Specialty Coatings

Mitsubishi Chemical Group

jER™ YX7105

jER™ YX7105 is a liquid-type epoxy resin with toughness, flexibility, and high stretchability. It is used as an impact modifier for semiconductor, printed electronics and wearable devices to avoid bending and warpage. jERTM YX7105 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol. FeaturesExcellent adhesionGood toughnessGood mechanical, impact and crack resistanceExcellent elasticity and flexibilityApplicationsPrinted electronics (resist ink, build-up wire board, flexible printed wire board, metal core printed circuit board)Semiconductor manufacturing (liquid mold compound, underfill, sidefill, diebonding, ACF, NCF, ACP, NCP)Base film and sheet for wearable devicesCoatingsAdhesives *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

LIPOXOL 6000 MED powder

LIPOXOL 6000 MED powder is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

Mitsubishi Chemical Group

jER™ 4250

jER™ 4250 is a hybrid bisphenol A/bisphenol F-type epoxy resin that is more flexible than conventional polymer-type epoxy resins. It can be used as an additive to add toughness, insulating and vapor barrier properties and resistance to heat, water and chemicals to a variety of applications.   Features Polymer-type epoxy resin with epoxy functional groups at the both ends High molecular weight High softening points  Good adhesion Applications PCM, CAN and other coatings Paint Thermoplastics  Printed electronics  Plastic processing    *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

allnex

ADDITOL® XL 255 N

Additol® XL 255 N is an electroneutral wetting agent and dispersing agent for pigments. It reduces flocculation in the case of all common organic and inorganic pigments used in air drying and stoving paint systems.

Mitsubishi Chemical Group

jER™ YX7110

jER™ YX7110 is a tough and flexible liquid-type epoxy resin. It can be used as an impact modifier for brittle materials, as an additive to increase impact resistance, and for stress relaxation to avoid cracking and warpage. jERTM YX7110 is an adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol.   Features Adduct formed from the reaction of epichlorohydrin and an aliphatic and aromatic polyol Crack and impact resistance Excellent flexibility and elasticity High viscosity Low warpage Maintains flexibility even after full-curing Applications Coatings Adhesives Composites Potting and encapsulation materials Base film/sheet for wearable devices   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Mitsubishi Chemical Group

jER™ YX4000

jER™ YX4000 is a biphenol-type solid epoxy resin with significantly low melt viscosity, low water absorption and a good balance between adhesiveness and rigidity against stress. It can be used for electrical and electronic applications. jERTM YX4000 is an adduct formed from the reaction of epichlorohydrin and tetramethylbiphenol   Features Abrasion, heat and water resistance Electrical insulation Wear resistance Product Highlights Significantly low melt viscosity (melting point: 108°C) Low chroline content Low water absorption  Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials Powder coatings for ship bottoms Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

allnex

MODAFLOW® 2100

Modaflow® 2100 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, reduces pinholes, fish eyes, craters, and orange peels, improves substrate wetting, aids in air release, and facilitates pigment dispersion.

allnex

MODAFLOW® 9200

Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.

Mitsubishi Chemical Group

jER™ YX8800

jER™ YX8800 is an anthracene-type epoxy resin with significantly low melt viscosity, high Tg and low-CTE. It can be used for electrical and electronic applications, carbon fiber reinforced polymers (CFRP) and other applications that require flame retardancy. jERTM YX8800 is an adduct formed from the reaction of epichlorohydrin and 1,4-dihydro-9,10-anthracenediol.   Benefits High flame retardancy Well-balanced mechanical properies High electrical reliability  Features Abrasion, heat and water resistance Electrical insulation Good thermal stability High glass tansition temperature Low CLTE Significantly low melt viscosity (melting point: 107°C) Low chroline content Applications Electrical and electronic applications (EMC, solder resist, PCB) Potting and encapsulation materials. Powder coatings Adhesives Composites   *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

allnex

MODAFLOW® RESIN

MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.

allnex

BECKOPOX™ EH 694

BECKOPOX™ EH 694 is an anhydride hardener for use with solid epoxy resins, OH-functional polyesters or as an additional crosslinker for epoxy/polyester hybrid systems for the manufacture of powder coatings. Formulations based on BECKOPOX™ EH 694 exhibit chemical and over-bake resistance.

allnex

SETALUX® 1385 BX-51

SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

Bomar Specialties LLC

Bomar Oligomers® BR-641D

Bomar™ BR-641D is a Polybutadiene (PBD) urethane acrylate, which was designed to meet rigorous electronic coating applications. This oligomer has exceptional adhesion to various metals, glass,and polycarbonate substrates. BR-641D has many desirable properties that are typical to PBD resins, combined with radiation curability. In applications requiring thermal cycling resistance, BR-641D withstands the extremes of temperature typical of such tests, without undue degradation of properties. In addition to the adhesion properties listed in the table below, BR-641D showed excellent adhesion to PMMA, ABS, PVC, Nylon-6, Polystyrene,and Polypropylene.

Mitsubishi Chemical Group

jER™ 1256

jERTM 1256 is a solid epoxy resin produced from Bisphenol A epoxy resin. It is a polymer-type epoxy resin with epoxy functional group at the both ends. It can be used to add toughness, insulating and vapor barrier properties, and resistance to heat, water and chemicals in a variety of applications. FeaturesHigh molecular weightHigh softening pointsGood film formerHydrolysis resistanceFlexibilityStrong adhesionApplicationsPCM, CAN, and other coatingsPaintsFiber-reinforced materialsThermoplasticsPrinted electronicsPlastic processing *jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

Sasol

LIPOXOL 6000 MED flakes

LIPOXOL 6000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products.It is a combination with LIPOXOL 6000 MED Powder under LIPOXOL 6000 MED. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Mitsubishi Chemical Group

jER™ YX7400N

jER™ YX7400N is an adduct formed from the reaction of epichlorohydrin and an aliphatic polyol.FeaturesAdduct formed from the reaction of epichlorohydrin and an aliphatic polyolExcellent elasticityImpact resistanceApplicationsConsumer appliances and electronicsElectrical devices, assemblies, parts and componentsElectronics adhesivesElectrical and electronic packaging and assemblySpecialty and conformal coatingsPotting compoundsPrinted circuit boards (PCBs)Semiconductor manufacturing*jER™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

allnex

EBECRYL® 168

EBECRYL® 168 is an acidic methacrylate adhesion promoter designed as an additive for ultraviolet (UV) and electron beam (EB) curable coatings on metal. It is recommended for use in: general metal coatings and primers, coatings for galvanized pipe and tube, coil coatings, solder resist formulations.

allnex

EBECRYL® 350

EBECRYL® 350 is a silicone diacrylate that improves slip, substrate wetting, and coating flow and leveling when used as an additive in formulations cured by ultraviolet light (UV) or electron beam (EB). Cured films containing EBECRYL® 350 will exhibit a smooth, tack free surface, with good blocking resistance. Because of its acrylate functionality, the silicone cures into the polymeric backbone, thus eliminating the migration that free silicones often display in coatings. EBECRYL® 350 is recommended for use in: overprint varnishes, clear coatings on paper, plastics and metal, and release coatings.

allnex

EBECRYL® 8402

EBECRYL® 8402 is a low viscosity aliphatic urethane diacrylate. Films cured by ultraviolet light (UV) or electron beam (EB) exhibit good flexibility, toughness and excellent exterior durability. Low viscosity coatings or enhanced performance via increased oligomer content are possible. It is recommended for use in: coatings for wood, coatings for plastics, flexographic inks, screen inks, and exterior durable coatings.

allnex

SETALUX® 1184 SS-51

SETALUX® 1184 SS-51 is an acrylic polyol with 2.0 % OH (calculated on non-volatiles). Excellent fast drying, very good through hardening, good stackability, long potlife, good chemical resistance, excellent mar and stain resistance, good light fastness, good compatibility with poly-isocyanates.

allnex

ADDITOL® VXW 6208

ADDITOL® VXW 6208 is a polymer non-ionic dispersing additive for grinding inorganic and organic pigments in water or in waterborne alkyd resin, acrylic, epoxy, and urethane emulsions.

NuSil Technology

NuSil™ MED-4162

NuSil™ MED-4162 is a silicone dispersion.

Sasol

LIPOXOL 4000 MED SP

LIPOXOL 4000 MED SP is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

allnex

DAOTAN® TW 6450/30WA

DAOTAN® TW 6450/30WA is a polycarbonate based aqueous aliphatic polyurethane dispersion. It is recommended as the NMP / NEP- free alternative for Daotan™ (V)TW 1236. When dried at ambient temperatures, it creates clear, crack- free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties as well as very good adhesion to different plastic substrates

Kuraray

Kuraray Poval™ 4-98

KURARAY POVAL™ 4-98 (formerly Mowiol® 4-98) by Kuraray is a fully saponified polyvinyl alcohol having varying degree of polymerization and hydrolysis. It is an odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It possesses good penetration capacity and good adhesion properties. It provides high cohesion, toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. KURARAY POVAL™ 4-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

NuSil Technology

NuSil™ CV-1152

NuSil™ CV-1152 is a controlled volatility RTV silicone conformal coating.

Kuraray

Kuraray Poval™ 10-98

KURARAY POVAL™ 10-98 (formerly Mowiol® 10-98) by Kuraray is a fully saponified, odorless, water-soluble polyvinyl alcohol manufactured by alcoholysis of polyvinyl acetate. Shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Exhibits good penetration capacity and good adhesion properties. Offers high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 10-98 is suitable for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Nippon Shokubai

EPOMIN™ P-1050

EPOMIN™ P-1050 is the water soluble polymer which is made by polymerization of ethyleneimine. EPOMINE is not a entirely linear polymer but a partly branched polymer containing primary, secondary, and tertiary amine.

allnex

EBECRYL® 8210

EBECRYL® 8210 is an aliphatic urethane acrylate that exhibits low viscosity and high reactivity in ultraviolet (UV) light or electron beam (EB) curable coatings. Cured films of EBECRYL® 8210 demonstrate high hardness with good scratch, abrasion and chemical resistance. EBECRYL® 8210 is recommended for: coatings requiring high scratch/abrasion resistance and improved adhesion, a modifying oligomer to increase cure speed, solvent resistance and abrasion resistance, and dual cure coating systems.

allnex

EBECRYL® 7100

EBECRYL® 7100 is an acrylate functional oligomeric amine resin generally used as an additive or diluent for more viscous oligomers. When used in formulations with a photoabstraction type photoinitiator (e.g. Benzophenone), EBECRYL 7100 has an accelerating effect on the UV cure speed. EBECRYL 7100 also promotes adhesion to plastic substrates such as polyester, ABS, polycarbonate and polypropylene oxide. It is recommended for use in: adhesives and coatings for plastics, clear coatings for paper, screen ink vehicles, metal decorating inks and coatings, wood fillers and coatings, lowering viscosities of other resin systems, and accelerating UV cure response.

allnex

SETALUX® D A 450 BA/X

SETALUX D A 450 BA/X is a hydroxyl-functional acrylic polyol that is used in the formulation of very fast-drying two component polyurethane coating systems. When SETALUX D A 450 BA/X is used with aliphatic/aromatic polyisocyanates based on toluene diisocyanate and hexamethylene diisocyanate, two-component filler coats and topcoats for wood are possible that can be sanded very early and stacked after a short time.

allnex

EBECRYL® 8465

Ebecryl® 8465 is a clear liquid undiluted aliphatic urethane triacrylate oligomer. Films of Ebecryl® 8465 cured by UV or EB exhibit excellent exterior durability, toughness and good flexibility, as well as the non-yellowing properties typical of an aliphatic urethane. It is recommended for use in coatings for wood and plastics requiring excellent exterior durability.

allnex

ADDITOL® XL 6577

ADDITOL® XL 6577 is a low molecular weight additive, which is especially able to deflocculate and stabilize inorganic pigments very actively by electrical charging at the pigment surface and permits very low viscosity millbase formulations. It can be used as a wetting and dispersing agent for solvent-containing systems.

Sasol

LIPOXOL 3350 MED flakes

LIPOXOL 3350 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. It is a combination with LIPOXOL 3350 MED powder under LIPOXOL 3350 MED For documents specific to a region, please contact Sasol using the 'Request Document' button.

Sasol

LIPOXOL 4000 MED flakes

LIPOXOL 4000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products. It is a combination with LIPOXOL 4000 MED Powder under LIPOXOL 4000 MED For documents specific to a region, please contact Sasol using the 'Request Document' button.

Bomar Specialties LLC

Bomar Oligomers® BRS-14320S

Bomar® BRS-14320S is a difunctional oligomer that combines a robust silicone backbone into a urethane acrylate oligomer. The resulting product provides an unusual combination of desirable properties: softness, flexibility, and temperature resistance. BRS-14320S is a candidate for consideration in formulating 100% UV soft-touch coatings and also for electronics applications