Film & Foil Coatings

INVISTA

Dytek® BHMT

DYTEK® BHMT (bis-hexamethylene triamine) is a long chain triamine that is used as a binder in asphalt, as a phosphonate scavenger and flocculant in oil & gas applications, and as a hardener in epoxy coating and adhesive applications.

AdvanSix

AdvanSix Acetone NF Grade

AdvanSix High Purity Acetone NF Grade meets or exceeds certification requirements of the National Formulary. It is produced to the highest standards for key industries, including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. Offering low impurities, low Benzene, and low water content, AdvanSix High Purity Acetone NF grade can be used as an intermediate in the production of:Building and ConstructionConstruction and repair adhesives, exterior insulation and finishing systems, glazing and window elements, pipe and plumbing cement systems, and roofing sealants and caulks.Agriculture & Feed Agricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAutomotive aftermarket parts, exterior and body parts, interior parts and lighting, and coatings for aerospace, automotive OEM, marine, rail, mass transit, off-road and commercial vehicle applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, packaging and assembly adhesives and sealants, printed circuit boards, and other semiconductor manufacturing applications.Healthcare & PharmaOral and dental drug delivery solutions, tubing and fluid handling equipment, excipients, coatings and processing aids and nail care applications.Paints & CoatingsArchitectural coatings, decorative paints, wood coatings and finishes, flooring and surface coatings, infrastructure coatings and markings, and packaging coatings for film and foil, overprint varnishes, primers and lacquers, and other aerosol coating applications.

allnex

EBECRYL® 303

EBECRYL 303 is a polymeric resin diluted 45% with the monomer 1,6-hexanediol diacrylate (HDDA)(1). This material is designed to be used alone or in combination with other UV/EB curable oligomers to provide improved adhesion of inks and coatings on plastic substrates.

allnex

SETAQUA® 6756

SETAQUA 6756 is a self-crosslinking, surfactant free acrylic copolymer emulsion that offers excellent hardness, fast drying and good sandability. The product is highly durable and has exceptional chemical resistance. Film properties of SETAQUA 6756 are further enhanced by the resin’s fine particle size. This serves two functions: 1) it maximizes film clarity and 2) improves film formation for better chemical and solvent resistance. SETAQUA 6756 has excellent flow and leveling properties, approaching a solvent borne product

INVISTA

Dytek® BHMT-HP

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

AdvanSix

AdvanSix Acetone Low Water Grade

AdvanSix High Purity Acetone not only has minimum impurities, but also contains low benzene, and low water. It is produced to the highest standard for key industry segments.Grades of AdvanSix Acetone are commercially available, meeting high purity NF and ACS certification requirements to customers around the world and across industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives, Paints & Coatings, Electronics, and Pharmaceutical applications.High Purity Acetone is used in Building and Construction applications as an intermediate in the production of construction adhesives; DIY and Consumer applications as repair adhesives; As a building envelope material intermediate in the production of architectural coatings, Exterior insulation and finishing systems, and glazing and window elements; Decorative paints and coatings, pipes and plumbing cement systems; Construction chemical uses in adhesives; Acetone is used as an intermediate in the flooring and surface segment as floor coatings; Infrastructure coatings and markings; Roofing sealants and caulks. High Purity Acetone is used in the Agriculture & Feed markets as an intermediate in the production of agricultural pest control, and industrial weed and vegetation control. High Purity Acetone is used in the Automotive and Transportation market as an intermediate in the production of aftermarket parts, exterior and body parts, interior parts and lighting; as a coating for aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings.High Purity Acetone is used in Electrical & Electronic markets as an intermediate in the production of devices and assemblies for automotive and consumer electronics, Packaging and assembly adhesives and sealants; Printed Circuit Boards and other semiconductor manufacturing applications. High Purity Acetone is used in the Healthcare & Pharma markets as an oral and dental drug delivery solution and as an intermediate in tubing and fluid handling. NF Acetone is extensively used in API pharmaceutical manufacturing, as an excipient and coating, and processing aid. High Purity Acetone is used in Home and Personal Care markets in nail care applications.High Purity Acetone is used in the Paints & Coatings market in the automotive and transportation segment as an intermediate in aerospace, automotive OEM, marine, rail, mass transit, off road and commercial vehicle coatings; High purity Acetone is used in architectural, decorative, flooring, infrastructure, roads, and paving, wood coatings and finishes applications. Industrial coating applications include agricultural and construction, appliances and consumer goods, coil coatings, container coatings, furniture coatings, and metal coatings. Packaging coating applications include film and foil, overprint varnishes, primers and lacquers and other aerosol coating applications.

allnex

SYNTHACRYL® 700

SYNTHACRYL® 700 is a glycidyl functionalized polyacrylic resin designed as a matting hardener for carboxylated polyester resins. Coatings based on carboxylic polyesters such as CRYLCOAT® 2441-2 cured with SYNTHACRYL® 700 produce outstandingly smooth, dead matte finishes.

AdvanSix

AdvanSix Technical Acetone

AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

Shamrock Technologies Inc.

AquaFLON® 50-RC

AquaFLON® 50-RC is an aqueous dispersion of submicron polytetrafluoroethylene (PTFE) and is produced to be in compliance with REACH regulatory requirements. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. They are used as additives to provide slip and abrasion resistance.

allnex

PHENODUR® VPM 1150/50EPAC

PHENODUR® VPM 1150/50EPAC is a carboxy modified, nonyellowing co-curing resin. It is used in combination with high molecular weight epoxide resins for stoving interior and exterior can coating systems, foil lacquers, stamping enamels, coil coating primer and chemical resistant primer.

Bomar Specialties LLC

Bomar Oligomers® BR-543

Bomar® BR-543 is a difunctional, aliphatic, polyether urethane acrylate. Films formulated with BR-543 exhibit superior physical and weathering capabilities. BR-543 may also be used to improve the flexibility, weathering, and adhesion characteristics of existing film and foil coatings.

allnex

EBECRYL® 1300

EBECRYL® 1300 is designed as the letdown oligomer for UV thermoformable ink applications, and should be used in conjunction with the pigment grind oligomer, EBECRYL® 8413. EBECRYL® 1300 exhibits good adhesion-promoting properties. Suggested applications for EBECRYL® 1300 include: displays / signage / POP, vending machine panels, packaging, sporting goods, architectural, electronics, appliance nameplates, housing, toys, and novelty items.

Jesons Industries Ltd

BONDEX® PF

BONDEX® PF is water based Acrylic Emulsion designed for low peel adhesion and tack on various substrates. Bondex® PF is recommended for protective Polyethylene Films and exhibits low peel build up on different substrates such as Glass, Stainless Steel, Aluminum Sections, Sunmica etc. It gives peel strength of Max 200 gms/inch at 30ºC after application on PE film at 3 – 5 GSM coating (dry weight).

Shamrock Technologies Inc.

AquaFLON® 50

AquaFLON® 50 is an aqueous dispersion containing submicron PTFE. The AquaFLON® product line is comprised of aqueous dispersions of PTFE or PTFE with wax. These products are designed for stability, pourability and easy incorporation into water-based systems. These additives are used to provide slip and abrasion resistance.

allnex

EBECRYL® 145

EBECRYL® 145 is an Xi-free aliphatic difunctional acrylate of low surface tension. Propoxylated (2) neopentyl glycol diacrylate exhibits good viscosity reducing and solvency characteristics in UV/EB curable formulations, and is an effective monomer for developing low viscosity and low volatility coatings and inks. It is recommended for use in clear & pigmented coatings, over print varnishes, flexo and inkjet inks, and pressure sensitive adhesives.

allnex

EBECRYL® 245

EBECRYL® 245 is an aliphatic urethane diacrylate oligomer diluted with 25% of tripropylene glycol diacrylate. Films of EBECRYL® 245 cured by UV or EB exhibit good flexibility and non-yellowing properties typical of an aliphatic urethane. It is recommended for use in: flexible screen inks and coatings, and coatings on PVC, linoleum and flexible plastics.

Chemiewerk Bad Kostritz

Köstrosol® 1530

Köstrosol® 1530 is an opalescent aqueous dispersion of amorphous silicon dioxide nanoparticles. This middle-size colloidal silica has a negatively charged surface (anionic) which is stabilized by Alkaline (Na+). Köstrosol® 1530 is a pure colloidal silica without any organic additives.

allnex

EBECRYL® 341

EBECRYL® 341 is a silicone-free slip additive master batch. It provides improvement of slip between cured coatings, good inter-coat adhesion and glueability. It s recommended for use in overprint varnish and other radiation curable formulations where good slip properties are required and silicone additives must be avoided.

allnex

VANCRYL® 65

VANCRYL® 65 is a medium molecular weight solid acrylic resin that is soluble in alkaline water solutions. Coatings prepared with VANCRYL® 65 have high gloss, scuff resistance, hardness, and excellent resolubility. It is compatible with most acrylic and maleic resins. It is also effective as a protective colloid in the production of styrene acrylic copolymer emulsions.

allnex

EBECRYL® 305

EBECRYL® 305 has been developed for EB and UV cured flexographic inks. EBECRYL 305 gives excellent adhesion to a wide range of plastic substrates. This material was developed specifically to give good adhesion to polyolefinic substrates in particular, uncoated polypropylene. It can be used as the major component of the pigment concentrate and as a component in the diluent.

C. L. Hauthaway & Sons Inc.

Hauthane L-3415

Hauthane L-3415 is a VOC-free, water-borne, UV-curable polyurethane dispersion. Features: VOC-free, APEO surfactant free. Exccllent chemical and stain resistance. Forms durable, films under ambient or force-dried conditions. Superior abrasion resistance. Fast water-release properties.

Chemceed

Chemceed Dibutyl Sebacate (DBS)

Dibutyl Sebacate (DBS) is used as a plasticizer suited for low temperature and is compatible with PVC, acrylic, nitrile rubber, and celluloses. Due to its non-toxicity and low temp performance DBS is ideal for vinyl food contact films. In addition, Dibutyl Sebacate finds use in coatings, cosmetics, lubricants, and pharmaceuticals.

Polynt Group

Alcure® 4400

Alcure® 4400 is a general purpose, polymeric aliphatic isocyanate hardener based on ipdi and blocked with E-caprolactam. When properly formulated in coating powders, this product will yield a coating with excellent flow and good overall physical properties.

Owensboro Specialty Polymers

SERFENE® 400

SERFENE® 400 is a high barrier, general purpose, polyvinylidene chloride (PVDC) latex with good heat sealability. Materials coated with Serfene 400 have excellent resistance to water vapor, gases, and grease. This latex is recommended for coating paper and primed plastic films. It is also recommended for thermoforming applications. On plastic films, a primer is necessary for adequate adhesion. This high molecular weight PVDC polymer has excellent extensibility even after full crystallization. This property is unique for a high barrier PVDC.

Perstorp AB

Curalite™ Ox

Curalite™Ox (CAS: 3047-32-3) is one of the main components of UV/EB cationic formulations as a reactive diluent. It is used in paint and coatings and printing and packaging applications. Benefits Increases through cure and chemical resistance of the formulation Features Increased reactivity Good diluting power Low viscosity Odor free Non-skin irritating Applications Cationic UV printing inks and overprint varnishes for metal and plastic substrates    

AdvanSix

AdvanSix Acetone ACS Grade

With low impurities, low benzene, and low water content, AdvanSix High Purity Acetone ACS grade is produced to the highest purity product requirements for the Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare industries. It meets or exceeds purity standards set by the American Chemical Society (ACS) for food, drug, or medicinal use and can be used for ACS applications or for general procedures that require stringent quality specifications and a purity of ≥95%, including:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.

allnex

EBECRYL® 3720-TM40

EBECRYL® 3720-TM40 is the bisphenol A epoxy diacrylate diluted 40% by weight with the reactive diluent trimethylolpropane triacrylate (TMPTA) to provide a lower viscosity, easier handling product. It exhibits fast cure response and light color. Films of EBECRYL® 3720-TM40 cured by ultraviolet light (UV) or electron beam (EB) demonstrate high gloss and surface hardness, and excellent chemical resistance.

Shamrock Technologies Inc.

NONSKID 5389

NonSKID 5389 is a micronized, modified polypropylene wax. Shamrock’s NonSKID micropowders provide resistance to sliding forces. NonSKID 5389 is used in air dry, baked, and radiation coatings for aqueous, solvent, UV, and powder systems at 3-5% of total formula weight.

Shamrock Technologies Inc.

HYDROCER 8481

HydroCER 8481 is a stable, non-ionic aqueous synthetic wax emulsion. The HydroCER products are wax emulsions, dispersions, or a combination of these.

DKSH

Luna ESBO A

Luna-ESBO A is an epoxidized soya Oil Acrylate oligomer. Used for UV & EB curable systems, as reactive effective wetter/coupling agent. Key benefits are in UV & EB inks and coatings to improve adhesion and solve delamination issues, to improve flexibility and to bring high functionality. Moderate cure speed, with low odor and skin irritancy. Good compatibility with non polar substrates. This product is available in Europe, Asia and North America.

allnex

EBECRYL® 452

Please use the "ASK THE EXPERT" envelope icon if you wish to request a sample of this product. A low viscosity polyester acrylate oligomer. Gives a fast cure response when formulated with other oligomers and cured via ultraviolet light (UV) or electron beam (EB). Is used for the preparation of high pigment loading pigment pastes produced using a triple roll mill or bead mill. Can be used for grinding all process colors and spot colors.

Shamrock Technologies Inc.

NONSKID 59

NonSKID 59 is a micronized, modified polypropylene wax. Shamrock's NonSKID micropowders provide resistance to sliding forces.

allnex

EBECRYL® 8110

EBECRYL® 8110 is an energy curable specialty resin for easy-to-clean surface effect. Formulated UV/EB curable products containing EBECRYL® 8110 may be applied via direct or reverse roll, offset gravure, metering rod/barcoater, slot die, knife over roll, air knife, curtain, immersion, spray, roll to roll and spin coating methods, as well as screen printing.

allnex

EBECRYL® LEO 10103

EBECRYL® LEO 10103 is a multifunctional acrylate that in the presence of an amine synergist can enable the UV curing of printing inks and coatings without, or with only a minimal amount, of photoinitiator. The elimination or reduction of photoinitiator decreases the potential for migration in indirect food contact applications. EBECRYL® LEO 10103 can be used for low migration over print varnishes along with flexographic and offset inks in the entire color range, including white. EBECRYL® LEO 10103 at 10-20% by weight in a coating or ink can provide a good balance of surface and through cure.

Nippon Carbide Industries

Nippon Carbide Industries Nikasol

Nippon Carbide Industries Nikasol is acrylic polymer water emulsion resin. By providing products centered on pressure sensitive adhesives and other adhesives, we respond to our customers’ various needs. Environmentally conscious products are also available.

Owensboro Specialty Polymers

SERFENE® 195

SERFENE® 195 is a high barrier, polyvinylidene chloride (PVDC) latex. Materials coated with Serfene 195 have excellent resistance to water vapor, gases, and grease. This latex can also be used as a top coat over other high barrier PVDC’s when a low temperature heat seal is desired. The coating exhibitsexcellent block resistance and slip properties immediately after the coating operation. Serfene 195 is recommended when a PVDC is to be used in-line and wound against another coating which may block, for example, certain inks. It is also recommended for thermoforming applications. On plastic films, a primer is necessary for adequate adhesion.