Products in Paints & Coatings: Primer

MultiTech Surfactant Ais a REACH-registered; TSCA-pending sophorolipid biosurfactant (INCI: glycolipid) that can be tailored for use in a variety of industrial applications, by acting as a dispersant, emulsifier, wetting agent and more. MultiTech Surfactant A attributes:Low HLBLow/no foamingHydrophobicExcellent emulsifier MultiTech Surfactant A biosurfactants:USDA certified 100% biobasedReadily biodegradableNo prop 65 issues & no 1,4-dioxane Non-GMO & palm oil freeLow carbon footprint

MultiTech Corrosion Inhibitor Pigment C is non toxic and does not contain heavy metals such as zinc or other hazardous ingredients.

MultiTech MultiFunctional K is a natural raw cellulose. MultiTech MultiFunctional K is a beige colored softwood product with a cubic structure. The main particle range is 70-150 µm. It is a sustainable material for various applications as reinforcement and functional filler.

BaseCase Solvent B used as a solvent in lacquers, lacquer thinners, etch primers, liquid printing inks, foundry dressings and stain removers. Raw material for the manufacture of acetates, xanthates, phthalates, mixed alkylated glycol ethers and butylated resins. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MultiTech Corrosion Inhibitor Pigment A is a highly effective anti-corrosive pigment designed to meet the specific performance requirements for coil coatings and other thin-film applications.

VINNAPAS® 530 ND is a construction dispersion for primers, cement admixes, and repair mortars. VINNAPAS® 530 ND is based on a vinyl acetate/ethylene copolymer. It reduces the elastic modulus and enhances adhesion. VINNAPAS® 530 ND is an unplasticized 55% dispersion of a vinyl acetate/ethylene copolymer in water.

ELASTOSIL® RD 3151 F is a silicone rubber dispersion used for textile coatings and as a primer for bonding silicone rubber on PEX surfaces. It finds application in industrial textiles. The dispersion offers properties such as high abrasion resistance, easy-to-clean surfaces, and high heat resistance.

WACKER® Silicate TES 40 WN is an ethyl silicate polymer. It is a low-viscosity liquid that provides approximately 41% of silicon dioxide (silica) upon complete hydrolysis. WACKER® Silicate TES 40 WN is used for the precipitation of polymeric SiO2 structures (silica) upon complete hydrolysis, with ethanol being produced as a by-product.

VINNAPAS® SAF 608 is a water-based dispersion containing a fine-particle-sized copolymer of styrene and acrylic acid ester. It has a solid content of 50%. This product is manufactured without the inclusion of coalescents, organic solvents, plasticizers, or compounds containing alkyl phenol ethoxylate (APEO). It exhibits excellent penetration into porous substrates and offers great flexibility.

SILRES® BS 310 is a solventless emulsion that can be thinned with water. It consists of polysiloxane modified with a functional silicone resin. This product is specifically designed to be added to aqueous masonry coatings and primers, either during or after their manufacture. When used undiluted, SILRES® BS 310 serves as an additive for aqueous indoor paints or coatings. Its purpose is to enhance the workability of the paint or coating, resulting in improved application properties. This product is highly compatible with indoor paints and has a positive influence on wetting and leveling properties.

VINNAPAS® 561 ED is a low Tg polymer dispersion based on vinyl acetate and ethylene. It exhibits excellent elongation, flexibility, and water resistance, making it ideal for numerous construction applications. VINNAPAS® 561 ED exhibits high filler loading capabilities and is compatible with both fully and partially hydrolyzed polyvinyl alcohols, as well as other synthetic latex polymer dispersions (such as styrene/acrylic and pure acrylic dispersions).

VINNOL® H 15/45 M Special is a specialized carboxylate-containing terpolymer composed of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 0.5 wt.% dicarboxylic acid. Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic and physically drying binder creates a film as the solvent within the formulation evaporates.

GENIOSIL® GF 80 is an epoxy functional alkoxysilane. When used as a coupling agent in mineral-filled plastics, it enhances filler dispersibility, reduces sedimentation tendency, and significantly lowers the resin's viscosity. Moreover, it allows for higher filler loading and provides notable improvements in water (vapor) resistance, as well as resistance to acids and bases. In the realm of adhesives and sealants, incorporating GENIOSIL® GF 80 enhances adhesion to the substrate and improves mechanical properties like flexural strength, tensile strength, and modulus of elasticity.

GENIOSIL® GF 96 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This product finds applications in various industries, particularly in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 96 offers excellent adhesive properties and is well-suited for use in the construction and home improvement sectors.

VINNAPAS® 547 ED (NJG) is a versatile polymer dispersion with high water resistance and excellent compatibility. This product is a dispersion based on vinyl acetate and ethylene. VINNAPAS® 547 ED (NJG) is produced without using formaldehyde donors and without adding plasticizers or organic solvents.

SILRES® BS 1001 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 1001 serve as high-quality, general-purpose water repellents for impregnating and priming mineral surfaces. SILRES® BS 1001 can be combined with polymer-based primers for substrate consolidation.

GENIOSIL® GF 93 is an alkoxysilane with an amino-functional group. It is a clear, colorless liquid with a characteristic amine odor. This versatile product finds applications in various industries. It is commonly used in building and construction adhesives, DIY projects, flooring installation, interior paints and coatings, and waterproofing membranes. GENIOSIL® GF 93 offers excellent adhesion and bonding properties, making it an ideal choice for a wide range of applications in the construction and home improvement sectors.

VINNOL® H 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It is primarily employed as a binder in surface coating compounds and printing inks. VINNOL® H 15/45 M functions as a thermoplastic, physically drying binder that undergoes film formation as the solvent within the formulation evaporates.

SILRES® BS 1310 is a solvent-free, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It is an additive used in the production of aqueous masonry coatings and aqueous primers to enhance water repellency and resistance. Additionally, it improves the processability and antiblocking characteristics of the aqueous coatings.

SILRES® BS 1306 is a solventless, water-thinnable emulsion of polysiloxane modified with functional silicone resin. It can also be used as a water-repellent primer, in which case it should be diluted with water at a ratio of 1 part SILRES® BS 1306 to 9 parts water. If the primer is required to strengthen the substrate, we recommend adding a polymer dispersion in hydrosol form.

SILRES® BS 4004 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Dilute solutions of SILRES® BS 4004 serve as high-quality general-purpose water repellents for hydrophobic impregnation and priming of mineral surfaces. Treated mineral substrates exhibit an excellent beading effect. Additionally, SILRES® BS 4004 can be used for mass hydrophobation of non-load-bearing concrete products.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

WACKER® Silicate S100 is a ready-to-use ethyl silicate binder with a flash point above 21°C. It is primarily used for formulating single-pack ethyl silicate zinc-rich primers, which are commonly used as anti-corrosive coatings. This product is particularly suitable for applications in marine, protective, and industrial coatings.

SILRES® BS 3003 is a water-thinnable, solventless emulsion based on a mixture of silane and siloxane. Diluted solutions of SILRES® BS 3003 serve as high-quality general-purpose water repellents for impregnating and priming mineral surfaces. It can also be used for the mass treatment of non-load-bearing concrete products and as a post-hydrophobation agent for fiber cement products like fiber cement boards.

VINNAPAS® 536 ED is a versatile polymer dispersion based on vinyl acetate and ethylene with a high solid content. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content is below 1000 ppm. The dispersion is characterized by high bonding strength combined with increased flexural strength and good compatibility with inorganic fillers like CaCO3.

WACKER® Silicate MKS is an ethyl silicate binder suitable for the formulation of one-pack ethyl silicate zinc-rich primers. These primers are excellent anti-corrosive coatings. WACKER® Silicate MKS is a binder with outstanding anti-setting properties. Paints formulated with it are easy to stir up, even if they have been stored for a long time.

VINNOL® E 15/45 M is a carboxylate-containing terpolymer consisting of approximately 84 wt.% vinyl chloride (VC), 15 wt.% vinyl acetate (VAc), and 1 wt.% dicarboxylic acid. It functions primarily as a binder in surface coating compounds and printing inks. This thermoplastic binder undergoes a physically drying process, resulting in the formation of a film as the solvent within the formulation evaporates.

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

Dynasylan® DAMO is a versatile diamino-functional silane that enhances adhesion and modifies surfaces. Acting as an adhesion promoter and surface modifier, it bridges the gap between inorganic materials and organic polymers like polyamides, PBT, PVC, and more. This silane boasts features like corrosion resistance, good impact strength, and improved mechanical properties. It's your solution for cables, pipes, and beyond. Elevate your materials with Dynasylan® DAMO.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

Dynasylan® AMEO is a bifunctional silane, encompassing a reactive primary amino group and hydrolyzable ethoxysilyl groups. Its dual reactivity enables Dynasylan® AMEO to establish chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It serves as an adhesion promoter, crosslinker, and surface modifier.

Dynasylan® HYDROSIL 2926 is a versatile organosilane solution designed to enhance various applications. This water-based product acts as a surface modifier, crosslinking agent, and adhesion promoter. It effectively works with polymers like Polyethylenes (PE), Polypropylenes (PP), Epoxies (EP), and more. Meeting regulatory standards such as REACH Exempt, this liquid solution is available in cans and drums. Trust in its high performance and compatibility for improved results.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

Dynasylan® HYDROSIL 1153 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1153 takes your materials to the next level.

Dynasylan® 1124 is a secondary aminofunctional methoxysilane with symmetric silicon atoms, serves as an adhesion promoter between inorganic materials (like glass, metals, fillers) and organic polymers (thermosets, thermoplastics, elastomers). This versatile compound also functions as a surface modifier and enables chemical substance modification. Available as a colorless to yellow liquid with an amine-like odor, Dynasylan® 1124 readily dissolves in alcohols, aliphatic, or aromatic hydrocarbons.