products in Printing & Inks: Printed Electronics

NovaCentrix

Metalon® JG-106

JG-106 is an electrically conductive gold nanoparticle ink designed to produce conductive traces on substrates such as paper, PET, glass, and polyimide. JG-106 ink is specially formulated for inkjet printing and is compatible with a variety of printheads including the FujiFilm Dimatix Samba. The formulation contains a polymeric additive for improved adhesion to a variety of substrates and cured prints are resistant to water and isopropanol. Applications for the ink include general purpose printing as well as biomedical applications, high density interconnects, and fine line printing.

Inktec

Inktec TEC-PL-010

Inktec TEC-PL-010 prevent film shrinkage of substrate by heating and low Temperature curing. It has a high density after curing because it has few or no gab between particles. That is why our ink can materialize fine pattern with high conductivity.

Inktec

Inktec TEC-PA-060

Inktec TEC-PA-060 is an excellent adhesion on ITO /PET film and has stability over 30μm by laser process. It has a high density after curing because it has few or no gab between particles. That is why our ink can materialize fine pattern with high conductivity.

Inktec

Inktec TEC-LD-017

Inktec TEC-LD-017 is used in the screen printing, photolithographic processing method. It is a substrate of inductor/LTCC body and insulation layer.

Inktec

Inktec TEC-CO-011

Inktec TEC-CO-011 has excellent resistivity, excellent Adhesion and available as R2R printing.

Inktec

Inktec TEC-PR-041

Inktec TEC-PR-041 has excellent resistivity, no head clogging, excellent adhesion with inkjet printing available.

Inktec

Inktec TEC-PK-170BS

Inktec TEC-PK-170BS is a cost effectiveness lower resistivity carbon paste and has excellent workability with good uniformity.

Inktec

Inktec TEC-LT-010

Inktec TEC-LT-010 has a lowest resistivity, low RDC and used in the screen printing, photolithographic processing method.

Inktec

Inktec TEC-EMI-050

Inktec TEC-EMI-050 is a dispensing type spray process and has excellent EMI shielding property ie 70dB@1.5Ghz.

Inktec

Inktec TEC-PA-051

Inktec TEC-PA-051 has fine resolution stability over 60μm line width and has an excellent adhesion on ITO/PET film. It has a high density after curing because it has few or no gab between particles. That is why our ink can materialize fine pattern with high conductivity.

Inktec

Inktec TEC-DP-S10

Inktec TEC-DP-S10 is one dipping process. It has low RDC and high density electrode.

Inktec

Inktec TEC-IJ-010

Inktec TEC-IJ-010 has a lowest resistivity, no head clogging with inkjet printing available.

Inktec

Inktec TEC-CO-021

Inktec TEC-CO-021 also has electrical performance.

Inktec

Inktec TEC-PA-070

Inktec TEC-PA-070 is a cost effectiveness, less consumption, stability over 70μm and has an excellent adhesion. It has a high density after curing because it has few or no gab between particles. That is why our ink can materialize fine pattern with high conductivity.

Inktec

Inktec TEC-PA-088

Inktec TEC-PA-088 is a low consumption and has fine patterning less than 20μm line width, thin layer ≤5μm. It has a high density after curing because it has few or no gab between particles. That is why our ink can materialize fine pattern with high conductivity.