Glass Coatings

Cytonix, LLC

FluoroSyl 880.00

FluoroSyl is triethoxysilane terminated, bifunctional perfluoropolyether (PFPE) designed as a low surface energy treatment for glass, siliceous surfaces, metals, and other substrates that have hydroxyl (–OH) groups on the surface. FluoroSyl is a hydrophobic and oleophobic coating. FluoroSyl provides long-lasting, antifouling, anti-fingerprint, and anti-smudge properties. FluoroSyl 880 is a good replacement for Fluorolink S10.

Albemarle Corp

Ethacure® 100-LC

Ethacure® 100-LC is a low-color curing agent for polyurethanes and epoxy resins. It may also be used as a chain extender for polyurethane and polyurea elastomers, particularly in reaction injection molding and spray applications.

Bomar Specialties LLC

Bomar Oligomers® BRC-841

Bomar™ BRC-841 is a low-molecular-weight, difunctional, hydrophobic urethane acrylate that can be effectively formulated for steel and various plastichard coatings. The resulting hard, tough film makes an effective non-yellowing protective single-coating. The low water absorption and alkaline resistance make BRC-841 ideal for the following industries: aerospace, automotive, appliances, cosmetic, electronic, industrial, medical devices, metal finishing, and UV-curable inks and coatings.

allnex

UVEKOL® S 15

UVEKOL® S 15 is a one-component acrylic resin for the lamination of glass systems. It is cured under UV light for 20 minutes. The UVEKOL S 15 interlayer produces glass laminates with excellent impact resistance. It can be applied with nearly all kinds of glass: flat and bent, tempered, coated, and other types of glass.

Bomar Specialties LLC

Bomar Oligomers® BRC-443

Bomar™ BRC-443 is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercialapplications. The resulting tough film makes an effective non-yellowing, protective single-coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443 exhibits retention of mechanical properties after exposure to high temperatures (200oC for 30 minutes). In addition to the adhesion properties below, BRC-443 also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene

Bomar Specialties LLC

Bomar Oligomers® BRC-843S

Bomar™ BRC-843S is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes a functional, non-yellowing, protective single-coating that extends the substrates use-life. BRC-843S is a softer and more flexible version of BRC-843. This oligomer is also tougher then BRC-843. The low water absorption and alkaline resistance make this oligomer perfect for specialty applications in the following industries: aerospace, appliance, automotive, electronic, coatings & inks for steel, plastic, glass and medical device.

DOG Chemie

Deolink® Epoxy TE-100

Deolink Epoxy TE-100 and Deolink Epoxy TM-100 are reactive bonding and coupling agents which are compatible with a large number of resins, like epoxy, acrylic, urethanes etc. Compared with amino silanes, Deolink Epoxy TE-100 and Deolink Epoxy TM-100 will not cause yellowing and can support the shelf life

Bomar Specialties LLC

Bomar Oligomers® BRC-443D

BRC-443D is a difunctional, hydrophobic urethane acrylate which can be formulated to be used in heavy-duty industrial and commercial applications. The resulting tough film makes an effective non-yellowing, protective single coating that extends the substrate’s use-life. The low water absorption and acid and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, electronics, industrial, medical device, metal finishing, and UV-curable inks & coatings. BRC-443D exhibits retention of mechanical properties after exposure to high temperatures (200°C for at least 30 minutes). In addition to the adhesion properties listed in the table below, BRC-443D also shows excellent adhesion to ABS, PVC, PMMA, Nylon-6, and Polystyrene.

allnex

UVEKOL® FR-C

UVEKOL FR-C is a single component liquid acrylic resin designed for glasses lamination. It was developed specifically to confer safety impact resistance to fire resistant ceramic glass. It is cured with low intensity ultraviolet (UV) light to provide an optically clear, transparent interlayer with excellent bond strength to glass. Once cured, typically in 20 minutes, no additional processing is required.

Bomar Specialties LLC

Bomar Oligomers® BRC-843D

BRC-843D is a difunctional, hydrophobic urethane acrylate which can formulated to be in heavy—duty industrial and commercial applications. The resulting tough film makes an effective, non-yellowing, protective single coating that extends the substrates use-life. The low water and alkaline resistance make this oligomer perfect for the following industries: aerospace, appliance, automotive, cosmetic electronic, industrial, medical device, metal finishing, and IN-curable inks 8 coatings BRC-843D exhibits retention of mechanical properties after exposure to high temperatures (200T for 30 minutes). In addition to the adhesion properties listed in the table BRC-843D also shows excellent adhesion to ABS, PVC, PMMA and polystyrene.

Chitec Technology

Chivacure® 300

Chivacure® 300 is an oligomeric photoinitiator featuring transparent, ultrathin, non-yellowing, and non-migration properties. Equipped with a special “multi-warhead” structure, Chivacure® 300 is highly resistant to oxygen inhibition and can retain sufficient free radicals to initiate the UV curing reaction. Therefore Chivacure® 300 is particularly suitable for applications requiring ultrathin transparent coatings that are less than 5 μm thick (e.g., food or cigarette packaging, adhesive tapes, scratch-resistant glass and metal coatings).

MPI Chemie

MPI Chemie UV-1130 (213)

MPI Chemie UV-1130 (213) is a liquid hydrophilic benzotriazole-based UV absorber for coatings, printing and packaging, adhesives and sealants. It is universally applicable in solvent- and water-based coatings including UV-curable systems.

ADDAPT Chemicals BV

BioWet™ 60G

ADDAPT BioWet 60 is a solvent free, ready biodegradable Glass Adhesion promoter and Glass Corrosion inhibitor for aqueous systems on glass substrates. A proprietary blend of PolyAlkylene Glycols and Polyhydroxy – Amide. All constituents are EINECS registered and comply with the FDA regulation (incidental contact with foodstuff).

ADDAPT Chemicals BV

BioWet™ 45

ADDAPT BioWet 45 is a solvent free, ready biodegradable wetting/leveling agent for aqueous systems such as cleaning agents and coatings/lacquers on glass substrates. ADDAPT BioWet 45 exhibits good dynamic and static surface tension values. A blend of PolyAlkylene Glycols and Polyhydroxy - Amide. The ingredients are EINECS registered.

Cytonix, LLC

FluoroSyl 3750

FluoroSyl 3750 is hydrophobic and oleophobic perfluoropolyether derivatives. These coatings provides long-lasting, anti-fouling, anti-fingerprint and anti-smudge properties to properly cleaned surfaces. FluoroSyl bonds to glass, plastic and metal surfaces. This produces an easy-to-clean, low surface energy, low refractive index, transparent, oil, water and stain repellent coating that is less than 10 nanometers thick.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 20cSt

XIAMETER(TM) PMX-200 Silicone Fluid 20cSt is a polydimethylsiloxane fluid commonly used as a base fluid in personal care products due to its excellent spreading characteristics. It is clear, tasteless, essentially odorless, and non-greasy. Commercial bulk-polymerized dimethyl silicone fluids, such as XIAMETER(TM) PMX-200 Silicone Fluid 20cSt, typically contain trace amounts of impurities.

Dow North America

XIAMETER(TM) PMX-200 Silicone Fluid 5 cSt

XIAMETER(TM) PMX-200 Silicone Fluid 5 cSt is a polydimethylsiloxane fluid. It is commonly used as a base fluid in personal care products due to its excellent spreading characteristics. This product is clear, tasteless, essentially odorless, and non-greasy. Being a commercial bulk-polymerized dimethyl silicone fluid, it typically contains trace amounts of impurities.

BTC Europe GmbH

Tinuvin® 479-DW (N)

BTC Europe GmbH

AQACell® HIDE 6399 X

Gelest Inc.

Gelest SIB1660.0

Gelest BIS[(3-METHYLDIMETHOXYSILYL)PROPYL]POLYPROPYLENE OXIDE (SIB1660.0) is a dual-functional polypropylene glycol. This product functions as an adhesion promoter, binder and resin, and coupling agent.

CHT Group

VARIPHOB® CC 1216

VARIPHOB® CC 1216 is a surfactant-free micro emulsion of a unique amino-functional polysiloxane and special additives. After drying, it leaves a transparent and cross-linked hydrophobic film. Belonging to the VARIPHOB® product portfolio, this product guarantees long-lasting and environment-friendly protection. It helps reduce maintenance and cleaning costs, while the prolonged service life of concrete increases efficiency and saves resources.

CHT Group

CHT Group DF-758

CHT Group DF-758 is a 45% active silicone antifoam emulsion that is formulated to control foam in a wide variety of industrial applications. It was designed as a glass grinding aid to facilitate defect-free glass polishing. This product is ideal when low foam and excellent lubricity are needed.

The Mitsubishi Chemical Group

DIACRON™ FC-3352

DIACRON™ FC-3352 is a polyester resin with excellent environmental friendliness using 5wt% of biomass material. It is a high Tg and a low molecular weight (Mw)-grade and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Heat-resistant Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3278

DIACRON™ FC-3278 is a high Tg grade polyester resin with excellent environmental friendliness using 50wt% or more of recycled material. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion. Heat-resistant Contains 50% recycled material   Benefits: Good heat resistance Durability   Applications: Powder Coating  PCM coatings      For various types of inks    *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3288

DIACRON™ FC-3288 is a polyester resin with excellent pigment dispersibility. It is a low Tg grade and is optimal as a binder for paints and adhesives. By blending with a high Tg grade DIACRON, it exhibits excellent adhesion and bendability to plastic films, moldings and metals such as aluminum, copper and iron. It improves hardness, heat resistance and toughness by using additive such as isocyanates.   Features: Low Tg and excellent substrate adhesion Excellent chemical and weather resistance Excellent pigment dispersion   Benefits: Use of biomass raw materials Flexibility  Durability   Applications: PCM coatings Adhesives for films Binder for screen inks Heat seal   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ ER-502

DIACRON™ ER-502 is a polyester resin with excellent solvent solubility. It is a high acid value and high molecular weight (Mw)-grade and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: PCM coatings For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3399

DIACRON™ FC-3399 is a polyester resin under development can be used for powder coating. It works well to keep color for a long time and has excellent mechanical strength by using curing agents such as TGIC and Primid (HAA) and Epoxy resins.   Features: Excellent chemical and weather resistance Excellent pigment dispersion Good mechanical strength Can be used with cross-linking agents   Benefits: Good heat resistance Durability High solid differentiation   Applications: Powder Coating For various types of inks Solventborne adhesive   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-3294

DIACRON™ FC-3294 is a polyester resin with excellent solvent solubility and is optimal as a binder for paints and inks. It exhibits excellent adhesion to plastic films, moldings and metals such as aluminum, copper, and iron. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent pigment dispersion. Can be used with cross-linking agents. Excellent chemical and weather resistance   Benefits: Solvent solubility High solid differentiation Durability   Applications: For various types of inks (Screen printing and inkjet, etc. )               PCM coatings      Solventless & High Solids Coating     *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-1565

DIACRON™ FC-1565 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of FC-1494 and is optimal as a binder for paints and inks due to its excellent pigment dispersibility. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Excellent chemical resistance Excellent pigment dispersion Can be used with cross-linking agents   Benefits: Solvent solubility Durability High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

DIACRON™ FC-1588

DIACRON™ FC-1588 is a polyester resin with excellent solvent solubility. It is a low molecular weight (Mw)-grade of ER-535 and is optimal as a binder for paints and inks. Especially, the use of organic solvents can be reduced because low viscosity high-solid solutions are possible. It improves hardness, heat resistance, toughness, and solvent resistance by using curing agents such as isocyanates and epoxy resins.   Features: Low temperature fusion Excellent metal adhesion Excellent pigment dispersion. Can be used with cross-linking agents   Benefits: Solvent solubility High solid differentiation Use of biomass raw materials   Applications: Solventborne Coating For various types of inks Solventless & High Solids Coating   *DIACRON™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Deco-Chem

Deco-Chem Static Cling

Deco-Chem’s Static Cling Ink Series is a leader of UV gloss, flat, textured and color coatings for static cling substrates. It’s the perfect ink choice for applications involving labels, window graphics, signs and decals. Static Cling ink exhibits outstanding flexibility and adhesion while still maintaining a tough surface.

Deco-Chem

Deco-Chem Gloskil 3102

Gloskil is a flattening agent that has already been incorporated into a liquid. Therefore, no particulate material will be released into the air. The additive also has the added benefit of improving leveling, flow, and definition.

Deco-Chem

Deco-Chem Mirror Etch MER-9091

Deco-Chem’s Mirror Etch Resist inks are applied to the back of a mirror. Special chemicals will take away all of the mirror coating except for the etch resist, leaving a second surface mirror image where the Mirror Etch Resist was printed.

HENZE BORON NITRIDE PRODUCTS

HeBoCoat® PL-E 125

HeBoCoat® PL-E 125 is a Boron Nitride coating in an ethanol base with the addition of an inorganic binder. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HENZE BORON NITRIDE PRODUCTS

HeBoCoat® SL-E 125

HeBoCoat ® SL-E 125* is a boron nitride spray supplied in an easy-to-use aerosol can. The use of an ethanol base ensures good surface wetting of the coated substrate as well as quick drying. The inorganic binders ensure very good adhesion to metals, glass, ceramics and graphite, especially at high temperatures. The proportion of fine boron nitride particles endow the resultant coating with good release and lubricating properties. HeBoCoat® SL-E 125 is a Boron Nitride spray supplied in a practical aerosol can. Its ethanol base enables good substrate wetting and quick drying. The high temperature adhesive properties of the coating to metallic substrates, glass, ceramics and graphite are excellent.

HENZE BORON NITRIDE PRODUCTS

HeBoCoat® EL-W 250

HeBoCoat®EL-W 250 is a highly concentrated water-based Boron Nitride coating for use in the aluminum casting industry and in the finishing of fiber glass.