products in Other Paints & Coatings Applications: Powder Coating

Mitsubishi Chemical Group Corporation

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol FeaturesAbrasion, heat and water resistanceElectrical insulationWear resistanceProduct HighlightsSignificantly low melt viscosity (melting point: 108°C)Low chroline contentLow water absorption ApplicationsElectrical and electronic applications (EMC, solder resist, PCB)Potting and encapsulation materialsPowder coatings for ship bottomsAdhesivesComposites *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Sapici Spa

POLURENE T 70

POLURENE T70 can be used in combination with tested hydroxylated components for the formulation of 2K non-yellowing topcoats with good resistance to chemical agents. POLURENE T70 can be diluted with esters and aromatic solvents up to 10-15%, without any precipitation process, whereas with aliphatic solvents like white spiritit is recommended not to dilute the product below 30% solid content.

Jubail Chemical Industries

Araldite® GT 7071

Araldite® GT 7071 N is a low melting solid unmodified epoxy resin based on Bisphenol A. with narrow molecular weight distribution. Araldite® GT 7071 N can be added to alkyd/amino stoving enamels to enhance their quality and to powder coatings e.g. to improve their flow.

DOG Chemie

Homogenizers 501

Dog Chemie Homogenizers 501 is aromatic C9 hydrocarbon resins. C9 hydrocarbon resins are versatile in use and widely compatible with various polymers. Major application areas are hot melts, printing inks, paints and solvent based adhesives. Due to their aromatic structure, C9 hydrocarbon resins are more compatible with polar elastomers than a C5 resin.

Munzing

CERETAN® MTZ 9335

CERETAN® MTZ 9335 is a spray micronized Fischer-Tropsch-wax, coated with Zinc.Properties are high matting, no impact on color output, distribution and weather durability, no impact on mechanical properties. Applications as additive for powder coatings.Zinc-compound coated wax, which provides excellent matting at higher curing temperatures starting from 180–230°C, where standard matting agents fail.

Microfill K. Zafranas

Zetatalc EW 10

Zetatalc EW 10 is made of pure lamellar talc. The crystals are macro crystalline in shape and processed in such a way so as to always retain this shape. This filler has an extremely high degree of whiteness and chemical purity. Zetatalc EW 10 renders these unique properties it possesses wherever it is applied

Huber Engineered Materials

Micral® 632

Micral® 632 is a mechanically produced ATH product designed for plastic and rubber applications requiring a fine particle size. The high surface area of Micral 632 provides a low cost approach to flame retardance and smoke suppression in applications such as urethane foams, vinyl, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XPLE.

Deuteron

Deuteron SF 707

Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level.Deuteron SF 707 is suitable for systems where smoothness and pleasant haptic is desired in small dosages. Depending on the complete system Deuteron SF 707 can also be used to improve the mechanical resistance. back

Jubail Chemical Industries

Razeen® SR 5357

Razeen® SR 5357 is a Solid epoxy resin based on bisphenol A and phenol novolac for powder coating.

A&C Catalysts

TECHNIREZ® RME-912

TECHNIREZ® RME-912 is a solid adduct of a “4” type solid diglycidyl ether of bisphenol-A epoxy resin and a carboxyl terminated butadiene acrylonitrile elastomer. RME-912 is epoxy functional and therefore compatible with all epoxy resins. The product offers low temperature melting and high elastomer content. RME-912 is easily dissolved in a variety of solvents such as MEK, toluene and xylene. Due to its high elastomeric content, significant improvements in impact resistance, thermal shock resistance and fatigue resistance may be seen when used alone or in combination with other epoxy resins. The product is offered as a coarse pellet or as a fine ground (180 micron) powder or as superfine 74 micron grade.

JSC SUMYKHIMPROM

JSC SUMYKHIMPROM Titanium Dioxide SUMTITAN R-2061

JSC SUMYKHIMPROM Titanium Dioxide Sumtitan R-2061 is characterized by increased atmospheric resistance, high optic characteristics. Is recommended to produce masterbatch, thermoplastics, high strength PVC for both interior and exterior applications, to produce elastomers, rubber, paper (incl. paraffin and ornamental paper), paper coatings (incl. wallpaper), food packaging, leather, white cement, sealants, adhesives, organosoluble semi-matt paints for interior and exterior operations, beddings, putties, silicate paints, finishing mortars (incl. cement mortars), polymer coatings, powder coatings, epoxy coatings, rubber.

TOR Minerals

HALTEX® 315

HALTEX® 315 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Deuteron

Deuteron MK-F

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron

Deuteron MK-F6

Deuteron MK-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Deuteron MK-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Deuteron MK only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Deuteron

Deuteron MM 684

Deuteron MM 684 is suited for all common coil-coating systems. This includes its utilization in conventional high-quality stove enamels. In addition, Deuteron MM 684 can be used in a variety of applications, preferably in pigmented paints and lacquers.Deuteron MM 684 is a mixture of finest-ground (micronized) materials that is well suited as a matting agent in paints and lacquers. Apart from the good matting effect, special importance is also attached to a low binder requirement in order not to affect the flow properties of the matted system considerably. This leads to a good formulation margin in the processing.Deuteron MM 684 does not contain any wax additives, thus coating layers equipped with it are not expected to cause any adhesion problems in multi-layer systems or repair coatings. back

Hoffmann Mineral

SILLITIN Z 86

SILLITIN Z 86 has a fine particle size distribution and good color neutrality.

Swada

Swada T Astral Pink 1

T Astral Pink 1 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

A&C Catalysts

Resicure® 2MI

Resicure® 2MI is commonly used as a sole curing agent or as a dicy and anhydride cure accelerator in epoxy resin based formulations. Typical loading level as a sole curing agent is about 3-5 phr and as a dicy and anhydride cure accelerator is about 0.5 – 1.5 phr. Jet milled grade of Resicure imidazole is available as Resicure 2MI-J.

TOR Minerals

HALTEX® 304

HALTEX® 304 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Eduard Merkle

Juraperle 130

Juraperle 130 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 130 is a solid powder in appearance with a characteristic odor and oil absorption of 10 g/100g.

Nissan Chemical America Corporation

TEPIC® S

TEPIC® S Tris (2,3-Epoxy propyl) Isocyanurate, is a unique symmetrical triazine contains tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Munzing

CERETAN® MAB 7055

CERETAN® MAB 7055 is a micronized Ethylen-bis-Stearamid-wax [EBS], coated with Benzoin. This product have application in Additive for powder coatings.These micronized amide waxes show very good performances with all pigment and plastic applications, especially PS and ABS.Amide wax coated with Benzoin, this product enables you to reduce the amount of Benzoin contained in your Powder Coating and provides excellent flow and leveling by reduced yellowing.

Radiant Color

Radglo® GFS-18

Radglo® GFS-18 is UV Blue in color with daylight and ultra-violet responsive fluorescent soluble toner for solvent-based formulations. A dyed/pigmented thermoplastic glycol-uril- sulphonamide- paraformaldehyde resin.

KS Chemical

Rheoflow® PLP-100

Rheoflow PLP-100 is designed to achieve multi-functional performances in the final coatings, as well as offering sustainable solution and displaying high compatibility with different solvent & water-borne systems.

A&C Catalysts

Technicure® TDU-200M

Technicure® TDU-200M is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

Lona Industries

Lonocyanine Beta Blue GS 212

Lonocyanine Beta Blue GS 212 is a Copper Phthalocyanine Pigments.

Sterling Colour

Sterling Colour 810 Fire Red 15

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Ceramisphere

INHIBISPHERES® ZS

INHIBISPHERES® ZS is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® ZS is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® ZS (ISZS) releases quickly to slow corrosion in the scribe (250 hours).

Ceramisphere

INHIBISPHERES® M

INHIBISPHERES® M is submicron ceramic particles that can provide specific functionalities to classic coating formulations. INHIBISPHERES® M is porous silica particles containing encapsulated corrosion inhibitors. INHIBISPHERES® M is metal-free. Low levels of INHIBISPHERES® M give superior performance when compared to traditional corrosion inhibitors on steel.

Huber Engineered Materials

Micral® AM550

Micral® AM550 is an ATH ultra fine product designed for thermoplastics, thermoset composites, latex coatings and rubber applications requiring a fine particle size coupled with a narrow particle size distribution. The narrow particle size distribution imparts a low surface area to Micral AM550 which can be important for formulation stability. Micral AM550 provides an economical approach to flame retardant and smoke suppression in applications such as urethane foam, unsaturated polyester resin, PVC, SBR belting, EPDM, EPR, adhesives, coatings, ABS, polyolefins and XLPE.

A&C Catalysts

Technicure® MDU-11

Technicure® MDU-11M, [4,4’- (methylene bis (phenyl dimethyl)] urea, is a substituted urea. It is used as a dicyandiamide (DICY) accelerator in one-component epoxy resin based formulations. Typically the product is used with epoxy resin and dicyandiamide between 1-3 phr. The loading level of an accelerator will provide balance of low temperature reactivity and formulation shelf stability.

Nissan Chemical America Corporation

TEPIC® G

TEPIC® G is a unique symmetrical triazine is a tri-functional epoxy compound which entirely different from conventional bisphenol type epoxy resin. TEPIC is well suited for electronic coatings and plays a crucial role as the the cross-linker integrity of solder mask, in transparency of LEDs, and in outdoor durability of powder coating.

Deuteron

Pergopak M3

Pergopak-matting agents are suitable as exclusive matting agents for water-borne, solvent-borne and solvent-free systems, air-drying as well as stoving. They can also be used in printing inks, wood lacquers, UV-curing coatings, coil-coatings, lacquers on foils, aqueous wood- and furniture varnishes.The finer types are suitable where particularly thin dry films are applied or where very smooth surfaces have to be realized. The combination with inorganic matting agents is possible and leads to improved mechanical resistances. Scratch resistance and resistance against polishing will be increased.Deuteron MK matting agents are micro-ground resp. micronized powders. The fineness enables Pergopak M-products to be used in a wide field of applications for producing satin-flat and satin-gloss coatings. The small binder demand of Pergopak M only leads to a nonessential viscosity influence, which is important for UV-curing lacquers. Deuteron MK is resistant against solvents and chemicals which are customary in the paint industry. These products can also be used in exterior applications. Adjustments to specific requirements can easily be made due to the different particle sizes, available. back

Microfill K. Zafranas

Zetafil cst 3

Zetafil CST 3 is described on a very white, pure crystalline CaCO3. Zetafil CST 3 is coated by an organic agent which transforms the surface of the inorganic particles to an organic one, thus achieving full compatibility of the filler to an organic media. Due to its special particle size distribution, Zetafil CST3 is easily dispersed and can increase the % of fillers in the compound and coatings. Zetafil cst 3’s high brightness value assists the reduction of TiO2 in white compounds or coatings.

TOR Minerals

HALTEX® 310

HALTEX® 310 is an economical, non-toxic, flame retardant & smoke suppressant filler produced in the at TOR Minerals- US for supply to the North American market. HALTEX features tightly controlled particle sizing to meet specific application performance requirements. Quality is suitable for a broad range of uses including: Electrical Components, Sheet Molding Compound (SMC), Bulk Molding Compound (BMC), Adhesives & Sealants, Roof Coatings, Foam Insulation and Rubber Mining Belts.

Shamrock Technologies Inc.

Shamrock Technologies Inc. S-400-N1

S-400-N1 is micronized EBS (ethylene bisstearamide) wax powder showing melting peaks ranging from 99 – 147°C. Shamrock’s product line of micronized waxes provides rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.