Products in Base Chemicals & Intermediates: High Reactivity

Cardolite® NX - 9008 is a tri-functional CNSL polyol offering high Tg, excellent mechanical properties, and outstanding bond strengths in polyurethane applications.

Cardolite® NX - 9201LP is a polyester diol based on cashew nutshell liquid technology.

Cardolite® NX - 9203LP is a polyester diol based on cashew nutshell liquid technology.

4-HBA is used for acrylic resins, adhesives, UV diluent. It is water miscible. Its OH group of co-polymer is higher reactivity than the other hydroxyalkyl monomers like HEMA and HEA because of the longer alkyl chain between OH group and polymer main chain. The 2K urethane painting with 4-HBA has higher scratch resistance and stronger mechanical properties because it can form higher crosslinking density due to highly reactive OH group. 4-HBA is also used for UV diluent application because the lower toxicity than the other hydroxyalkyl acrylates, like HEA and HPA which are classified as CMR substances in most of countries.

K-FLEX® 188 is a highly reactive, aliphatic polyester diol which is recommended for aminoplast or isocyanate crosslinked coatings, inks, sealants, elastomers, and adhesives. K-FLEX® 188 is the most versatile polyester diol in the K-FLEX® line.

Blue Tungsten Oxide is a blue crystalline powder for the production of tungsten metal powders used in hard metals, lamp wires or heating wires.

Pometon CULT12 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Tungstic Acid is a bright yellow fine powder for the production of tungsten metals and catalysts.

Sodium Tungstate is a white crystalline powder for the production of luminophores, phosphorus, pigments and catalysts.

Nobian Sodium hypochlorite is a clear, slightly yellowish solution with distinct odor. It is produced by reacting chlorine with a solution of sodium hydroxide.

Novamet Specialty Products Black Nickel Oxide Grade A is a unique fine powder oxide of exceptionally high purity and particle surface characteristics. It is made using a proprietary process using very high purity carbonyl nickel powder as the feed material.

Pometon CU LT8 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Yellow Tungsten Oxide is a yellow powder, sometimes with a touch of green, for coating applications with electroluminescence and for the production of tungsten metal powders used in hardmetals, lamp wires or heating wires.

Pometon CU LP0 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Pometon CU LT16F is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Pometon CU LT16 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

G Vogler BV Black Nickel Oxide – Grade A Is an ultra-high purity product with approximately 77% Nickel content. Used in the glass- and electronics industry. Seido Black Nickel Oxide is of very high purity and is a high surface area powder. Seido has a unique production process to make this very special product. Typical BET surface area values are about 75m2/g. Black Nickel Oxide is produced in 2 grades – A and F – differing mainly on particle size.

Pometon CU LNP0 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Pometon CU LT10 is produced by electrolysis, starting from Cu cathodes, this powder has a dendritic morphology and a very high chemical purity.

Ammonium Metatungstate (AMT) is a grayish white crystalline powder which is highly soluble in water and used for the production of tungsten metal powder and catalysts.