Printing & Packaging

Egyptian Carbonate Company (S.A.E.) ECC

MICROCARB NF5

MICROCARB NF5 is a product of high degree of whiteness produced from selected natural finest microcrystalline rhombohedra Calcium Carbonate.

Karntner Montanindustrie

Karntner Montanindustrie Submicro 4-15

Karntner Montanindustrie Submicro 4-15 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.

TOROWHITE (Toro Gips)

TOROWHITE (Toro Gips) FIL 04

TOROWHITE (Toro Gips) FIL 04 is a Calcium Sulfate Anhydrite (AII) functional additive with very high purity & good whiteness. FIL 04 is produced from specially selected Food & Pharma Grade natural gypsum. Narrow particle size distribution enables high performance in terms of thermal and mechanical characteristics, dimensional stability, optical properties and processability. Made by controlled dehydration of Calcium Sulfate Dihydrate at high temperature it is known as «insoluble» Anhydrite II due to its very low absorption of water.

USG Corporation

CAS-20® 4 Anhydrous Calcium Sulfate Filler

CAS-20® 4 Anhydrous Calcium Sulfate Filler is manufactured from high purity gypsum rock using controlled calcination and fine grinding; the calcination process used greatly reduces its moisture affinity. USG CAS-20-4 Anhydrous Calcium Sulfate Filler can be used at high loadings and consistently provides an excellent balance of properties and good surface appearance. It is ideal for food packaging applications that require a filler with high purity and food acid resistance. USG CAS-20-4 Anhydrous Calcium Sulfate Filler can also be used as a partial replacement for titanium dioxide (TiO2) because of its high brightness and opacity. The narrow particle size distribution contributes to optimum impact properties in thermoplastics; USG CAS-20-4 Anhydrous Calcium Sulfate Filler finds success in a variety of thermoplastic, thermoset and plastisol systems. In addition, the low Mohs hardness minimizes abrasion to processing equipment. USG CAS-20-4 Anhydrous Calcium Sulfate Filler is available in 50 lb. bags or 2,000 lb. semibulk.

European Plastic Joint Stock Company

European Plastic Joint Stock Company PP Filler Masterbatch

European Plastic Joint Stock Company PP Filler Masterbatch is compounded of Calcium Carbonate CaCO3, Polypropylene PP as the carrier and other special additives by twin-screw machines.

USG Corporation

CAS-20® 4 Calcium Sulfate Filler

Cas-20® 4 Calcium Sulfate Filler can be used at high loadings and consistently provides an excellent balance of properties and good surface appearance.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS30

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LKB30

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LKB60

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS60

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Suncolor Corporation

SUNSPACERS™ 04.X

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP20

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

20 Microns

Silfermin FLS 5

MSE Supplies

MSE Supplies 1-2 um Alpha Aluminum Oxide (Alumina) Al2O3 Powder 99.999% 5N

20 Microns

Silfermin FLS 2

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP15

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LP10 M

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP90

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

20 Microns

Silfermin FLS 7

20 Microns

20 Microns Talc Supreme

MSE Supplies

MSE Supplies 300 nm High Purity 99.99% Alpha Aluminum Oxide Nanoparticles

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS20

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPP60

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

20 Microns

Hyper 200 R

Our Calcined Clay - Hyper 200 R is calcined metakaolin produced by removing chemically bound water from the crystal structure. This Calcined clay is brighter than most water-washed clays, offering excellent processing and reinforcement in rubber application.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LP15

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Heartland Industries

Imperium Filler (Engineered Hemp Powder)

Heartland’s Imperium fillers are engineered for polymers. Their particle size typically ranges from 1mm to 6mm.

ACMA for Chemicals and Mining

ACMA 20T Coated Calcium Carbonate

ACMA 20T Coated Calcium Carbonate is natural, surface treated, ultra fine calcium carbonate manufactured from high purity, very white limestone.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LKB90

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

20 Microns

20 Microns Talc HFM 25

Talc HFM 25 is sub-microns particle size platy talc with a high surface area & high aspect ratio to provide excellent barrier properties. During injection molding, these talcs act as ideal reinforcing fillers which provide greater stiffness & impact strength better dimensional stability. It is compatible with all thermoplastics & thermosets.

Suncolor Corporation

SUNSPHERES™ 200 Nm

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LPS10

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LP20

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LP10

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Industrial Minerals

LITHOS Industrial Minerals Talc LP30

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Longyan Shenghe

CENSIL 380

Suncolor Corporation

SUNSPHERES™ 200 Nm ST-3

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.