products in Other Tapes, Labels & Adhesives

Monument Chemical

Monument Chemical Tetrahydrofuran (THF)

Monument Chemical Tetrahydrofuran (THF) is a clear, colorless liquid with an ether‐like odor. The principal end uses of THF include PTMEG, pharmaceutical solvent, adhesives, PVC cement and magnetic tape. Due to its' tendency to form peroxides during storage, THF is inhibited with BHT.

Bitoner Resin

Bitoner Resin BT-1115

Bitoner Resin BT-1115 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Kraton

SYLVALITE™ RE 85GB

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

Munzing

AGITAN® DF 6420

AGITAN DF 6420 is a defoamer for solvent based systems. It provides the following properties: Versatile efficiency in non aqueous systems; Can be used as supplied; Easily disperses in most organic solvents.

Advanced Petrochemical Company

Advanced-PP 1102K

Advanced-PP 1102K is a polypropylene homopolymer for extrusion and thermoforming applications.extremely low water carry-over is a special advantage for the production of raffia tapes.

Kraton

SYLVALITE™ RE 88F

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

Kraton

SYLVARES™ TP 2040

SYLVARES TP 2040 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties.

Kraton

SYLVALITE™ RE 10L

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

Kraton

SYLFAT™ 2LT

SYLFAT 2LT Tall Oil Fatty Acid (TOFA) is refined from selected crude tall oil grades aimed to achieve a low temperature performance, under carefully controlled process conditions and extended analysis for consistent quality. The utility of SYLFAT 2LT can be found in the long carbon chain (C18), acid function of the carboxyl group (COOH), unsaturation of the double bonds and consistently low cloud point and pour point. SYLFAT 2LT is developed for applications requiring low temperature properties.

Kraton

SYLVARES™ TR 7125

SYLVARES TR 7125 polyterpene resin is a thermally stable polyterpene tackifier that can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. It may also be used in investment casting applications.

Kraton

SYLVARES™ TP 7042

SYLVARES TP 7042 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin has a high terpene level, which exhibits excellent tackifying, flexibility, and compatibility properties for use in styrenic-block-co-polymer.

Kraton

SYLVARES™ 1150

SYLVARES 1150 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This high heat resistance resin exhibits excellent compatibility and tackifying properties for use in styrenicblock-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Kraton

SYLVARES™ TR B115

SYLVARES TR B115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance.

Bitoner Resin

Bitoner Resin BT-2104

Bitoner Resin BT-2104 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Kraton

SYLVARES™ 6100

SYLVARES 6100 tackifier is a light color, low odor, heat stable aromatic modified terpene resin, which provides an excellent balance of properties when compounded with styrenic block copolymers or ethylene vinyl acetate copolymers.

Kraton

SYLVALITE™ RE 100L

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Kraton

SYLVARES™ TR A25L

SYLVARES TR A25L polyterpene resin is a clear, light-colored, low molecular weight resin. This liquid resin may be used as a tackifier in a broad range of adhesive systems or as a modifying resin with other tackifiers to improve adhesion to hard-to-bond surfaces. SYLVARES TR A25L liquid polyterpene can also be used to improve low temperature properties.

Kraton

SYLVALITE™ RE 100F

SYLVALITE RE 100F rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100F exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

Kraton

SYLVALITE™ 9000

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

Kraton

SYLVATAC™ RE 98

SYLVATAC RE 98 rosin ester is an economical pentaerythritol ester of tall oil rosin. This rosin ester is a broadly compatible tackifier. This is a versatile product for any application that can tolerate a slightly higher formulation color.

Phillips66

Copylene® CH005

COPYLENE® CH005 is a fractional melt flow polypropylene homopolymer resin available in pellet form. It is made with a non-phthalate catalyst.

Bitoner Resin

Bitoner Resin BT-2110

Bitoner Resin BT-2110 is a thermoplastic aliphatic resin obtained from polymerizing unsaturated aliphatic petroleum feedstock.

Valpac

Valpac V-TAC 5951

V-TAC™ 5951 dispersion is an aqueous, 50% solids, solvent-free anionic dispersion based on an aliphatic hydrocarbon resin compatible with the following latexes: acrylic, styrene-butadiene rubber, neoprene and natural rubber. V-TAC™ 5951 enhances adhesion to polyolefin substrates and is highly resistant to acids and alkalis. V-TAC™ 5951 can be used for a variety of applications and offers several benefits as outlined below

HPL Additives

KINOX 68

KINOX 68 is for good processing stability, white, free flowing crystalline powder/granules.

Kraton

AQUATAC™ 2600

AQUATAC 2600 experimental resin dispersion is an alkyl phenol free rosin ester dispersion designed for high-performance waterborne pressure sensitive adhesives using the latest in surfactant technologies. This high solids tackifier dispersion is designed for use in Pressure Sensitive Adhesive (PSA) applications and combines high heat resistance with an excellent balance of shear, tack and peel properties.

Kraton

SYLVATAC™ RE 5S

SYLVATAC RE 5S liquid rosin ester has broad compatibility with polymers used in flooring and construction applications. With an optimized mixture of resins and plasticizers, SYLVATAC RE 5S can be used as a self-emulsifying blend for water-based acrylic polymers.

Kraton

SYLVARES™ 540

SYLVARES 540 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. The phenolic component improves compatibility with high polarity polymers. The low Tg of SYLVARES 540 resin improves elasticity at low temperature.

Jesons Industries Ltd

BONDEX® A-117

Bondex® A-117 is based on Acrylic Polymer Emulsion. It has very high tack, good Shear Strength with instant bond & non-migrating properties, due to which the long term durability is better. It is mainly used for B.O.P.P. Packaging Tapes / OPP carton sealing tape making. It gives peel strength of min 500 – max 750 gm/inch at 30⁰C after application on BOPP film (18 – 25 micron coating) and shear more than 400 min (dry weight).

Kraton

SYLVARES™ 1095

SYLVARES 1095 tackifier is a thermoplastic terpene phenolic resin designed for tackifying hot melt adhesives to provide superior adhesion and thermal-stability properties. This low softening point terpene phenol resin exhibits excellent compatibility and tackifying properties for use in styrenic-block-co-polymers and for solvent acrylic based pressure sensitive adhesives. This resin can also be used to tackify metallocene polymers.

Kraton

SYLVALITE™ RE 110L

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

Jesons Industries Ltd

BONDEX® OC

BONDEX® OC is based on Acrylic polymer Emulsion. It has very high peel adhesion, extremely soft feel & used mainly for double-sided tissue tapes & for non-porous / non-polar surfaces like HMHDPE plastic in cold weather upto 0ºC temperature. It has excellent tack value, which forms instant bond with non-migrating properties. Ideally suited on labels for round surface plastic containers in cold climate.

Kraton

SYLVARES™ 525

SYLVARES 525 AMS (alpha methyl styrene) Phenolic resin is a water white aromatic hydrocarbon resin with good oxidative stability. This product contains a small amount of phenol modification.

Kraton

SYLVARES™ TR M1115

SYLVARES TR M1115 polyterpene resin is a biorenewable tackifier made from selected terpene monomers. This product can be used to tackify natural rubber, synthetic elastomer, and some polyolefin adhesives. The aliphatic nature of this product allows compatibility with the mid-block of styrene-isoprene-styrene block copolymers while limiting interaction with the styrenic endblocks providing a balance of tack, peel, cohesive strength, and heat resistance. It has a narrower molecular weight distribution, which improves compatibility with some adhesive elastomers.

Advanced Petrochemical Company

Advanced-PP 1102L

Advanced-PP 1102L is a polypropylene homopolymer with general extrusion additivation with low water carry over. It is specificially suited for Raffia & Thermoforming Applications.

Hitac Adhesives and Coatings

Hitac Adhesives and Coatings RA-33W

Hitac Adhesives and Coatings RA-33W is a second generation water based release agent used in a variety of pressure sensitive adhesive tapes including OPP packaging tapes and polyethylene-backed diaper fastening tapes with adhesives based on SIS block copolymers, SBR and natural rubber.

Braskem America

Braskem America C758-80NA

Braskem C758-80NA is a polypropylene impact copolymer (ICP) offering very easy mold filling with good balance of impact strength and stiffness. It contains a nucleating and antistatic additive.