Other Paints & Coatings Applications

Sasol

ISOFOL 28

ISOFOL 28 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-dodecyclhexandecanol and is also referred to as C28 Guerbet alcohol.

AdvanSix

EZ-Blox®

EZ-Blox® optimizes the performance of alkyd-based paint and coating systems by preventing surface skin formation caused by contact with atmospheric oxygen. EZ-Blox® is a breakthrough product that offers a safe, cost-effective replacement for MEKO, with equivalent efficacy and compatibility. With REACH-certification and a distinct, low-toxicity profile, EZ-Blox® is ideal for paint and coatings producers looking to reformulate high-performance alkyd-based systems after the ECHA's March 1, 2022 reclassification and labeling requirements.

Mitsubishi Chemical Group

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jERTM YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX8000D

jER™ YX8000D is a hydrogenated bisphenol A-type liquid epoxy resin with significantly lower chlorine impurity levels than other commercially available products. It can be used for wide variety of optical adhesives and encapsulants.FeaturesExcellent adhesionFast cure timeLow chlorine contentExcellent transparencyLED-curableUV-curableApplicationsConsumer appliances and electronicsElectrical and electronic displaysElectronics adhesivesPotting compoundsSemiconductor manufacturingLEDs*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

LIPOXOL 300 MED

A clear liquid polymer soluble in water, LIPOXOL 300 MED is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ISOFOL 24

ISOFOL 24 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-decyl-1-tetradecanol and is also referred to as C24 Guerbet alcohol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

Sasol BHT

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Mitsubishi Chemical Group

jER™ YL980

jER™ YL980 is is a Bisphenol A-type liquid epoxy resin with very low chlorine content. It can be used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).BenefitsExcellent adhesivenessMaintains high electrical reliability FeaturesChemical, heat and water resistantElectrical insulating propertiesSignificantly low chlorine content (below 500 ppm)ApplicationsElectrical and electronic applications Potting & encapsulation materialsAdhesives*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol   Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption  Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX8040

jER™ YX8040 is a hydrogenated bisphenol A-type solid epoxy resin, with high molecular weight. It can be used for optical materials such as LED encapsulants and adhesives for displays.FeaturesHigh purityTransparencyLED-curableUV-curable *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

ISOFOL 16

ISOFOL 16 is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-hexyl-1-decanol and is also referred to as C16 Guerbet alcohol. It is used in personal care. ISOFOL 16 is a medium spreading emollient, basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/90

MARLIPAL O13/90 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ISOFOL 32

ISOFOL 32 Alcohol is a primary, saturated alcohol with defined branching of the carbon chain. It can be chemically described as 2-tetradecyl-1-octadecanol and is also referred to as C32 Guerbet alcohol. It is used in personal care as consistency regulator and rich emollient basic material for the production of emollient esters. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

ISOCARB 12

ISOCARB 12 is a primary, saturated carboxylic acid with defined branching of the carbon chain. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DKSH

Luna-cure PACM-20

Luna-cure PACM is a cycloaliphatic diamine. Luna-cure PACM is mainly used as a hardener for epoxies. The curing of epoxy resins at high temperatures leads to excellent mechanical properties and good resistance against alkalis, acids, hydrocarbon solvents and water. This product is available in Europe, Asia and North America.

Sasol

MARLIPAL O 13/109

MARLIPAL O13/109 is based on a primary, multibranched C13 alcohol with approx. 10 moles ethylene oxide. The product contains approx. 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Disamtex Ind, e Com. de Produtos Quimicos

DISACOAT ALK 300

DISACOAT ALK 300 is a neutralizing agent for paints, co-dispersant auxiliary – it reduces the dispersant demand and substitute of the ammonium hydroxide in paints of low scent.

Sasol

MARLIPAL 24/20

MARLIPAL 24/20 is based on a primary linear C12-C14 fatty alcohol with approx. 2 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/20 is also available as RSPO-MB grade. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

TRIDAC ISO-6

TRIDAC ISO-6 is a fatty alcohol polyethyleneglycol ether, based on MARLIPAL 13 and ethylene oxide (about 6 moles). It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/100

Marlipal O 13/100 is a oxoalcohol C 13 + 10 mol of ethylene oxide. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/40

MARLIPAL O13/40 is based on a primary, multibranched C13 alcohol with approx. 4 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/30

MARLIPAL O13/30 is based on a primary, multibranched C13 alcohol with approx. 3 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Vink Chemicals

parmetol® A 26 N

parmetol® A 26 N is a preservative for technical products Stabilised aqueous preparation based on chloromethyl-/ methylisothiazolone (CMI/ MI)and reaction product of ethylene glycol, urea and Paraform Suitable for preservation

Mitsubishi Chemical Group

jER™ YL983U

jER™ YL983U is a Bisphenol F-type liquid epoxy resin with very low chlorine content and low viscosity. It is used for electrical and electronic applications (Sealant, casting agent, adhesives, and so on).   Benefits Excellent adhesiveness Good elastic recovery  Features Chemical, heat and water resistant Electrical insulating properties Significantly low chlorine content (below 500 ppm) Low viscosity Applications Electrical and electronic applications  Potting & encapsulation materials Adhesives   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

AdvanSix

Nadone® HDR® Cyclohexanone

Nadone® HDR® Cyclohexanone is ideal in high purity applications. Key benefits include uniform evaporation, minimal moisture content and a low toxicity, ecotoxicity and volatile organic compound (VOC) profile. AdvanSix Nadone® HDR® Cyclohexanone is sold to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications. High Purity Nadone® HDR® Cyclohexanone is used in the Adhesives & Sealants market as an intermediate in the production of construction adhesives; DIY and Consumer sport and fashion applications; textile and footware adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural, commercial and residential pest control, and industrial weed and vegetation control. High Purity Nadone® HDR® Cyclohexanone is used in the Automotive and Transportation market as an intermediate in the production of coatings and finishes. High Purity Nadone® HDR® Cyclohexanone is used in the Building and Construction market as an intermediate in pipes and plumbing applications, and construction chemical adhesives. High Purity Nadone® HDR® Cyclohexanone is used in the Consumer Goods market as an intermediate in the production of appliances and electronics. High Purity Nadone® HDR® Cyclohexanone is used in the Electrical and Electronics market in the production of devices and assemblies for automotive and consumer electronics, packaging and assembly adhesives, printed circuit boards, semiconducting manufacturing applications. High Purity Nadone® HDR® Cyclohexanone is used in the Food and Nutrition market in processing and packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Healthcare and Pharma market in tubing and fluid handling and medical flexible packaging applications. High Purity Nadone® HDR® Cyclohexanone is used in the Paints and Coatings market in aerospace coatings, industrial and metal coatings and can coating applications. High Purity Nadone® HDR® Cyclohexanone is used in the Printing & Packaging market as a packaging can coatings, rigid packaging caps, closures, containers and tubs.

Sasol

MARLIPAL O 13/99

MARLIPAL O13/99 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. The product contains 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLINAT 242/28

MARLINAT 242/28 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/80

MARLIPAL O13/80 is based on a primary, multibranched C13 alcohol with approx. 8 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

INVISTA

Dytek® HMD

DYTEK® HMD (hexamethylene diamine) is a highly pure (>99.9%) aliphatic diamine. DYTEK® HMD is used in the production of Nylon polymers, isocyanates, polyamide resins and adhesives. Other applications include water treatment, UV stabilizers, scale and corrosion inhibitors, and petroleum additives. This product is available as an anhydrous that is solid at room temperature and can be shipped as a warm liquid or diluted aqueous solution.

Munzing

EDAPLAN® 490

EDAPLAN 490 is a VOC-free wetting agent and dispersant for organic and inorganic pigments as well as carbon blacks in aqueous media. It is ideal for the manufacture of flood/float-free aqueous coatings systems (air dry and force dry, 2Ksystems) as well as for the manufacture of aqueous resin-free pigment concentrates. EDAPLAN 490 stabilizes pigment dispersions and reduces the mill-base viscosity. Gloss, colour strength and hiding power are improved and reflocculation is prevented.

Sasol

EMULDAC AS-25

EMULDAC AS-25 is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for hair-dyeing formulations. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

MARLIPAL O 13/50

MARLIPAL O13/50 is based on a primary, multibranched C13 alcohol with approx. 5 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Momentive Performance Materials

Silquest™ A-1100

Silquest™ A-1100 silane coupling agent, gamma- Aminopropyltriethoxysilane, a versatile amino-functional coupling agent may be an excellent candidate for use in a range of broad applications to provide superior bonding between inorganic substrates and organic polymers.

Sasol

GALENOL 1618 AE

Galenol 1618 AE is a Special Compound belonging to Sasol's Other Nonionics and Blends range of products. GALENOL 1618 AE is a biodegradable, multipurpose emulsifying alcohol derived from vegetable cetearyl alcohol. This non-ionic self-emulsifying O/W base provides emulsifying and stabilizing properties to lotions, creams, hair colorant creams, developer emulsions, hair relaxers, hair conditioners and depilatory creams, stable over a wide pH range and in the presence of high electrolyte levels. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Kolon Industries

SUKOREZ® SU-640

SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.

Sasol

TRIDAC ISO-40

TRIDAC ISO-40 is a fatty alcohol polyethyleneglycol ether, based on MARLIPAL 13 and ethylene oxide (about 40 moles). It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.