products in Printing & Packaging: Lubricant (Internal)

Peter Greven

LIGALUB 55 PE

Polyfill Technologies

Polyfill Technologies Antistatic Masterbatch-PT3002

Polyfill Technologies Antistatic Masterbatch-PT3002 is a surface property modifier, which now-a-days finds extensive use by Plastics Processor, to reduce and control the static charges developed on the surface of plastic parts having large surfaces like film, fibers etc as spark discharge formed by static charges can produce serious accidents. Plastics, particularly sensitive to static build up Polyolefins, Nylon, Polyesters, Urethanes, Cellulosics, Acrylics etc. Antistatic Masterbatch-PT3002 is based on Ethoxy Amine, using LLDPE as a carrier resin, compounded in most modern extrusion equipment, using state of art technology.

Peter Greven

LIGASTAR CA 600

Peter Greven

LIGASTAR CA 800

Peter Greven

LIGALUB 11 GE

Peter Greven

LIGALUB 50 PE

Peter Greven

LIGASTAR ZN 101

Peter Greven

LIGASTAR ZN 101/6

PolyVisions

ProFLOW 3000

ProFLOW 3000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

Peter Greven

LIGALUB 80 MEG

Peter Greven

LIGASTAR ZN 101 S

Peter Greven

LIGALUB 10 GE

Peter Greven

LIGALUB FAE

Peter Greven

LIGASTAR CA 600-V

Peter Greven

LIGALUB GT

Peter Greven

LIGALUB 45 ITD

Peter Greven

LIGASTAR MG 700

Peter Greven

LIGASTAR ZN 104 G

Reagens USA Inc.

STABIOL CZ 1111

STABIOL CZ 1111 is good early-color thermostable and long term stable, good transparent product. By combination with ESBO and co-stabilizers like TNPP, the mode of action of STABIOL CZ 1111 is synergistically intensified.

CHT Group

CHT Group TE-35K FG

CHT Group TE-35K FG is a 40% active food-grade emulsion with superb stability over a wide pH range. This product is best suited for de-nesting plastics used in thermoforming for all food packaging resins, rubber treatment, canning applications, and conveyor belts and lubrication.

CHT Group

CHT Group TE-352 FG

CHT Group TE-352 FG is a 40% active food-grade emulsion with superb stability over a wide pH range. Its exceptional particle size and tight distribution also provide excellent freeze-thaw stability. This product is designed specifically for the de-nesting of plastics used in thermoforming, conveyor belts, and lubrication applications.

CHT Group

CHT Group EM 1463 FG

CHT Group EM 1463 FG is CHT’s premier 35% active food-grade emulsion that can be diluted to 1% active. It has small particle size and is the best de-nester with extreme dilution. It can be used in continuous process plastic molding as an antistatic for food-grade packaging and for de-nesting of plastics used in thermoforming.

MOCOM Compounds

ALPERFORM® PE SL FC 0205-14 EA

MOCOM Compounds ALPERFORM® PE SL FC 0205-14 EA is a base polymer consisting of polyethylene low density with a filler/additive system of 2% lubricant. It has a minimum shelf life of 6 months and is dosage dependent on application and operational area, with 5% extrusion and 5% injection molding. It has special features including a slip agent, migration towards surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for use in polyethylene low density, polyethylene linear low density, polyethylene high density, ethylene acrylic acid copolymer, polypropylene, and polypropylene copolymer.

MOCOM Compounds

ALPERFORM® PE SL FC 0207-14 OA

MOCOM Compounds ALPERFORM® PE SL FC 0207-14 OA is a base polymer of polyethylene low density with a filler/additive system of 2% lubricant. It has special features of slip agent, migration towards the surface, food contact, high additive content, free from cadmium, lead and diarylide pigments, high dispersibility, and dust-free. It is suitable for injection molding with a melt temperature of 180-240°C and a mold temperature of 20-40°C, as well as extrusion dependent on the application and operational area. It is recommended for use in the food processing industry, household goods, packaging, and other injection molded, extruded, and blow molded parts.

Mosselman

Mosselman Butyl Stearate (85408-76-0)

Polymer Dynamix

EverGlide® MB3950

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB250H

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB1350

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB3450

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB1840

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Mosselman

Mosselman Calcium Stearate (85251-71-4)

Polymer Dynamix

EverGlide® MB350

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

CAI Performance Additives

CAI Performance Additives ST-PA210

ST-PA210 is essential flow improver for biobased and biodegradable plastics. Recently also approved for use with polycarbonate copolymers! Utilizing low dosings, the ST-PA210 additive is uniquely suited for increasing melt flow index, compatibility & elongation, and improving dispersion in the emerging world of bioplastics. Our customers report verified performance enhancement with no waxy residues.

Polymer Dynamix

EverGlide® MB950

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB1450

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Polymer Dynamix

EverGlide® MB150

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.