products in Paints & Coatings: Varnishes

Eduard Merkle

Ulmer Weiss WL

Ulmer Weiss WL is a fine calcium carbonate powder with a yellow index of 5.2 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss WL is a solid powder in appearance with a characteristic odor.

Add-Additives

ADD 3772

ADD-3772 is a silicone-free additive suitable for aqueous and non-aqueous systems. It is designed to reduce the surface tension of various resin systems at substrate interface, which will improve substrate wetting and leveling; and prevent formation of craters without stabilizing foam. ADD-3772 is suitable for coatings and printing inks.

Eduard Merkle

Juraperle 130

Juraperle 130 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 130 is a solid powder in appearance with a characteristic odor and oil absorption of 10 g/100g.

PCC Chemax

SULFOROKAnol L270/1A (Sodium Laureth Sulfate)

SULFOROKAnol L270/1A (Sodium Laureth Sulfate) is an anionic surfactant from the group of alkyl ether sulfates (INCI name: Sodium Laureth Sulfate). The product is based mainly on raw material of natural origin. It has the consistency of a liquid paste, colorless to light yellow. The product is available in concentrated form as a 70% aqueous solution, which translates into a reduction in transport and storage costs. The product shows complete solubility even in hard water. It does not contain preservatives.

CASAL DE REY

CASAL DE REY COBALT OCTOATE 12%

Casal De Rey Cobalt Octoate 12% is a very active oxidizing agent. Promotes the rapid drying of polyunsaturated oil films and varnishes or resins based on them. Its use is practically unavoidable if you want to obtain short drying times to the touch.

Lawter

TERLON™ 613A

Terlon™ 613 A is a soybean oil alkyd. It can carry and print a higher load of pigment than bodied oils and conventional alkyds. Terlon 613 A shows good color retention characteristics and hence is recommended for use in heat induced drying applications. Terlon 613 A dries by oxidation and forms a flexible film. While drying times are slower than pure linseed oil based alkyds, initial odor and odor development during oxidation are markedly reduced. Terlon 613 A offers a very effective cost/quality ratio.

Munzing

DEE FO® 215

A universal defoamer effective in most adhesive applications including PSA, laminating, packaging, envelope, wood glue, construction and natural/neoprene formulations. DEE FO 215 can be utilized in OPV, emulsion polymers of all chemistries, and high gloss industrial coatings.

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT RF W CONC

DISACOAT RF W CONC is a manufacture of oxide converters liquids, in water-based systems.

IGM Resins

Photomer 4028

Photomer® 4028 exhibits moderately low viscosity, low odor, excellent cure speed and low irritancy. It contributes towards good adhesion, scuff and abrasion resistance properties in UV and EB curable formulations.

TBF Environmental Technology Inc.

ZemaSol™

ZemaSol™ is a VOC-compliant, safe, low toxicity solvent that is an efficient, cost effective alternative to Xylene, Toluene, Parachlorobenzotrifluoride (PCBTF/Oxsol 100®) and Tertiary Butyl Acetate (TBAc).

Polyols and Polymers

POLYTONE® P141

POLYTONE™ P 141 is a high melting modified Phenolic resin suitable for manufacture of offset printing inks where low body is required.

Industrial Summit Technology

SKYBOND® 703

SKYBOND® 703 is a heat reactive aromatic resin which can be thermally cured to a crosslinked polyimide. It is specifically designed for structual, and specialty applications where extended high temperature exposure is required. It represents an excellent balance of processing advantages and high thermal stability .Excellent strength retention is maintained up to temperatures of 650° F.

Eduard Merkle

Juraperle 0,5-1,0

Juraperle 0,5-1,0 is a fine calcium carbonate granulate designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, paperboard, paper, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 0.5-1 is similar to sand or gravel in appearance with a characteristic odor and is not flammable. This product has a grain size of 0.5-1.0.

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT DS E

DISACOAT DS E is a multifunctional dispersant for solvent systems.

Golden Cashew

Golden Cashew Nut Shell Liquid Resin0357

Golden Cashew Nut Shell Liquid Resin0357 is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property.

Oltchim

PETOL® Pa 500-5D

Petol PA 500-5D is a highly reactive aliphatic amine polyether polyol, used in blending with other polyols for the production of rigid polyurethane foams for thermal insulation applied by spraying technique (roofs, floors, ceilings) or by molding technique (refrigerators, freezers, panels). Petol PA 500-5D has an auto-catalytic activity and thus reduces the catalyst requirements. It has a good compatibility with alkanes (n-pentane, cyclopentane) and also with HCFC.

Kemiteks

PIGMARAMA® YELLOW 10G

PIGMARAMA® YELLOW 10G is highly pigmented water-based dispersions stabilized by optimized blend of surfactants. Main uses are for the pigmentation of emulsion paints. Also suitable for tinting acrylate, soap coloration, latices, aqueous woodstains, wood protection and varnish stains.

Industrial Summit Technology

SKYBOND® 700

SKYBOND® 700 is a heat reactive aromatic resin which can be thermally cured to a crosslinked polyimide. It is specifically designed for structural and specially applications where extended exposure at temperatures up to 700° F is required.

Industrial Summit Technology

SKYBOND® 705

SKYBOND® 705 is a heat reactive aromatic resin which can be thermally cured to a crosslinked polyimide with high heat resistance. It has good film forming properties and it is designed for coating applications where extended high temperature exposure is required.

Lawter

HYDRO-REZ™ 5614A

Hydro-Rez™ 5614 A is a fumarated rosin ester that is soluble in alcohol and can be dispersed in water using ammonia or morpholine. The high melting point promotes fast solvent release and good leveling properties, and is compatible with shellac and Manila copal resins. Hydro-Rez 5614 A is recommended for use in solvent or water-based flexographic inks. This resin is also recommended for use in mineral spirit varnishes.

MPC-PROKIM Chemicals

MPC-PROKIM Chemicals AGSL70 P

MPC-PROKIM Chemicals AGSL70 P is an air drying long oil alkyd resin based on soya bean fatty acid. It provides a very clear varnish. It presents a good gloss retention, a good durability, a good color stability, a good wettability, a good high-build, a sufficient spread, a good brushability as well as a good yellowing and aging resistance.

BTC Europe GmbH

Acronal® 6323

Acronal® 6323 is an acrylic and acrylate-based binder and resin, presented in liquid form with water as its carrier. As a key component in CASE ingredients, it excels in various applications. In the realm of paints and coatings, it contributes to architectural coatings, wood coatings and finishes, and industrial coatings. The building and construction sector benefits from its use in building envelopes and roofing, architectural coatings, and building materials such as siding and trim. This versatile solution enhances formulations, ensuring top-notch performance in diverse coating applications within the CASE realm.

BTC Europe GmbH

BTC Europe GmbH Piperazine app. 68%

BTC Europe GmbH Piperazine app. 68% is a cutting-edge solution designed for gas treatment processes. Piperazine, a versatile binder and reagent belonging to the Azines chemical family, plays a pivotal role in various applications, including base chemicals and intermediates, CASE ingredients, and industrial additives and materials. Specifically tailored for use in varnishes, this app optimizes coating processes with a 68% concentration.

BTC Europe GmbH

FoamStar® ED 2522

FoamStar® ED 2522 is a high-performance, ultra-low SVOC silicone emulsion defoamer for premium water-based paints, clear coats, and inks. It provides excellent foam suppression during grinding and application, retains antifoam efficiency during storage, and is easy to incorporate without the use of strong shear forces. Its chemical nature involves an emulsion of organo-modified silicones.

BTC Europe GmbH

Tinuvin® 479-DW (N)

Tinuvin® 479-DW (N) is an aqueous triazine-based UV absorber dispersion designed for applications in coatings, overprint varnishes, adhesives, and sealants. Its function primarily lies in UV absorption. This dispersion appears as a slightly yellowish liquid. Its end uses encompass 2K (2-component) coatings, radiation-curable coatings, varnishes, and waterborne coatings. Notable features include thermal resistance, non-migrating properties, high performance, and excellent photopermanence.

BTC Europe GmbH

Tinuvin® 123

Tinuvin® 123 is a light stabilizer primarily used in the automotive, transportation, and paints/coatings industries. Its liquid form makes it suitable for various coating types like stains and varnishes. Known for its low blistering, crack resistance, and low volatility, it helps enhance the durability and quality of coatings subjected to light exposure.

BTC Europe GmbH

Efka® SL 3210

Efka® SL 3210 is a slip and leveling agent, a very effective additive to increase substrate wetting, slip, surface smoothness, and gloss. It has good compatibility with a broad range of printing ink systems and is relatively insensitive to pin-holing, even at high dosage. The chemical nature is organically modified polysiloxane.

BTC Europe GmbH

Tinuvin® 477

Tinuvin® 477 is a liquid, high-performance UV absorber designed for solvent-borne and liquid UV-curable coatings. Formulated with a red-shifted tris-resorcinol-triazine chromophore, it is well-suited for safeguarding UVA-sensitive substrates or ingredients. Key features and benefits include a hydroxyphenyl-triazine UV absorber with high extinction in the UV-A range, excellent photo-permanence, and minimal interaction with metal catalysts and amine crosslinkers.

BTC Europe GmbH

BTC Europe GmbH Zinc Oxide Solution No.1

BTC Europe GmbH Zinc Oxide Solution No.1 that functions as a crosslinking agent, is crafted for applications in the paints and coatings and printing and packaging markets. BTC Europe GmbH Zinc Oxide Solution No.1 has features such as heat resistance, improved hardness, and water resistance, it finds utility in diverse applications, including wood coatings and finishes, industrial coatings, overprint varnishes, film and foil coatings. Specifically compatible with wood substrates, this solution is ideal for creating varnishes and waterborne coatings, while also serving as a crucial component in waterborne ink formulations.

BTC Europe GmbH

Efka® FA 4601

Efka® FA 4601 is a multifunctional liquid marvel that serves as a rheology modifier, thickener, emulsifier, and dispersant. This versatile formulation seamlessly integrates with nitrocellulose, polyurethanes (PU), chlorinated rubbers, epoxies (EP), and alkyds, showcasing its compatibility with various polymers and resins. Efka® FA 4601, in its liquid form, ensures ease of application.

BTC Europe GmbH

Poligen® WE 1

Poligen® WE 1 is a versatile liquid product serving as an Abrasion Resistant, Release and Mold Agent. It finds applications in Paper Manufacturing and Textiles, offering properties such as Anti-Abrasion and Polishing.

BTC Europe GmbH

Tinopal® SFP

Tinopal® SFP is a fluorescent optical brightener used in photographic color developer baths, adhesive compositions, or as fluorescent tracers. It exists as a light yellow powder and is recognized for its brilliant bluish whitening effects, anti-stain properties, and excellent solubility in water. Its end uses encompass varnishes and waterborne coatings, and it is known for its outstanding solubility and stain resistance.

BTC Europe GmbH

Poligen® WE 6

Poligen® WE 6 offers multifunctional use as an Abrasion Resistant, Release, Mold Release, and Polishing Agent. It boasts properties like Corrosion Resistance and improved Physical and Mechanical Properties. Available in powder, solid, and wax forms, it supports various industrial applications, including cleaning and materials enhancement.

BTC Europe GmbH

Efka® PL 5520 V

Efka® PL 5520 V, a versatile plasticizer, is categorized under CASE Ingredients. This innovative product belongs to the CASE Ingredients—Additives and Functional Additives product families, designed specifically for plasticizing applications. Efka® PL 5520 V utilizes advanced technologies to enhance flexibility and performance. As a Case Ingredients technology, it brings unparalleled plasticizing capabilities, ensuring optimal functionality in various applications.

BTC Europe GmbH

Joncryl® Wax 4

Joncryl® Wax 4 is a liquid surface modifier and binder designed for paints and coatings and the printing and packaging markets. With benefits like improved slip and abrasion resistance, it excels in packaging coatings and overprint varnishes. This versatile liquid is a game-changer in waterborne ink formulations.

BTC Europe GmbH

Tinopal® OB CO

Tinopal® OB CO is a fluorescent optical brightener that offers excellent heat resistance, high chemical stability, and brilliant bluish whitening effects. It exhibits good compatibility with a wide range of resins for coating and printing ink applications. This product is available in the form of a yellow powder.