products in Film & Foil Coatings

Hagedorn NC

Hagedorn NC TYPE H 24

Hagedorn NC Type H 24 is a medium viscosity NC for the manufacture of lacquers which yield films with strong body of varnish along with good mechanical and durable properties and used in combination lacquers, dipping lacquers, finishing lacquers, spray lacquers, wood lacquersaplicaion fields.

Finma GmbH

Finma-Sil 20-MG

Finma-Sil 20-MG are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Accoat A/S

Accolan LB

Accolan LB are tough, high temperature resistant Fluoroplastic coatings with an optimum low friction to wear ratio. Accolan LB give a good rust protection.

Color Corporation Of America

NovoColor® SF 8149

NovoColor® SF 8149 is a line of highly transparent waterborne pigment dispersions offering excellent color stability and exterior durability. These colorants are capable of matching all types of wood stain colors. NovoColor® SF 8149 colorants are compatible in acrylic emulsion and waterborne or water-dispersible alkyd stains, as well as waterborne coatings for plastics. This product line is for In-Plant and specialty industrial wood stains and coatings, wood graining inks, specialty inks, fabric, plastic, foil, paper, glass, and concrete coatings.

Nobel NC

Nitrocellulose DHX 8/13

Nitrocellulose DHX 8/13 is a dice wood pulp-based film forming resin by Nobel NC. Possesses high content of nitrogen. Used in flexographic and gravure inks, wood coating (buffing finishes, brush coatings, film coatings, primers and spray lacquer), paper coating (calendars), automotive metal coating and aqueous emulsions for leather coating. Nitrocellulose DHX 8/13 shows superior compatibility with a wide range of resins and higher tolerance for aromatic diluents.

Interactive Inks and Coatings

Interactive Inks and Coatings DIRR13-02

Interactive Inks and Coatings DIRR13-02 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

MECO

MECOSTAT® 3/222

MECOSTAT-3/222 - Surface AntiStatic Agents are highly effective liquid coating materials for theantistatic finishing of plastic surfaces as well as for improving slip properties.The resistance to temperature of the coating guarantees that subsequent thermoforming can beperformed without suffering any damage. Furthermore, the antistatic finishing of the materialremains virtually unaffected by the stretching of the material during the thermoforming process

Interactive Inks and Coatings

Interactive Inks and Coatings DIRH13-02

Interactive Inks and Coatings DIRH13-02 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Synpol

Synpol L-97

Synpol L-97 The chemistry of phenolic resin is extremely complex. Phenolic resins are derived from the addition of formaldehyde to phenols. A Para-substitued phenol (di-alcohols) when reacted with formaldehyde gives a condensation reaction which can be easily controlled.

Petkim

Petkim PETILEN H5-21T

PETILEN H5-21T is a low density polyethylene resin produced by high pressure tubular process. Having medium average molecular weight, the product is developed for general purpose applications. PETILEN H5-21T contains no additives.

MECO

MECOSTAT® 3/11

MECOSTAT-3/11 surface antistatic agent is a highly effective liquid coating material for the antistatic finishing of plastic surfaces as well as for improving slip properties. The coating´s resistance to temperature ensures that subsequent thermoforming can be performed without suffering any damage. Furthermore, the antistatic finishing of the material remains virtually unaffected by the stretching of the material during the thermoforming process.

Huafon Group

Huafon Group Polyester-Based TPU HF-4385A

Polyester-Based TPU HF-4385Aby Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Tube&hose, Fabric coating, compounding, Film, Fire hose, Animal ear tag and Accessories Applications.

MECO

MECOSTAT® 3/225

MECOSTAT-3/225 surface antistatic agent is a highly effective liquid coating material forthe antistatic finishing of plastic surfaces as well as for improving slip properties.Fabrics coated with MECOSTAT-3/225 comply with the certificate class-C for antistaticconductive bags.

Tianyi Chemical Engineering Material

Tianyi Chemical Engineering Material HMP-1302

HMP-1302 is a Waterborne polyurethane resin with high glossy and high transparency.

Huafon Group

Huafon Group Polyester-Based TPU HF-4395A

Polyester-Based TPU HF-4395Aby Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Tube&hose, Fabric coating, compounding, Film, Fire hose, Animal ear tag and Accessories Applications.

Finma GmbH

Finma-Sil 30X-5W

Finma-Sil 30X-5W are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Finma GmbH

Finma-Sil 30X-5EM

Finma-Sil 30X-5EM are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Skychem

Skychem Fast Red N-NCA

Skychem Fast Red N-NCA are pre-dispersed pigments in both SS and rs grade nitrocellulose. Ss grade pigmented chips are alcohol soluble for the usage of flexo and gravure printing inks for paper, aluminum foils, plastic films. Rs grade pigmented chips are ester soluble for application in paints, lacquers, leather finishes, cosmetics. Inks made from Skysperse NC pigmented chips have excellent transparency, gloss and resistance to scrub and rub. Skysperse NC pigmented chips are available in both chip and paste forms. As dictated by the applications, the paste dispersions may be available as either super transparent pigments with properties comparable to the chip products or as highly dispersed concentrates with somewhat less transparency. It can provide maximum application compatibility.Fast Red N-NCA are pre-dispersed pigments in both SS and RS grade nitrocellulose.

Interactive Inks and Coatings

Interactive Inks and Coatings DIWR13-03

Interactive Inks and Coatings DIWR13-03 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

CH Polymers

CH Polymers CHP 517

CH Polymers CHP 517 is a Styrene Acrylic Polymer containing 60% solid which has good elasticity and is MIT Free.

Finma GmbH

Sylysia SY 276 F

Sylysia SY 276 F is a white, free-flowing powders of amorphous, micronized silica. sylysia is characterized by the fine pore network and the narrow, defined particle size distribution. These parameters are precisely adjusted to meet a wide variety of applications.

Munzing

AGITAN® 786N

A unique new defoaming chemistry that offers superior persistence and antifoaming ability. AGITAN 786N provides defoaming performance at the highest of shear rate applications, along with the long term persistence to prevent foam formation over significant periods of time. In addition, the moderate to high emulsifiability of AGITAN 786N provides formulators with a defoaming solution that is easy to incorporate into aqueous systems.

Synpol

Synpol AT-60 Acrylic Resin

Synpol AT-60 Acrylic Resin is an acrylic copolymer solution with thermosetting hydroxyl function.

Interactive Inks and Coatings

Interactive Inks and Coatings DIPP13-05

Interactive Inks and Coatings DIPP13-05 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.

Color Corporation Of America

NovoColor® SF 8100

NovoColor® SF 8100 is a line of highly transparent waterborne pigment dispersions offering excellent color stability and exterior durability. These colorants are capable of matching all types of wood stain colors. NovoColor® SF 8100 colorants are compatible in acrylic emulsion and waterborne or water-dispersible alkyd stains, as well as waterborne coatings for plastics. This product line is for In-Plant and specialty industrial wood stains and coatings, wood graining inks, specialty inks, fabric, plastic, foil, paper, glass, and concrete coatings.

Huafon Group

Huafon Group Polyester-Based TPU HF-4390A

Polyester-Based TPU HF-4390Aby Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Tube&hose, Fabric coating, compounding, Film, Fire hose, Animal ear tag and Accessories Applications.

Gold Reef Speciality Chemicals

Gold Reef Speciality Chemicals GR 1103

Gold Reef Speciality Chemicals GR 1103 is polymer composed of cross-linked and plasticized polyvinyl acetate copolymer emulsion.

MECO

MECOSTAT® 3/240

MECOSTAT-3 surface antistatic agents are highly effective liquid coating materialsfor the antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature guarantees that subsequent thermoformingcan be performed without suffering any damage. Furthermore, the antistatic finishingof the material remains virtually unaffected by the stretching of the material during thethermoforming process.MECOSTAT-3/240 is based on isopropanol solvent. It is very suitable for the applicationon flexographic and gravure printing systems.

MECO

MECOSTAT® 3/124

MECOSTAT-3/124 surface antistatic agent is a highly effective liquid coating material for the antistatic finishing of plastic surfaces as well as for improving slip properties. The coating´s resistance to temperature ensures that subsequent thermoforming can be performed without suffering any damage. Furthermore, the antistatic finishing of the material remains virtually unaffected by the stretching of the material during the thermoforming process. MECOSTAT-3/124 is based on isopropanol solvent. It is very suitable for the application on flexographic and gravure printing systems.

Color Corporation Of America

NovoColor® SF 8144

NovoColor® SF 8144 is a line of highly transparent waterborne pigment dispersions offering excellent color stability and exterior durability. These colorants are capable of matching all types of wood stain colors. NovoColor® SF 8144 colorants are compatible in acrylic emulsion and waterborne or water-dispersible alkyd stains, as well as waterborne coatings for plastics. This product line is for In-Plant and specialty industrial wood stains and coatings, wood graining inks, specialty inks, fabric, plastic, foil, paper, glass, and concrete coatings.

Hoganas AB

Amperit® 507.074

Amperit® 507.074 product is Agglomerated, Sintered.

Skychem

Skychem White B-AC

Skychem White B-AC are pre-dispersed pigments in water-soluble styrene-acrylic resins. Water-based acrylic pigmented chips can be used to formulate water-based inks and paints with excellent compatibility and gloss. The chips are soluble in a combination of water, alkali(ammonia or another amine). Skysperse AC pigment chips offer maximum flexibility in the formulation of high-quality waterborne printing inks, paints and coatings.White B-AC pigment chips are pre-dispersed pigments in water soluble styrene- acrylic resins.

Skychem

Skychem Orange B-NCA

Skychem Orange B-NCA are pre-dispersed pigments in both SS and rs grade nitrocellulose. Ss grade pigmented chips are alcohol soluble for the usage of flexo and gravure printing inks for paper, aluminum foils, plastic films. Rs grade pigmented chips are ester soluble for application in paints, lacquers, leather finishes, cosmetics. Inks made from Skysperse NC pigmented chips have excellent transparency, gloss and resistance to scrub and rub. Skysperse NC pigmented chips are available in both chip and paste forms. As dictated by the applications, the paste dispersions may be available as either super transparent pigments with properties comparable to the chip products or as highly dispersed concentrates with somewhat less transparency. It can provide maximum application compatibility.Orange B-NCA are pre-dispersed pigments in both SS and RS grade nitrocellulose.

Finma GmbH

Finma-Sil 8-RX

Finma-Sil 8-RX are aqueous matting agent concentrates with a very broad compatibility in all tested water-based systems, including acrylate and polyurethane dispersions.

Huafon Group

Huafon Group Polyester-Based TPU HF-4080A

Polyester-Based TPU HF-4080Aby Huafon Group is a polyester based thermoplastic polyurethane grade. It is recommended for Tube&hose, Fabric coating, compounding, Film, Fire hose, Animal ear tag and Accessories Applications.

Interactive Inks and Coatings

Interactive Inks and Coatings DIYE13-03

Interactive Inks and Coatings DIYE13-03 has high heat and water resistance which make ink suitable for water-based printing which is an excellent choice for direct or indirect thermal printing applications. Depending on the substrate and heat application, this ink have provided heat resistance up to 450ºF and eliminate pick-off or ink transfer to the print heads. Excellent ribbon transfer allows this ink for extreme versatility of both direct and indirect imaging applications. This ink offers excellent printability on both papers and films and can be used in typical label applications as well.