Products in Paints & Coatings: Stains

DeCAL 1005 is a hydrophobically modified synthetic alkali-swellable, solvent-free, and liquid thickener for waterborne systems. It is highly effective in increasing low shear viscosities as well as yield values. As a result, levels of use can be significantly reduced when replacing the usual low shear effective thickeners with DeCAL 1005.

Syntran® 6302 is a water-based, cationic acrylic copolymer solution that is recommended for stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. It is especially recommended for wood primers where sandability is required. Syntran® 6302 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

Syntran® 6303 is a water-based, cationic acrylic copolymer solution that is recommended for stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. It is especially recommended for wood primers where sandability is required. Syntran® 6303 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

Crys-Talc® 4H-4HC is a high-purity, high-brightness, platy, medium-sized talc used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Crys-Talc® 4H is used in solid-color and semitransparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics. Crys-Talc® 4H has a platy, hydrophobic structure used in  architectural and industrial primers to improve barrier properties which impart corrosion resistance and stain blocking  ability.

Syntran® 6301 is a water-based, cationic acrylic copolymer solution that is recommended for low-VOC stain-blocking paints and primers. It has excellent performance in blocking wood and cork extractives, nicotine, graffiti, soot, and water stains. Syntran® 6301 is recommended for interior use and also for the formulation of coatings with excellent adhesion properties on critical substrates, such as glass, ceramic tiles, zinc, aged alkyd paints, etc.

DCL 1419 Quinacridone Violet, PV.19 is a bright, blue-shaded quinacridone with a similar shade to thioindigo red, and it has excellent overall properties. This pigment is FDA-approved (Section 178.3297) and is recommended for use in inks, high-grade industrial paints, implement enamels, agricultural equipment, and powder coating applications.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Mistron® 353 is a high-purity microcrystalline talc. Mistron® 353 is used in interior and exterior coating, adhesive, and sealant formulations to reduce hard settling, improve sag resistance, and maximize prime pigment extension. Mistron® 353 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Mistron® 403 is a high-purity, platy, microcrystalline talc. In architectural and industrial primers, it provides barrier properties to improve corrosion resistance and stain-blocking ability. Mistron® 403 also prevents tannin bleed and improves gloss uniformity in solid-color and semi-transparent stains. In sealant formulations, Mistron® 403 enhances film strength and flexibility.

Nicron® 674 is an ultra-fine, high-purity microcrystalline talc. It is insoluble in mineral acids, hydrophobic, and non-abrasive to compounding and processing equipment. Nicron® 674 is used in a wide variety of applications, including interior/exterior coatings, color concentrates, adhesives, sealants, and thermoplastic polymers.

ASCOTRAN® H30 is a bio-based ultra-performing liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially on substrates very sensitive to flash rust (welding, sand-blasted...) during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCOTRAN® H18 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals, especially in waterborne 2K systems, during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCOTRAN® H10 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products;

ASCOTRAN® H14 is a bio-based liquid corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCOTRAN® HPB is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

ASCOTRAN® AL4 is a bio-based liquid, nitrite-free corrosion inhibitor preventing flash rust in all types of waterborne wet coatings. It is mainly used in waterborne coatings to eliminate flash-rusting on ferrous and non-ferrous metals during drying of the coatings, and as a corrosion inhibitor for metal packaging protection containing waterborne products.

OMACIDE™ IPBC 40 Industrial Fungicide is a pungent aromatic, pale yellow to amber-colored liquid broad spectrum fungicide additive. It is used in architectural coatings, textiles, construction applications such as paints, stains, adhesives, caulks, and sealants, as well as plastic product applications to prevent dry film fungal growth. OMACIDE™ IPBC 40 Industrial Fungicide is also a very effective additive for controlling fungal growth in aqueous-based fluids such as inks and metalworking fluids.

OMACIDE™ IPBC 30 Fungicide is a broad spectrum liquid fungicide based on the widely used fungicide active, 3-iodopropynyl butylcarbamate (IPBC). It imparts dry film protection against fungal growth when formulated in exterior paints and coatings, wood stains, adhesives, caulks, sealants, paper coatings, textiles, and plastics. OMACIDE™ IPBC 30 Fungicide also provides excellent fungal control when used in inks and metalworking fluid systems.

OMACIDETM™ IPBC 20 TX Fungicide is a highly effective broad spectrum fungicide suitable for the preservation of a variety of solvent-based industrial products, including architectural coatings, wood stains and construction materials, against spoilage from fungi & yeasts. The active agent is 3-iodo 2-propynyl-N-butylcarbamate (IPBC) in a solvent package of an ester alcohol and glycol ether.

Polyfluo® 150XF is a unique, high performance composite of polyethylene and PTFE for surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface High slip polyethylene provides excellent surface lubricity PTFE dramatically enhances abrasion resistance Extra fine particle size provides excellent gloss retention and film clarity

Propyltex® 230S are Medium particle size grades of micronized polypropylene for adding consistent texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a medium texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not Iower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Polyfluo® 190S is a unique, high performance composite of low density polyethylene and PTFE for maximum abrasion and burnish resistance with superior surface durability.Features and Benefits High performance product for improving surface abrasion resistance and film toughness Synergistic wax combination that enhances PTFE mobility to the coating surface Low density polyethylene provides superior surface toughness, durability and mar resistance PTFE dramatically enhances abrasion resistance, antiblocking and film hardness Conforms to (EU) 2017/1000

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

Micropro 400 is Modified high melt point hybrid polypropylene wax for consistent gloss control with surface slip, mar and abrasion resistanceFeatures and Benefits Improves mar, scratch and metal marking resistance. Effective gloss control agent with good burnish resistance in low or medium gloss finishes. Provides antiblocking properties. Low density will keep silica matting additives in suspension. Easy to disperse in both polar and non-polar systems.

PropylMatte 31 is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

AquaBead® 525E is an anionic paraffin/carnauba wax emulsion ideal for water repellency and weather/moisture resistanceFeatures and Benefits Provides excellent initial water beading and long term water repellency. Imparts weather and moisture resistance. Gives surface slip and antiblocking properties. Wax emulsion particle does not reduce gloss or clarity.

Propyltex® 325S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grade available for maximum texture control For a finer texture, try PropylMatte 31

PropylMatte 450 is Finely micronized polypropylene for consistent matting and gloss control in paints, inks and industrial coatings.Features and Benefits Provides uniform gloss reduction with good clarity, a smoother surface feel, and no viscosity effects when compared to silica additives Tough, high molecular weight polymer imparts superior burnish and abrasion resistance vs. silica Does not lower COF; ideal for non-skid surfaces In powder coatings, lowers gloss, reduces slip, and functions as a highly effective degassing agent vs. benzoin Eliminates powder coating pinholes and improves surface adhesion when overcoating or using silicone sealants Adds texture in low bake (Low E) powder coatings

Propyltex® 270S is Micronized polypropylene for reducing gloss and adding consistent surface texture and structure to a wide variety of paints and coatings.Features and Benefits Provides gloss reduction with improved burnish resistance vs. silica Adds a mild texture effect to the coating surface Tough, high molecular weight polypropylene gives good durability Does not lower COF; ideal for non-skid surfaces Narrow cut mean particle size grades available for maximum texture control Adds texture in low bake (Low E) powder coatings

Synfluo 170VFA cost effective combination of micronized Fischer-Tropsch wax and PTFE for surface lubricity and scratch resistance.Features and Benefits Fischer-Tropsch wax provides slip, scratch and rub resistance PTFE provides lubricity, abrasion resistance and antiblocking Synergistic wax combination that enhances PTFE mobility to the coating surface

MicroTouch 800XF is Highly resilient spherical polyurethane beads that can modify the tactile properties of formulated coatings and inks while improving burnish, scratch and mar resistance.Features and Benefits Virtually indestructible elastic particles that distort when disturbed by a physical force and then return to their original spherical shape when the force is removed. Provide different tactile effects ranging from satiny smooth to rubbery to leathery in properly formulated coatings Different particle sizes available to create a unique surface "touch" Improves burnish and abrasion resistance Effective gloss reduction

Texicryl® 13-313 is an alkali swellable thickener crafted specifically for water-based formulations. This product excels in efficiently modifying viscosities at low shear rates to prevent both settling and sagging.

Alnor Oil Company Chinese Tung Oil is a product containing industrial additives designed for use as a resin in various markets, including paints and coatings. Its applications span building and construction, including concrete coatings and stains. The applicable processes include linoleum manufacturing, floor covering manufacturing, and alkyd resin manufacturing.

PropylMatte 31SA is Finely micronized PTFE modified polypropylene for consistent matting and gloss control with surface slip, abrasion and burnish resistance.Features and Benefits Efficient gloss reduction from satin to matte finish Polypropylene improves burnish resistance vs. inorganic flattening agents PTFE provides additional abrasion resistance, enhanced lubricity and surface slip Density optimized for maximum stability in water based and energy curable systems Adds texture in low bake (Low E) powder coatings

Vinavil 7829 is a self cross-linking acrylic dispersion designed for exterior wood coating for joinery applications such as window and door frames. Vinavil 7829 is free from alkylphenol ethoxylates (APEO-free), formaldehyde.

Micro Powders Inc MP-28XF is Higher molecular weight grade of Fischer-Tropsch wax for improved slip, scratch and rub resistance.Features and Benefits Imparts a high degree of lubricity and slip with rub and mar resistance Processed to a fine and narrow particle size distribution Excellent gloss retention Provides antiblocking properties Biodegradable to OECD 302C test standard Not a microplastic per ECHA definitions