Products in Paints & Coatings: Silicates

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

Dynasylan® A is also known as TEOS (tetraethoxysilane), is the ethyl ester of orthosilicic acid. This colorless, low-viscosity liquid boasts a SiO content of 28.5%. Utilization involves acid- or alkali-catalyzed hydrolysis, leveraging all four ethoxy groups for reaction and earning it tetrafunctional status. Hydrolysis initiates silanol group formation, which further condenses to establish robust siloxane bonds (-Si-O-Si-). Notably, condensation begins before hydrolysis concludes, with ongoing condensation during storage resulting in gel formation. Gelation rate hinges on water concentration.

Dynasylan® SILBOND® Condensed serves as a raw material composed of tetraethyl orthosilicate (TEOS; Si[OEt]4 ). This substance is utilized for acid- or alkali-catalyzed hydrolysis and subsequent condensation reactions, commonly known as the sol-gel process. The rate of gelation is influenced by the concentration of water and the pH.

Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasts a silica content ranging from 32.7% to 34.0% (as SiO2). Formulated for two-component inorganic zinc-rich primers, this material brings about improved toughness and exceptional performance in high-temperature applications. The elevated SiO2 content directly contributes to its enhanced toughness.

Dynasylan® SILBOND® 40 is an ethyl polysilicate, emerges from partial hydrolysis of tetraethyl orthosilicate (TEOS). This transformation converts ethoxy groups into hydroxyl groups, generating silanols. Subsequent condensation of silanols engenders siloxane bonds (-Si-O-Si-O-) and prompts eventual gelation. Often deployed as an intermediary, Dynasylan® SILBOND® 40 undergoes further hydrolysis to produce a binder suitable for diverse applications. These include inorganic zinc-rich primers, investment casting molds, ceramic shapes, coatings, and thermal insulation.

SILESTER® XAR is a ready-to-use, prehydrolyzed ethyl silicate hybrid binder. The solvent used in SILESTER® XAR is a blend of ethanol and 2-propanol. This product is conveniently prepared and can be directly utilized in the production of ceramic slips, ramming mixes, and anticorrosion paints without any further processing steps.

Casiflux CA 45 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 5000 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Artic Mist is an off-white, high-purity, extremely platy, very fine talc serving polymer, rubber, and coatings applications. Artic Mist® is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, plastic nucleation, foamed plastics, plastic films, and wire and cable applications.

Casiflux M 75 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Crys-Talc® 4H-4HC is a high-purity, high-brightness, platy, medium-sized talc used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Crys-Talc® 4H is used in solid-color and semitransparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Crys-Talc® 4H has a platy, hydrophobic structure used in  architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking  ability.

Casiflux M 50050 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 7020 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 38 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Casiflux G38 is wollastonite (calcium silicate). Due to its structure, the use of wollastonite improves the mechanical properties of the sealant and adhesive. This product helps as a mechanical reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Casiflux A 90 is a white wollastonite (calcium silicate) powder that is used in glazes and ceramic bodies. It is used as a filler for paints, plastics, welding electrodes, metallurgical powders, cement fiber boards, calcium silicate boards and bricks, and low temperature refractories.

Casiflux A 25 is wollastonite (calcium silicate), which helps in reducing the melting temperature of the body and allows for the development of new mineral phases along the firing cycle. This product helps as a reinforcement filler for paints, sealants, road marking paints, brake linings, and gaskets.

Nicron® 504 is a high-purity microcrystalline talc. The platy nature of Nicron® 504 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 504 is also used in paints to improve sag resistance and maximize prime pigment extension.

Silverline 303 is a high-purity microcrystalline talc product. Silverline 303 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. This product can be used as a cost-effective reinforcing agent or a dusting/parting agent.

Mistron® 604 is a high-purity microcrystalline talc with more than 98% talc content. The lamellar nature of Mistron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability.

JetFil® P500 is an off-white, high-purity, extremely platy, fine talc. It is recommended for improving stiffness, HDT, and dimensional stability in general-purpose plastics applications, including sheets and thermoformed plastics. It could also help in achieving good long-term thermal stability (heat aging).

Silverline 403 is an off-white, high-purity, platy, fine talc. It enhances film strength and flexibility, provides barrier properties in architectural and industrial primers, and improves corrosion resistance and stain-blocking ability. Silverline 403 is used in paints to improve low-shear viscosity and maximize prime pigment extension.

Mistron® 353 is a high-purity microcrystalline talc. Mistron® 353 is used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron® 353 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Mistron® 403 is a high-purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron® 403 also prevents tannin bleed and improves gloss uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron® 403 enhances film strength and flexibility.

Nicron® 604 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 604 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 604 is also used in paints to improve sag resistance and maximize prime pigment extension.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Nicron® 554 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 554 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 554 is also used in paints to improve sag resistance and maximize prime pigment extension.

JetFil® P350 is an off-white, high-purity, extremely platy talc with more than 98% talc content. This product is recommended for improving stiffness, HDT, and dimensional stability in general-purpose and commodity plastics applications. JetFil® P350 could also help in achieving good long-term thermal stability (heat aging).

Mistron® CF5A-M is a high-purity engineered talc that has a very low viscosity build, allowing it to be formulated at high loading in low-VOC industrial coatings while maintaining excellent anti-settling properties and superior corrosion resistance. This product is composed of more than 98% talc.

Mistron® 554 is an off-white, high-purity, platy-fine talc. Its platy nature improves barrier properties, corrosion resistance, and stain blocking ability in architectural and industrial primers. Mistron® 554 is also used in topcoats to reduce hard settling, improve sag resistance, and extend prime pigments.

Nicron® 503 is a high purity, 5-Hegman microcrystalline talc product with minimal viscosity build. Nicron® 503 is part of the Engineered Series of Magris Talc products that offer unique particle size distributions for improved paint performance properties. Nicron® 503 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 503 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 002 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 002 enhances film strength and flexibility in sealant formulations and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 002 is used in topcoats, block fillers, traffic paints, texture paints, and composite compounds.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.