Printing & Packaging

MPD Industries

MPD Industries UVP 0612 99

MPD Industries UVP 0612 99 is a difunctional epoxidesed soyabean oil acrylate oligomer that offers very good pigment wetting characteristics and produces flexible well adhering free radically cured films. It has low skin irritancy and suitable for flow and leveling of UV/EB curable ink and coating.

IGM Resins

Omnicat 440

Omnicat 440 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

IGM Resins

Omnicat 320

Omnicat 320 is a colorless liquid photoinitiator of mixed triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Omnicat 320 has been designed for the cationic curing of inks and coatings based on epoxy, oxetane, and vinyl ether formulations. Omnicat 320 exhibits high cure-speed, low odor, and excellent post cure.

ADDAPT Chemicals BV

PolySurF™ Hpm

ADDAPT_x0001_ PolySurF HPm is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate. It has a higher mono-content compared to PolySurF HP

ADDAPT Chemicals BV

PolySurF™ HP

ADDAPT PolySurF HP is a solvent free UV-curable additive. It can also act as a co-polymerisable anionic surfactant and/or adhesion promoter with flame retardant properties. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester; where the reactive Acrylate group is Methacrylate.

MPD Industries

MPD Industries UVP 0611 99

UVP 0611, is a fatty acid based difunctional Bisphenol A based epoxy acrylate oligomer that offers very fast cure speeds and chemical resistence. It imparts toughness and flexibility to cured lithographic and screen inks also to plastic and wood coatings.

IGM Resins

Omnicat 432

Omnicat 432 is a mixture of triarylsulfonium hexafluorophosphate salts and propylene carbonate, for cationic curing of epoxy, oxetane, and vinyl ether formulations.

IGM Resins

Omnicat 550

Omnicat 550 is a highly reactive odorless and benzene free photoinitiator designed for use in cationic curing inks and coatings. It is particularly suited to use in pigmented inks. Omnicat 550 has good solubility in the cycloaliphatic epoxides and oxetane diluents used in cationic UV curing formulations. Omnicat 550 is not sensitized by either hydroxyketone photoiniators, thioxanthones or anthracene derivatives.

The Mitsubishi Chemical Group

SHIKOH™ UV-3700B

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

The Mitsubishi Chemical Group

SHIKOH™ UV-3300B

SHIKOH™ UV-3300B is UV curable urethane acrylate oligomer with excellent soft-elasticity, and very high elongation. It also shows good mechanical properties even at low temperature. EB and Thermal cure systems are also applicable. Features Soft-elastic, High elongation Suitable for adhesion bond and metalizing undercoat with monomers Good mechanical properties at low temperature Non-yellowing Applications Adhesive : UV/ EB/ Thermal-curable adhesive for electronics device, optical use, and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Osaka Organic Chemical Industry LTD

Osaka Organic Chemical Industry LTD MEDOL-10

MEDOL-10 has a novel unique structure. It was developed for replacement of THFA, tetrahydrofurfuryl acrylate. MEDOL-10 only has exclamation pictogram on REACH. Its viscosity is low enough for many applications like UV inkjet ink. Some of paper said high polarity pendant group induces high curing speed [1]. Dioxolane structure induces high solvency as same as THFA because both THF and dioxolane are good solvent.

Deuteron

Deuteron UV 1242

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

MPD Industries

MPD Industries UVP 0202 99

MPD Industries UVP 0202 99 is a Di functional monomers, which polymerize when expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer. It is a fast curing monomer with low valatility & a hydrophobic backbone.

Komo Chemical

Komo Chemical KE95F

Komo Chemical KE95F resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries

MPD Industries UVP 0835 99

UVP 0835 is hexafunctional acrylated polyester oligomer. It adds fastcure response, hardness and abrasion resistence to UV/EB curable inks coatings and adhesives.

Deuteron

Deuteron UV 3100

Deuteron UV 3100 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 3100.Deuteron UV 3100 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 3100 is soluble in these binder systems including common solvents and reactive diluents. back

MPD Industries

MPD Industries UVP 0201 99

MPD Industries UVP 0201 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer.

ADDAPT Chemicals BV

PolySurF™ ACE

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

Deuteron

Deuteron UV 1250

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

Komo Chemical

Komo Chemical KB100S

Komo Chemical KB100S resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries

MPD Industries UVP 0810 99

MPD Industries UVP 0810 99 is difunctional acrylated polyester oligomer. It has good lithographic behavior pigment wetting and fast cure response. It is recommended for use in lithographic and flexographic ink formulations.

IGM Resins

Omnicat 445

Omnicat 445 is a low odor, benzene free iodonium hexafluorophosphate salt for cationic curing of epoxy, oxetane, and vinyl ether formulations.

Komo Chemical

Komo Chemical KA100L

Komo Chemical KA100L resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries

MPD Industries UVP 0203 99

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

IGM Resins

Omnirad 369

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

Komo Chemical

Komo Chemical KA100H

Komo Chemical KA100H resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries

MPD Industries UVP 0825 99

UVP 0825 is tetrafunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has a high cross link density which helps to enhance abrasion and solvent resistence.

ADDAPT Chemicals BV

PolySurF™ HPL

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

MPD Industries

MPD Industries UVP 0204 99

UVP 0204, Neo-­Pentyl Glycol diacrylate (NPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It has good chemical resistence and high reactivity .It is compatible with a wide range of acrylated resins.

Komo Chemical

Komo Chemical KH100

Komo Chemical KH100 resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

MPD Industries

MPD Industries UVP 0205 99

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

MPD Industries

MPD Industries UVP 0401 99

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

MPD Industries

MPD Industries UVP 0206 99

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

IGM Resins

Omnicat BL 550

Omnicat BL-550 is a liquid photoinitiator blend, based on Omnicat 550 (20%), Propylene Carbonate (25%) and cycloaliphatic epoxy (55%).

Komo Chemical

Komo Chemical 384T

Komo Chemical 384T resin has the performances of light color, low odor, and excellent compatibility with high polymer materials. It can largely enhance the tack of the pressure sensitive adhesives.

Deuteron

Deuteron UV 1240

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back