additives are used to provide slip and abrasion resistance.

Huber Engineered Materials

Spacerite® S-11 Alumina Trihydrate (ATH)

SpaceRite S-11 is a fine crystalline, aluminum trihydroxide with uniform particles averaging 1/4 micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particlesize distributions. SpaceRite S-11 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.

Microfill K. Zafranas

Zetatalc EW 10

Zetatalc EW 10 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 10 renders these unique properties it possesses wherever it is applied

Chemiewerk Bad Kostritz

Köstrosol® 730

Köstrosol® 730 is a weak opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This small-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 0730 is a pure colloidal silica without any organic additives.

Serkim

SERKYD S40TX65

Serkyd S40TX65 is a soybean oil based, short oil alkyd resin used in stoving primer systems and top coat paints, wood varnishes, cellulosic applications.

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT RF

DISACOAT RF is a rust converter for paints and primers water based.