Flexible Packaging Adhesives
418 products found for Flexible Packaging Adhesives in Tapes, Labels & Adhesives
Antimussol® Z 70
Antimussol® Z 70 is a liquid foam control agent with very low silicone content for adhesives, coatings and inks based on synthetic latex emulsions. Antimussol® Z-70 is very effective during the mixing, dispersing and milling processes. Due to its components, it is easily dispersed and acts immediately to release entrapped air in foam bubbles and to prevent undesired foam built-up. It maintains its efficiency during long periods of agitation. The recommended dosage is 2.4-3.2 kg of Antimussol® Z-70 for 1000 liters of paint. This amount is sufficient to control the foam efficiently.In adhesives we recommend dosages between 1-2 % of Antimussol® Z-70 based on the total latex solids. This defoamer can be used as it is or as a water dispersion.
UNI-REZ 110 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 110 polyamide resin was developed for release lacquers but can also be used as a modifying resin to improve hardness.
UNI-REZ 2930 polyamide resin is a co-solvent type resin which is soluble in alcohols, but typically requires mixtures of aliphatic hydrocarbons and alcohols for gel stability. UNI-REZ 2930 polyamide resin provides fast solvent release and good grease resistance in flexographic / gravure inks for plastic substrates and is especially effective as an overprint lacquer.
SUKOREZ® SU-640 is a white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers such as Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA), as well as polypropylene (PP) modifier. SUKOREZ® SU-640 is water white cycloaliphatic hydrocarbon resin. The major usage are a modifier in blends with polymers for filmic application and tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.
Kuraray Poval™ 8-88
KURARAY POVAL™ 8-88 by Kuraray is a polyvinyl alcohol (PVOH) having varying degree of polymerization and hydrolysis. It is a water-soluble polymer manufactured by alcoholysis of polyvinyl acetate. It is notable for its good bonding strength and pigment binding capacity because PVAs have such good cohesion and good adhesion to fibers, fillers as well as pigments. KURARAY POVAL™ 8-88 is used in a similar manner as natural products such as casein as well as starch and its degraded derivatives (for example dextrin) as raw material for the production of aqueous adhesive solution. In comparison to dextrin and casein it has the advantage of a more uniform chemical structure and greater adhesion, being obtained with minimum raw material requirements. It features water-solubility, excellent film forming characteristics, high tensile strength and elasticity, as well as resistance against organic solvents and dispersing power. For the modification of aqueous adhesives its aqueous solution can be added to polymer emulsions already stabilized with polyvinyl alcohol which affects the extension of the open time, increase of the setting speed and influence on the rheology. It is biodegradable and recyclable. KURARAY POVAL™ 8-88 is used in producing silicon base paper that are further used as release paper for PSA labels and also in remoistenable adhesives which are employed mainly in the paper processing industry, films applications.
Elvanol™ 90-50 by Kuraray is a fully hydrolyzed, medium-to-low viscosity polyvinyl alcohol. Provides high film strength and binding power in relatively low -viscosity systems. Offers oil-, grease-, water and solvent resistance. It combines efficient binding with excellent high shear rheology, controls backside lint and surface debris and provides superior holdout. It is compatible with modified starches. Used in adhesives for porous substrates including paper and paperboard, hot-water soluble film, and as a binder for pigments or other solid particles. It is particularly useful as a pigment binder for ceiling tile primers. Elvanol™ 90-50 complies with FDA regulation.
AdvanSix Technical Acetone
AdvanSix Technical Acetone is produced to the highest standards for key industries including Building & Construction, Agriculture & Feed, Automotive & Transportation, Adhesives & Sealants, Paints & Coatings, Electrical & Electronics, Packaging, Personal Care, and Pharmaceuticals & Healthcare. It offers low Benzene and water content. AdvanSix offers grades that meet high purity NF and ACS certification requirements and low water requirements. AdvanSix High Purity Acetone can be used as an intermediate in the production of:Building & ConstructionConstruction adhesives, DIY and consumer repair adhesives, building envelope materials, exterior insulation and finishing systems, glazing and window elements, pipes and plumbing cement systems, roofing sealants and caulks.Agriculture & FeedAgricultural pest control and industrial weed and vegetation control products.Automotive & TransportationAftermarket parts, refinish exterior and body parts, interior parts and lighting.Adhesives & Sealants Packaging and assembly adhesives and sealants,Paints & CoatingsAerospace, automotive OEM & Refinish, marine, metal, coil, container, rail, mass transit, off road and commercial vehicle, infrastructure, road and paving, architectural, decorative, flooring, furniture, wood and finish, and appliance and consumer goods coating applications.Electrical & ElectronicsDevices and assemblies for automotive and consumer electronics, printed circuit boards and other semiconductor manufacturing applications.PackagingFilm and foil, overprint varnishes, primers, lacquers and other aerosol coating applications.Personal CareNail care applications.Pharmaceuticals & HealthcareOral and dental drug delivery, tubing and fluid handling systems, as excipient, coating and processing aids, and in API pharmaceutical manufacturing.
Nipacide® BK is an in-can biocide basen on Hexahydrotriazine HHT . Nipacide® BK is an aqueous based low toxicity biocide developed for the complete in-can protection of water based products. Nipacide® BK is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide® BK can be used over a wide pH and temperature range.
UNI-REZ 111 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.
Nipacide® BNPD is an in-can biocide based on Bronopol. Nipacide® BNPD is recommended for preservation of a wide range of applications including Paints, varnishes, adhesives, emulsions polymers , slurries, metal working fluids and home care products where the protection against bacteria and fungi is required in humid state in can protection . Nipacide® BNPD is especially effective against bacteria including Pseudomonas sp. and sulphate reducing bacteria SRB .
Exolit® OP 935
Exolit® OP 935 is a white, fine-grained powder based on an organic phosphinate. The product is not hygroscopic and it is insoluble in water and common organic solvents like acetone, dichloromethane, MEK, toluene. Exolit® OP 935 can easily be dispersed in solvents like acetone or MEK.
Nipacide® CFX is an in-can biocide based on formaldehyde + chloromethyl and methylisothiazolinone. Nipacide® CFX is water based low toxicity isothiazolinone/ formaldehyde donor biocide, developed for the complete in-can and head space protection of water based products. Nipacide® CFX is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. When products are prone to surface contamination by fungi and head space protection is required, Nipacide® CFX should be the biocide of choice. Nipacide® CFX is effective against a wide range of spoilage organisms effective over a wide pH and temperature range.
Exolit® OP 1314
Exolit® OP 1314 is a non-halogenated flame retardant based on organic phosphinates. The product achieves its flame retardant effect through intumescence. The thermoplastic polymer with Exolit® OP 1314 foams and crosslinks on exposure to flame and forms a stable char at the surface acting as a barrier. The protective layer provides a heat-insulating effect, reduces oxygen access and prevents dripping of molten polymer. Compared to Exolit® OP 1312, the product gives an improved thermal stability of polyamide compounds. Exolit® OP 1314 is a white powder.
UNI-REZ 119 polyamide resin is an alcohol soluble / co-solvent type resin with excellent solvent release and blocking properties. UNI-REZ 119 polyamide resin was developed for release lacquers and has the lowest solution viscosity but fast solvent release.
Gabriel Performance Products
Gabriel® PKHS-30 PMA
Gabriel Phenoxy PK™HS-30 PMA is a 30% NV solution of Phenoxy resin in PM acetate (PMA or Propylene Glycol Methyl Ether Acetate). Phenoxy resins (polyhydroxyethers) are tough, ductile, amorphous, thermoplastic polymers having excellent thermal stability, adhesive strength, and vapor barrier properties. Phenoxy resins may be crosslinked by reacting its hydroxyl functional groups with isocyanates, melamine resins, or phenolic resins. Crosslinked phenoxy resins exhibit excellent chemical resistance, hardness, and adhesion on many substrates including steel, aluminum, glass, carbon fibers, and plastics such as nylon and polyester (PET). PKHS-30 PMA can be reduced with additional PMA to attain lower viscosities; the addition of MEK will reduce viscosities at a faster rate. The addition of diluents like xylene or toluene can also be useful. Coatings of PKHS-30 PMA exhibit excellent levels of flexibility and toughness when appropriately cured.
SYLVARES™ TP 2040
SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.
SYLVALITE™ RE 10L
SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.
ZINPLEX 15 contains 13.2% zinc metal ions that can be used to crosslink aqueous carboxylated polymers. This crosslinking or complexing takes place as the coating dries at either room temperature or under forced dry or higher baking conditions.
Velsiflex® 342 is one of the most popular liquid plasticizers. It is a high-solvating plasticizer containing mostly dipropylene glycol dibenzoate. It is used in a wide variety of applications, including caulk, adhesives, resilient flooring, PVC-coated fabrics and artificial-leather cloth. In PVC, it acts as a medium- viscosity high solvator that saves energy and improves process ability. Vinyl applications using Velsiflex 342 have excellent resistance to extraction from solvents and oils. It also works with vinyl to make it UV – light-degradation resistant and stain resistant.
SYLVARES™ TR 7125
SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.
Exolit® OP 950
Exolit® OP 950 is a white granular powder based on an organic phosphinate. The product is not hygroscopic and slightly soluble both in water and in common organic solvents. It melts at 200°C.
Polyglykol® 9000 S
Polyglykol® 9000 S is a polethylene glycol with a mean molecular weight of 9000. It is a solid in flake form. Polyglykol® 9000 S is used as a chemical intermediate for paint additives.
Nipacide® BIT 10 W
Nipacide® BIT 10 W is an in-can biocide based on BIT. Nipacide® BIT 10 W is a light color, 10% active, VOC free, water-based solution of 1,2-benzisothiazolinone. Nipacide® BIT 10 W is a low toxicity biocide developed for the complete in-can protection of water-based products. Nipacide® BIT 10 W is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide® BIT 10 W should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
Exolit® OP 1240
Exolit® OP 1240 is a flame retardant based on an organic aluminum phosphinate which is a thermally stable white solid without any hazard classification or labeling. It can be easily compounded into polyesters and subsequently processed again to manufacture flame retarded parts used in consumer or industrial products.
Nipacide® BIT AS 20
Nipacide® BIT AS 20 is an in-can biocide based on BIT. Nipacide® BIT AS 20 is a stable, free flowing 20% aqueous dispersion of 1,2-benzisothiazolinone and is a low toxicity biocide developed for the complete in-can protection of water based products. Nipacide® BIT AS 20 is effective against a wide range of microorganisms including gram positive and gram negative bacteria, yeast and fungi. Nipacide® BIT AS 20 should be the biocide of choice for products with pH >8 and production temperatures of >40 C.
SUKOREZ® SU-525 is white thermoplastic resin obtained from the copolymerization and hydrogenation of C5 aliphatic olefin and diolefin generated in the thermal-depolymerization process of naphtha. This product offers excellent thermal stability and compatibility with various elastomers, including Ethylene-Vinyl-Acetate (EVA) and Styrene-Isoprene-Styrene copolymer (SIS) so this product is used as tackifier resin for hot melt adhesive (HMA) and hot melt pressure sensitive adhesive (HMPSA). SUKOREZ® SU-525 is water white cycloaliphatic hydrocarbon resin. The major usage is a tackifier for EVA, SIS, SEBS block copolymers, metallocene polyolefins and APAO.
SYLVARES™ TR B115
SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.
UNI-REZ 2215 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.
SYLVALITE™ RE 100L
SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.
AGITAN 218 is a defoamer for all common emulsion systems.
only available in Asia! A highly effective all purpose defoamer for printing ink formulations, such as corrugated, film & foil, and screen ink formulations. Also provides excellent initial foam knockdown when used as a press-side defoamer.
HIKOREZ® A-1100 is a pale yellow thermoplastic resin obtained from the polymerization of C5 aliphatic olefin and diolefin generated in the thermal-cracking process of naphtha. This resin provides well-balanced adhesion properties such as adhesive strength, bond strength and cohesive force required for pressure sensitive adhesive (PSA), and is mainly used as tackifier and hot melt adhesive (HMA) for pressure sensitive adhesive. This resin also can be used as the binder for hot melt road marking (HMRM).
UNI-REZ 2521 (formerly UNI-REZ 521) thermoplastic polyamide resin is designed to impart a high degree of thixotropy to alkyd resins. Thixotropy can be achieved by reacting UNI-REZ 2521 with the alkyd resin at temperatures between 190-210°C. UNI-REZ 2521 can be easily processed and achieves its clear point on dilution before attainment of maximum thixotropy.
UNI-REZ 2218 polyamide resin is an alcohol soluble type resin that is used for flexographic printing. It has balanced properties making it a good choice for general purpose flexographic surface printing.
UNI-REZ 2633 hot melt polyamide adhesive is a resin based on dimer acid. UNI-REZ 2633 hot melt polyamide adhesive has good low temperature flexibility and adhesion to various plastic substrates.