Products in Paints & Coatings: Dispersant

STEPSPERSE® 160S is an anionic polymeric dispersant suitable for dispersing phthalo blue pigment systems in waterborne applications. No wetting agents are necessary. Typical loading levels are 10–15% solids on the weight of pigment (mass of dispersant used x mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

MAKON® P105 is a nonionic eo/po block copolymer that exhibits good oil-in-water emulsification properties. It can be used in a variety of markets, including agriculture, industrial, and paints and coatings. Applications for best fit are agricultural pesticide formulations, dispersants, emulsifiers, and industrial cleaning.

STEPSPERSE® 250 is a nonionic polymeric dispersant used for dispersing carbon black in waterborne systems. No wetting agents are necessary. Typical loading levels are 4-8% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

STEPSPERSE® 163P is an anionic polymeric dispersant suitable for iron oxide pigments in waterborne applications. No wetting agents are necessary. Typical loading levels are 2–4% solids on the weight of pigment (mass of dispersant used/mass of pigment used x 100%). A ladder study is advised to determine optimal dosage levels.

G-3300 operates as an anionic surfactant with versatile applications. It is employed as a pigment dispersant in both water- and oil-based paints. Additionally, it serves as an effective wetting agent suitable for waterborne coatings. Its integration can take place during the letdown phase of production or through post-addition to the final formulation. The potential positive effects encompass gloss enhancement, improved color acceptance, and enhanced washability.

WACKER® Silane M1-Triethoxy is a clear, colorless liquid with an odor characteristic of alcohols. The use of WACKER® Silane M1-Triethoxy to render fillers water repellent considerably improves their dispersibility and reduces their sedimentation tendency. Mineral-filled plastics can thus be processed more easily. Additionally, resistance to moisture and chemicals is much higher.

VISIOMER® MPEG 500 MA is a pure and water-free methoxy polyethylene glycol methacrylate monomer, available in liquid form for easy handling. It is soluble in water and consists of approximately 12 ethylene oxide (EO) units in its chain. Industries such as coatings, healthcare, and personal care can utilize this monomer for various applications.

ZETASPERSE® 3800 dispersant is specifically designed to offer robust stabilization for pigments, fillers, and various solids within aqueous dispersions. This dispersant is based on a comb polymer with a moderate molecular weight, providing strong steric stabilization. Its versatile characteristics make it suitable for a wide array of formulation needs.

DIACARNA™ 30M is a copolymer of α-olefin and maleic anhydride. Applications include as a compounding additive for filler dispersant and adhesion promoter for PA/GF composites.

SILCO® GA 1069 is a block copolymer in water that can be used as a wetting and dispersing additive for aqueous systems, and as a standalone dispersing matrix for all types of pigments. The preferred fields of application include: Printing inks Water-based systems

SILCO® GA 1011 is a hydroxy-functional block copolymer in water. Due to its chemical structure, SILCO® GA 1011 is particularly recommended as a wetting and dispersing additive for organic pigments and carbon black. The preferred fields of application include: Printing inks Water-based systems

SILCO® GA 1018 is a wetting and dispersing additive for resin-free and resin-containing formulations, used in combination with a second anionic compound. Due to its chemical structure, it is particularly recommended for all organic pigments. The preferred fields of application include: Printing inks Water-based systems

Alcosperse 797 is a novel hydrophobic dispersant for water borne industrial coatings. Alcosperse 797 has good dispersing efficiency with a variety of pigments and fillers used in industrial coating formulations.

Bermocoll EBS 451 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EBM 8000 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll Prime 2500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance, and superior color stability. It improves the consistency, the stability, and the water retention of water-based paints.

Finnfix® 2000 CMC is a purified high viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is designed to offer superior viscosity suitable for demanding industrial applications. Finnfix® 2000 CMC provides excellent thickening and stabilizing properties, enhancing the performance and durability of formulated products. This product supports sustainable practices by utilizing responsibly sourced materials, ensuring consistent quality and reliability in manufacturing processes where high viscosity and effective rheological control are essential.

Bermocoll E 230 FQ is non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water based products. Bermocoll E 230 FQ is a low viscosity grade of ethyl hydroxyethyl cellulose.

Bermocoll EBS 351 FQ is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EHM 200 is an associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Bermocoll EM 7000 FQ is a non-ionic, water soluble cellulose ether. It improves the consistency, the stability, and the water retention of water-based products.

Bermocoll EHM 300 is associative non-ionic, watersoluble cellulose ether that improves the rheological properties of water-based paints.

Alcosperse 787 is a novel hydrophobically modified acrylic copolymer dispersing agent developed to help formulators create innovative waterborne paints and coatings with excellent performance characteristics over competitive dispersants such as water mark resistance, alkaline and salt resistance, and other related hydrotropic effects. Key Benefits Excellent color acceptance Outstanding pigment dispersing efficiency Strong hydrophobic properties Long shelf life Features Alkali resistance Good storage stability Salt resistance Water mark resistance Water resistance

Ethylan EF-60 is a VOC-free additive used to promote storage stability, especially at low temperatures. It acts as an anti-freezing agent, dispersant, wetting agent and freeze-thaw (FT) stabilizer in premium-grade waterborne latex paints and adhesive systems. Ethylan EF-60 can be used to replace propylene glycol, PEG and EG in these formulations to meet regulatory requirements without compromising on processability and other latex binder performance. Benefits: Lower-odor, safer formulations Better appearance and finish Compliance with environmental regulations High efficacy FT performance for a wide range of waterborne formulations Features: APEO-free VOC-free Excellent FT stability Maintains open time to impart processability Better pigment wetting and dispersion compared to traditional FT agents

Finnfix® 5 CMC is a purified low-viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is designed for applications requiring a finely tuned viscosity profile and reliable performance. Finnfix® 5 CMC enhances water retention and stability in various industrial processes, ensuring optimal efficiency and product quality. This versatile additive supports sustainable practices while meeting the stringent demands of modern manufacturing environments.

Bermocoll EBS 481 FQ is a non-ionic, water solublecellulose ether with enhanced enzyme resistance. Itimproves the consistency, the stability, and the waterretention of water-based products.

Bermocoll Prime 3500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll Prime 1000 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints. Bermocoll EBM 10 000 is a low viscosity grade of methyl ethylhydroxyethyl cellulose.

Finnfix® 700 CMC is a purified medium-viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is specifically formulated to provide optimal viscosity characteristics for a range of industrial applications. Finnfix® 700 CMC enhances water retention, improves stability, and offers excellent rheological properties in various processes. This versatile additive supports sustainable practices while meeting the high standards required in modern manufacturing environments.

Finnfix® 2000 G CMC is a purified high viscous sodium carboxymethyl cellulose derived from sustainably sourced cellulose. It is specifically formulated to provide robust viscosity suitable for demanding industrial applications. Finnfix® 2000 G CMC excels in providing superior thickening and stabilizing properties, enhancing the performance and durability of various formulations. This product supports sustainable practices by utilizing responsibly sourced materials, ensuring consistent quality and reliability in manufacturing processes where high viscosity and effective rheological control are crucial.

Alcosperse 747 is a patented hydrophobically modified copolymer designed for use in detergent and cleaning formulations. It can be used as a pigment dispersant in acrylic emulsion-based paint formulations to deliver efficient, reliable color production. It is especially effective for dispersing water-resistant pigments, clays and carbon black. It is an excellent choice for acrylic emulsion-based paint formulations. Alcosperse 747 Benefits Excellent pigment dispersion Outstanding color acceptance Good hydrophobic properties Watermark-resistant performance Long shelf life Alcosperse 747 Features VOC-free Low molecular weight Easy to handle and incorporate into formulations Good storage stability

Bermocoll Prime 1500 is a non-ionic, water soluble cellulose ether with enhanced enzymatic resistance and superior color stability. It improves the consistency, the stability, and the water retention of water based paints.

Bermocoll EBM 5500 is a non-ionic, water soluble cellulose ether with enhanced enzyme resistance. It improves the consistency, the stability, and the water retention of water-based products. Bermocoll EBM 5500 is a high viscosity grade of methyl ethyl hydroxyethyl cellulose.

Bermocoll EHM 500 is a high efficiency associative non-ionic, water-soluble cellulose ether that improves the rheological properties of water-based paints.

Alcosperse 602N a liquid acrylate homopolymer. It can be used as a dispersant for a wide range of pigments and fillers in waterborne systems for paint, coatings and printing inks. It is especially effective for dispersing TiO2, CaCO3, and mineral clays in waterborne systems. Benefits  Excellent dispersion of a wide range of pigments and fillers Outstanding hydrolytic stability Compatible with most surfactants Features VOC-free Low molecular weight Incorporates easily into formulations Easy to handle Watermark resistance

Alcosperse 492 is a polyacrylate ammonia salt dispersing agent often used in clay dispersant applications.