products in Printing & Inks

Pan Technology Inc.

PanTINT® 18R1658

High strength 100% solid colorants with broad compatibility in a wide variety of conventional, low and zero VOC water based coatings and inks. Pigments used in PanTINT 18 Series have been selected to meet the durability and transparency requirements of most high performance applications.

Genesee Polymers

Genesee Polymers GP-367

Genesee Polymers' GP-367 MERCAPTO FUNCTIONAL SILICONE FLUIDisa dimethyl silicone copolymer fluid, containing mercaptopropyl sidechains in addition to the conventional methyl group substituents. The structure of GP-367 is as follows where x= 36 and y = 6:

Michelman

Michem® Prime 4990R

Michem® Prime 4990R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Rishabh Polymers

Rishabh Polymers RPPL-1001

Rishabh Polymers RPPL-1001 is a Penta Esterified Rosin Modified Maleic Resin.

Michelman

Michem® Prime 4983R

Michem® Prime 4983R provides outstanding adhesion to both metallic and cellulosic substrates and enhances the water, grease, oil, and solvent-resistance of coatings and adhesives. It can serve as a tie coat or primer for extrusion coatings, a foil laminate, specialty paper coating, paper sizing agent, heat sealable coating, and a nonwoven binder, and used as a thermally active binder in thermal transfer release coatings.

Lawter

Filtrez™ 629A

Filtrez™ 629 A is a medium viscosity phenolic modified rosin ester with low solubility in aliphatic solvents. Filtrez 629 A is designed as a workhorse resin which exhibits good gel reactivity with aluminum chelating agents. This resin is a good backbone resin for sheetfed and heatset applications.

LEVACO Chemicals

LUCRAMUL® 1820 Liq.

LUCRAMUL® 1820 Liq. is a non-ionic dispersant and emulsifier.

Swada

Swada T Astral Pink 1

T Astral Pink 1 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Radiant Color

Radglo® RBL-8P7

Radglo® RBL-8P7 is Magenta in color daylight and ultra-violet responsive fluorescent ink base for UV or EB curable ink systems. A dyed/pigmented thermoplastic sulphonamide-melamine- paraformaldehyde resin, dispersed in a vehicle system especially formulated for use in energy curable inks.

Munzing

METOLAT® 288

METOLAT 288 provides excellent surface wetting without generating foam. The product is free of mineral oil and silicones. METOLAT 288 improves good wetting and increases leveling, especially in low viscosity systems.

Michelman

Michem® Lube 160RPH

Michem® Lube 160RPH is APEO-free and formaldehyde-free slip additive made from renewable materials allowing to control the coefficient of friction. This additive enters the formulation of acrylics, PVdC and Michelman low temperature heat seal coatings without affecting bond strength, printability and barrier properties of the coatings. Michem® Lube 160 RPH fully complies with FDA and EU food contact regulations.

Munzing

CERETAN® MT 9115

CERETAN® MT 9115 is a high melting, spherical, micronized Fischer Tropsch wax. This Product is used as a very good scratch resistance, improved gloss, improved slip, good antiblocking and hydrophobizing.

Organic Dyes and Pigments

OrcoSperse™ White R 8004 160 g/L

OrcoSperse™ White R 8004 160 g/L is an organic aqueous pigment dispersions for textiles and nonwovens are specifically designed for printing, padding, garment dyeing, and spray applications. The wide shade range of these product lines, including bright fluorescent and earthtone colors, can be used to develop unique shade and physical special effects–just call our technical staff to develop the perfect shade and process to achieve your desired effect.

Radiant Color

Radglo® JST-15

Radglo® JST-15 is Red in Color with daylight and ultra-violet responsive fluorescent pigments for water- and non polar solvent-based formulations. A dyed/pigmented thermoplastic sulphonamide-melamine-paraformaldehyde resin.

Colorwen International

Colorwen International Orange 234-3

Munzing

METOLAT® 775

MUNZING’s METOLAT 700 series are APEO free wetting agents with excellent equilibrium and dynamic surface tension reduction for a wide range of coating and ink applications. The METOLAT 700 wetting agent product range has varying HLB’s specifically designed to provide optimal performance based on the customer’s system chemistry and application requirements.

Michelman

Michem® Emulsion 93235

Michem® Emulsion 93235 - A phenol-free additive best used in water-based coatings where improved slip, rub resistance, hardness, or block resistance is needed. It provides effective mar resistance in floor polish formulations, and shine and mar resistance in auto polish formulations.

Kuraray

Kuraray Poval™ 56-98

KURARAY POVAL™ 56-98 by Kuraray is a polyvinyl alcohol. It is a fully saponified, odorless, water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. Shows varying degree of polymerization and hydrolysis. Its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, setting speed and rheology. Exhibits good penetration capacity and good adhesion properties. Offers high cohesion & toughness, low electrostatic charging and re-dissolving capacity of the dried film in water. KURARAY POVAL™ 56-98 is designed for use in pressure sensitive adhesive labels. Complies with EU Directive 67/548/EC.

Polymer Chemistry Innovations

Aquazol® 5

Aquazol® 5 is a high-performance water-soluble polymer manufactured and distributed worldwide exclusively by Polymer Chemistry Innovations (PCI). It is an excellent alternative to PVP (polyvinyl pyrrolidone) or PVOH (polyvinyl alcohol) in almost all applications, with the added advantage of thermal stability..

Fluorcolors Pigmentos industria e comercio

Fluorcolor DI 2700

Fluorcolor DI 2700 has an excellent pigmenting power and can be used in a wide range of aqueous formulations including waterborne coating, water based inks, paper coatings, latex balloons, etc. Its cross linked polymeric matrix avoid bleeding in textile inks and gives a good wash resistance. Dispersion has approximately 45% of fluorescent pigment and small quantity of glycol and thickener to assure long term stability. Even after some cycles at -20ºC, product keep its stability and recovery all its properties with a slight homogenization.

Patcham FZC

Pat-Add AF 35

PAT-ADD AF 35 is liquid defoamer for use in waterborne pigment concentrates and industrial coatings. PAT-ADD AF 35 is an oil free, polysiloxane based polymer.

GEO Specialty Chemicals Inc

Bisomer® TEGDMA

Bisomer® TEGDMA (Triethyleneglycol Dimethacrylate).

Eduard Merkle

Ulmer Weiss WL

Ulmer Weiss WL is a fine calcium carbonate powder with a yellow index of 5.2 that is designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paper, paperboard, paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, and polishing mixtures. Ulmer Weiss WL is a solid powder in appearance with a characteristic odor.

Eduard Merkle

Juraperle 130

Juraperle 130 is a coarse calcium carbonate powder designed for use as a filler, pigment, or mixing agent in manufacturing processes. Common applications of this product include paints, varnishes, coatings, printing inks, mastics, soaps, detergents, rubber, cleaning mixtures, and polishing mixtures. Juraperle 130 is a solid powder in appearance with a characteristic odor and oil absorption of 10 g/100g.

Double Bond Chemical Ind. Co., Ltd

DOUBLECURE 1256

Photoinitiator

Munzing

CERETAN® MT 9120

CERETAN® MT 9120 is a high melting, spherical, micronized Fischer Tropsch wax.This product have applications in Paints and coatings and Printing inks. CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Munzing

METOLAT® 362

METOLAT 362 is a non-ionic, silicone free wetting agent with low foam tendency for water based printing inks, adhesives, emulsion paints and water borne clear as well as pigmented coatings. METOLAT 362 improves substrate and pigment wetting. It shows a very broad pH stability.

Cosmo Chemical

COTIOX KA-300

Cotiox KA-300 is a titanium dioxide anatase type fiber grade removing textile gloss and improving textile durability Prominent dispersibility and regular particle sizes without assemblers.

Munzing

CERETAN® MXS 3615

CERETAN® MXS 3615 is a spherical, micronized carnauba wax, coated with silica.In Powder metallurgy Application Powder metallurgy Paints and coatings, such as industrial and wood coatings Printing inks.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

GSI Exim America

CARBODILITE™ V-02-L2

CARBODILITE™ V-02-L2 is a Non-toxic, VOC-free polycarbodiimide based crosslinking agent which helps improve waterborne resins various attributes such as Water, solvent, chemical resistance, Hardness, abrasion, scratch resistance, Adhesiveness. It reacts with carboxyl group even in room temperature, with dosage low as 3~7wt%. Recommended curing condition : Over 80℃ (176°F).

Munzing

CERETAN® MF 5108

CERETAN® MF 5108 is a micronized Polytetrafluoroethylene (PTFE). This product have applications inPaints and coatings, Printing inks and Technical applications.CERETAN ® micronized waxes are predominantly produced using our highly advanced spraying technology leading to spherical particles. The spherical shape and the particles’ even surface help the dispersing process, reduce wax usage as well as dust formation. We guarantee D99 values to minimize oversized particles in your formulation.

Kuraray

Kuraray Poval™ 35-80

KURARAY POVAL™ 35-80 by Kuraray is a partially saponified polyvinyl alcohol (PVOH) grade. It is used as an adhesive promoter. It is suitable for modification of emulsion adhesives and remoistenable adhesives in the paper processing industry. It is used in postage stamps and labels. Aqueous solution of KURARAY POVAL™ 35-80 can be added to polymer emulsion which is already stabilized with polyvinyl alcohol to extend the open time, increase setting speed and influence the rheology. Complies with EU Directive 67/548/EC regulation.

Lawter

OPTILITH™ TRG

Optilith™ TRG A quickly reduces the initial tack without “destroying” the rheological properties of ink. Additionally, it flattens the tack curve through added solubility, providing greater tack stability and improved transfer. Optilith TRG A can be used in all oil based offset inks including heatset, sheetfed, web no-heat and other specialty lines.

Radiant Color

Radglo® GFS-18

Radglo® GFS-18 is UV Blue in color with daylight and ultra-violet responsive fluorescent soluble toner for solvent-based formulations. A dyed/pigmented thermoplastic glycol-uril- sulphonamide- paraformaldehyde resin.

Munzing

AGITAN® E 255

AGITAN E 255 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN E 255 is resistant to alkaline and acid environment. It can be used between pH 2 and 11.

Lawter

OPTILITH™ 4A

Optilith™ 4 A is a Lawter™ water fighter compound. Optilith 4 A is a high solids, low volatile, lubricating compound. Optilith 4 A effectively reduces water pick-up in lithographic inks at 0.5 to 2% usage levels. It is functional across a broad range of fountain solutions and can be added during formulation or as a press-side additive.