Products in Paints & Coatings: Aluminum Compounds

HALOX® XTAIN® A is a white, non-refractive, tannin stain-inhibiting pigment used in protective coating systems. HALOX® XTAIN® A is a highly efficient tannin stain inhibitor providing a high level of performance and compatibility in a variety of resin systems such as styrene-butadiene latexes, acrylic latexes, vinyl acrylic latexes, and solventborne alkyds.

Portafill® A10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portafill® A25 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portafill® A40 is produced from carefully selected synthetic aluminum hydroxide (ATH). The standardized quality of Portafill® A is guaranteed by means of an ISO 9001-certified quality management plan. The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A micronized functional fillers are used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A fillers are less prone to the phenomenon known as "water spotting" in comparison to barium sulfate. It has very good chemical inertness (for outdoor and chemical applications).

Portafill® A25/10 is produced from carefully selected synthetic aluminum hydroxide (ATH). The chemical composition of the raw material and the finished product is closely monitored, and the particle size is kept within a narrow variation. Portafill® A25/10 micronized functional filler is used in thermosetting powder coatings as an alternative to barium sulfate, when the high density is a limitation. In addition, Portafill® A25/10 filler is less prone to the phenomena known as "water spotting" in comparison to barium sulfate.

Micro Powders Inc MPP-611AL is a highly engineered HDPE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Effective replacement for PTFE additives Easier-to-disperse nanotechnology in a safe, non- nano powder

Superslip™ 6515AL is a highly engineered HDPE/amide wax/alumina nanocomposite for maximum scratch, scuff and block resistance.Features and Benefits Maximum scratch resistance; equal to PE/PTFE additives HDPE/amide wax composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Good abrasion resistance with slip and lubricity Amide wax component provides excellent antiblocking and release properties Ideal for can and container coatings; 21CFR 175.300 approved Compare to Superslip 6515XF

Polyfluo® 523AL ia A highly engineered HDPE/PTFE/alumina nanocomposite for unsurpassed scratch and scuff resistance.Features and Benefits Maximum scratch and scuff resistance with slip and lubricity HDPE/PTFE composite reinforced with 300 nm aluminum oxide nanoparticles (Mohs Hardness 9) Easier-to-disperse nanotechnology in a safe, non- nano powder Composite particle density maximizes efficiency and minimizes settling Extra fine particle size provides excellent gloss retention and film clarity Composite wax/alumina particle is less abrasive on processing equipment compared to free alumina

Nanoflake™ UNMILLED GF350nm by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is a Inorganic and Mineral Origin product.

K-KAT® 5218 is an aluminum chelate complex catalyst that provides an excellent blend of both fast dry time and increased pot life when used in combination with 2,4 pentanedione. It is recommended for 2K polyurethanes, pultrusion and RIM applications.

UCECOAT® 7700 is a white radiation-curable coating formulated for the building and construction, paints and coatings, and printing and packaging markets. With labeling claims of being solvent-free, tin-free, and VOC-free, it's designed for diverse applications such as wood finishes, decorative paints, industrial coatings, and packaging coatings on paper and wood substrates. This clearcoat offers versatile application methods, including curtain coating, roller, and spray, making it suitable for foil coatings and film and foil applications in plastics and elastomers, ensuring a seamless and efficient finish.

Marathwada Chemicals Aluminum Stearate is a soft, fine fluffy free flowing bulky powder having characteristic odor. It has mild antiseptic and astringent properties. It imparts smoothness to creams. It is a normal Aluminum soap of Stearic Acid and finds users in many industries. It is water repellent by nature and insoluble in water.

Aluminium paste, non leafing

SpaceRite S-3 is a fine crystalline, aluminum trihydroxide with uniform particles averaging about one micron in diameter. It is an organic-free pure white powder produced by a proprietary precipitation process that closely controls particle-size distributions. SpaceRite S-3 can also replace other extenders providing enhanced performance and benefits in coatings and adhesives.

Demeter Technologies Aluminum Oxide YL-4 is a high purity high cut aluminum oxide powders for a variety of surface correction formulations.

Minerios Ouro Branco Agalmatolite is a mineral of inorganic constitution basically composed of aluminum silicate, chemically inert, white powder until slightly creamy or grayish, fine, odorless, insoluble extracted from deposits and processed in different granulometric ranges according to the desired application. It is presented in lamellar crystalline form.

For MAL Magyar Aluminum VISCOSITY OPTIMIZED HYDRATES ALOLT 704 Ground and finely precipitated hydrates are mainly used as environmentally friendly flame retardant filler materials in the production of: cable insulation; thermoplastics; cross-linked elastomers; polyurethanes; PVC; water-based dispersions; polyester resins; papers; epoxy resins; paints. All these grades are white (whiteness > 90 %).

NYACOL® AL25 have been developed utilizing new innovative technology for colloidal alumina. AL25 is a colloidal dispersions of boehmite with dispersed sizes of 70-80 nm at 20% Al2O3 content. Typically AL25 will have up to 500 ppm Na content.

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

euroMinerals inpcc is precipitated calcium carbonate with different crystalline forms which yield to predetermined physical properties. Special controls and a mastery of the parameters involved in the precipitation reaction and later treatments are required in order to produce precipitated calcium carbonates.

Manchem® Zircoaluminates feature an inorganic metal component and an organic component. The bi-functional nature enables them to “bridge” or couple two or more species through irreversible chemical interactions. Common applications which are well suited for this adhesion technology are Coatings, Inks, Rubber and Adhesives.

Aluminium flake powder

Manalox™ 230 reacts quite rapidly and gels without the grainy structures often encountered at higher temperatures.Manalox 230 provides ideal gelling reaction if you require short cycle times or are limited by lower temperature capabilities. Manalox 230 does not produce any volatile byproduct alcohols during the gelling reaction.

ADDAPT_x005F_x0001_ SILSTAB HL+ is a solvent free, Potassium Silicate solution optimized with a hydrophobic component for use in aqueous systems such as Renders (Putz), Textured Masonry Coatings and Interior Paints Stabilized Potassium Silicate solution with a hydrophobic component in water.

Aluminium flake powder

Benda-Lutz Leafing 1041 exhibits high surface tension due to which the pigment migrates towards the surface of paint film. This enrichment at the boundary protects the paint film from weathering, radiation and corrosion. Provides a strong reflective metal layer at the paint surface giving high metallic brilliance and gloss. Preferred applications include corrosion protection, reflective, maintenance, marine, roof, high heat resistance, chrome effect, and aerosol paints and coatings.

Ceno Technolgies ALAG 450 Powder deposits precisely controlled amounts of sliver (and other metals including gold, palladium, iridium, etc.) onto nanoparticles, thus producing highly reflective materials with the conductivity of the precious metals but without the high cost or weight. Further research has resulted in materials which can absorb electromagnetic energy instead of simply reflecting it. Please contact us directly for further details and recommendations.

Niknam Chemicals Flamex is a one pack smoke supperesant. We manufacture and export a wide range of Flamex/ FLame Guard. Flamex is an aluminum, zinc & magnesium inorganic complex synergist, which has superior flame retardance as compared to traditional synergists, and dramatically reduces smoke in PVC FRLS Compound. Flamex is also a very effective flame retardant in rigid PVC (UPVC) system without the need for Antimony Trioxide. Commonly known as Flamex.

ALBA 5M is a solvent-based, standard non-leafing aluminum paste with a fine finesse. It is recommended for general industrial coatings, marine coatings, thermo resistant coatings, and paper coatings, hammer topcoats, polychromatic finishes and can/coil coatings, and is suitable for spray cans and printing inks

Aluminium flake powder

DCL Corporation Green 30C678 is a dark green powder produced by high temperature calcination. This pigment has good UV and visible opacity, is chemically inert, heat resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory. It has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are needed. It is compatible with most resin systems and polymers, and is non-warping. Typical applications (non inclusive) are liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

Boud Minerals White Aluminum Oxide is one of the hardest minerals after diamond. It is a synthetic mineral.

Demeter Technologies Aluminum Oxide YL-8 is a high purity good cut/fine finish aluminum oxide powders for a variety of surface correction formulations.

Aluminium flake powder

Aluminium flake powder

Martinal® ON-313 S is a 15 micron, ground aluminum hydroxide used as a flame retardant and smoke suppressant, produced in Bergheim, Germany.