Products in Paints & Coatings: Water Repellent

XIAMETER(TM) PMX-200 Silicone Fluid 20cSt is a polydimethylsiloxane fluid commonly used as a base fluid in personal care products due to its excellent spreading characteristics. It is clear, tasteless, essentially odorless, and non-greasy. Commercial bulk-polymerized dimethyl silicone fluids, such as XIAMETER(TM) PMX-200 Silicone Fluid 20cSt, typically contain trace amounts of impurities.

SILRES® BS 1360 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It can be added in undiluted form to aqueous masonry protection agents either during or after their production. Similar to SILRES® BS 1346, SILRES® BS 1360 is used undiluted as a hydrophobizing additive for aqueous masonry paints. Its primary functions are to enhance water repellency, water resistance, water vapor permeability, processability, and anti-blocking properties.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

SILRES® WH is a water-thinnable, solventless emulsion of a functional silicone resin. Dilute solutions of SILRES® WH are used as high-quality water repellents for impregnating wood surfaces. Undiluted SILRES® WH can also be used as a high-quality hydrophobizing additive for aqueous wood coatings and wood stains.

VISIOMER® Terra C13-MA (methacrylic ester 13.0) is a specialty monomer that offers enhanced water repellency and improved resistance against polar solvents. It is commonly employed to increase the hydrophobicity of resins, making them more resistant to water and other polar substances. This particular monomer is derived from raw materials obtained from natural oils, highlighting its environmentally friendly nature. VISIOMER® Terra C13-MA finds applications in various industries including adhesives and sealants, coatings, construction, oil and gas, paper, personal care, and healthcare.

SILRES® BS Creme F is an aqueous, solvent-based, creamy hydrophobic impregnating agent based on a mixture of silane and siloxane. It is a high-quality specialty product recommended for the hydrophobic impregnation of natural mineral substrates such as brick, limesandstone, and sandstone. When applied correctly, it effectively reduces water uptake, provides deep penetration, and produces a desirable beading effect. Importantly, the treated surface maintains its natural appearance.

SILRES® BS 1346 is a nonionic, solvent-free, water-dilutable emulsion of a reactive polysiloxane. It is used in its undiluted form as a hydrophobizing additive for aqueous masonry paints or plasters. Its purpose is to increase water repellency, water resistance, and water vapor permeability while also enhancing processability and antiblocking properties.

SILRES® BS 1340 is a nonionic, solvent-free, waterborne emulsion of a reactive polysiloxane. It is specifically used in the formulation of water-resistant coatings. SILRES® BS 1340 can be directly incorporated, without dilution, into waterborne masonry paints and plasters either during or after their production.

Gelest TETRAMETHOXYSILANE, oligomeric hydrolysate (SIT7510.3) has good mechanical properties and improves adhesion. It functions as a crosslinking agent, surface modifier, water repellent, and intermediate and is commonly used in chemical production.

Gelest TETRAMETHOXYSILANE, 97% (SIT7510.0) has good mechanical properties and improves adhesion. It functions as a crosslinking agent, surface modifier, water repellent, and intermediate and is commonly used in chemical production.

Gelest ISOBUTYLTRIMETHOXYSILANE (SII6453.7) is a branched structure that provides hydrophobic surface treatments for architectural coatings. This product functions as an adhesion promoter, coupling agent, and water repellent.

AFCONA 3522 is an additive to improve the surface characteristics of waterbased coatings. It is a waterbased emulsion of an organically modified polysiloxane, with the active ingredient being a hydrophobic polymer that gives water resistance and slip performance to the coating after drying. This product also offers low foam stabilization. AFCONA 3522 is recommended for use in all types of waterbased coatings.

ASCONIUM® 110 is a liquid corrosion inhibitor for long-term protection of dry film coatings, mainly used in solventborne alkyd clear coats.

ASCONIUM® 140 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on alkyd or urethane-alkyd resins, and waterborne paints based on 1K or 2K polyurethane resins.

ASCONIUM® 111 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd, urethane-alkyd, 1K or 2K polyurethane resins.

ASCONIUM® 130 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints; It is mainly used in waterborne or solventborne epoxy resins.

ASCONIUM® 142DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins.

ASCONIUM® 141S1 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in solventborne coatings based on 2K acrylic or 2K PU resins, and waterborne paints based on epoxy resins.

ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products;

ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCONIUM® 112 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on pure or modified alkyd, polyester, 1K or 2K polyurethane resins.

ASCONIUM® 114 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on alkyd or modified alkyd resins, and waterborne paints based on acrylic resins.

ASCONIUM® 144DA is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU or 2K PU resins.

ASCONIUM® 143 is a liquid corrosion inhibitor for long-term protection of dry film clear coats or paints. It is mainly used in waterborne or solventborne coatings based on 1K acrylic, 2K acrylic, 1K PU, 2K PU or epoxy resins.

ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCONIUM® 111 replaces mineral anticorrosion pigments or improves their performance in waterborne or solvent borne metal coatings. It acts as a hydrophobic agent, enhancing dry film's water resistance.

ASCONIUM® 114, a versatile solution engineered to enhance metal coatings. This innovative product seamlessly replaces mineral anticorrosion pigments or boosts their performance in waterborne or solventborne coatings. Acting as a hydrophobic agent, ASCONIUM® 114 significantly enhances the water resistance of dry films. With its advanced formulation, ASCONIUM® 114 ensures superior protection against corrosion.

ASCONIUM® 141S1 is a liquid anticorrosion additive for metal coatings, replacing mineral anticorrosion pigments or enhancing their performance in waterborne or solvent borne metal coatings. It acts as a hydrophobic agent, improving dry-film's water resistance.

AquaBead® 270E is an anionic paraffin/polyethylene wax emulsion ideal for water repellency and weather/moisture resistance.Features and Benefits Provides excellent initial and long term water beading Imparts weather and moisture resistance Wax emulsion particle does not reduce gloss or clarity Anionic emulsiontabilization contributes to immediate hydrophobicity

ASCONIUM® 140, a cutting-edge solution crafted to elevate metal coatings. This advanced product seamlessly replaces mineral anticorrosion pigments or enhances their performance in both waterborne and solventborne coatings. ASCONIUM® 140 acts as a hydrophobic agent, significantly improving the water resistance of dry-films. With its innovative formulation, ASCONIUM® 140 ensures superior protection against corrosion.

ASCOTRAN® HPB is a ready-to-use liquid antiflash-rust additive designed for all waterborne coatings. It acts as a hydrophobic agent, protecting almost dry films under severe conditions of ambient humidity. Additionally, it serves as a corrosion inhibitor for protecting metal packaging.

Ascotran® AL4 is a convenient liquid antiflash-rust additive formulated for waterborne coatings. This ready-to-use solution acts as a hydrophobic agent, safeguarding nearly dry films even in harsh ambient humidity conditions. Ascotran® AL4 serves as a corrosion inhibitor, ensuring protection for metal packaging. Ideal for various coating applications, it offers reliable defense against rust and corrosion, preserving the integrity of metal surfaces.