Products in Elastomers: Initiator

Syna Pl 1173 is a colorless to light yellow transparent liquid content.

PEROXAN AZDN is 2,2'-Azodiisobutyronitrile 98%, Powder.PEROXAN AZDN is used for the (co)polymerization of styrene, vinylchloride, vinylidenechloride, acrylonitrile, acrylates and methacrylates.

Otsuka Chemical ACVA is used for water soluble application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

PEROXAN CND is Cumyl peroxyneodecanoate 75%, Solution in odorless white spirits.PEROXAN CND is used for the (co)polymerization of ethylene, vinylchloride and vinylidenechloride.

PEROXAN DA is Di-tert-amyl peroxide 93%, Liquid.PEROXAN DA is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates. PEROXAN DA is also used for the production of controlled rheology polypropylene (CR-PP).PEROXAN DA is used for the curing of unsaturated polyester resins and polymerization of styrene alkyde mixtures.

PERGAPROP HX-20 PP is 2,5-Dimethyl-2,5-di-(tert-butylperoxy)-hexane 20%, Granules with Polypropylen.PERGAPROP HX-20 PP is used for the production of controlled rheology polypropylene (CR-PP).

PEROXAN BEC is tert-Butyl peroxy 2-ethylhexyl carbonate 95%, Liquid.PEROXAN BEC is used for the (co)polymerization of ethylene, styrene, acrylates and methacrylates.PEROXAN BEC is used for the curing of unsaturated polyester resins.PEROXAN BEC is used for the crosslinking of EPDM, EPM, NBR and EVA (Ethyl Vinyl Acetate).

PEROXAN DB-30 is Di-tert-butyl peroxide 30%, Solution in odorless white spirits.PEROXAN DB-30 is used for the (co)polymerization of ethylene.

PEROXAN BIC is tert-Butyl peroxyisopropylcarbonate 75%, Solution in odorless white spirits.PEROXAN BIC is used for the (co)polymerization of styrene, acrylates and methacrylates.PEROXAN BIC is used for the curing of unsaturated polyester resins.

PEROXAN NPO-50 WN-A is Di-(3,5,5-trimethylhexanoyl)-peroxide 50%, Emulsion in water and methanol.PEROXAN NPO-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

PeroxyChem Potassium persulfate is used as an initiator for emulsion polymerization reactions, in the preparation of acrylic, vinyl, styrene, neoprene, styrene-butadiene and other resins. It is also used in depolymerization in modification of starch, as a booster in hair bleaching formulations in cosmetics and as a gel breaker in the oil and gas industry.

PEROXAN AHP is tert-Amyl hydroperoxide 80%, Solution in water.PEROXAN AHP is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/ butadiene/styrene (ABS rubber).

PEROXAN AEC is tert-Amyl peroxy 2-ethylhexyl carbonate 95%, Liquid.PEROXAN AEC is used for the (co)polymerization of styrene, acrylates and methacrylates.

PEROXAN PK234 V is 2,2-Di-(tert-butylperoxy)-butane 50%, Solution in odorless white spirits.PEROXAN PK234 V-is used for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates.

Metox 50 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. They are suitable for manual and spray lamination. Due to the lowered water content Metox-50 is recommended for hardening polymer concrete and some concrete polyester varnishes and others.

PEROXAN DB-50 is Di-tert-butyl peroxide 50%, Solution in odorless white spirits.PEROXAN DB-50 is used for the (co)polymerization of ethylene.

Syna Pl 6976 is a mixed type triarylsulfonium hexafluoroantimonate salts.

Pentox 40 is peroxide initiator for copolymerization of unsaturated resins polyester. They are mainly used with cobalt accelerators at temperature surroundings. These initiators are particularly suitable in those applications where it is required fast molding with transfer of the core, for example cold forming or in injection molding techniques. Compared to the Metox-50 hardener, they contain a lower amount of active oxygen. However, they show a similar one gel time and a greater exothermic effect, therefore, they are not recommended for use in production too thick layers in one operation, as well as for hardening gel coats.

Syna Pl TPO is a slightly yellow crystalline powder.

Banac NS has chemical composition of N-tertbutyl 2-benzothiazole sulfenamide and used as an accelerator.

Cetox 12OB RED is a peroxide initiator for copolymerization of unsaturated resins polyester. It is mainly used with cobalt accelerators at temperature surroundings. Suitable for manual and spray lamination. In relation to the hardener Cetox-20OE contains a lower amount of active oxygen, shows a longer copolymerization time, and also less exothermic effect.

PEROXAN PAM is p-Menthan hydroperoxide 50%, Solution.PEROXAN PAM is used for the copolymerization of styrene/butadiene (SBR rubber) and acryl nitrile/butadiene/styrene (ABS rubber).

Banac TMTM has chemical composition of Tetramethyl thiuram monosulfide and used as an accelerator.

Syna Pl 6992 is a cationic photoinitiator containing a mixture of triarylsulfonium hexafluoroantimonate salts in propylene carbonate. Syna PI 6992 photoinitiator is used to UV-cure CYRACURE cycloaliphatic epoxide resins, vinyl ethers and other cationically curing materials.

PEROXAN PA-50 is tert-Butyl peroxyacetate 50%, Solution in odorless white spirits.PEROXAN PA-50 is used for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates.

PEROXAN CND-50 WN-A is Cumyl peroxyneodecanoate 50%, Emulsion in water in water and methanol.PEROXAN CND-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

PEROXAN LP-40 W is Dilauroyl peroxide 40%, Suspension in water.PEROXAN LP-40 W is used for the (co)polymerization of vinylchloride, vinylidenchloride, acrylates and methacrylates.

PEROXAN PK234 W is 2,2-Di-(tert-butylperoxy)-butane 50%, Solution in white oil.PEROXAN PK234 W is used for the (co)polymerization of ethylene, styrene, acrylonitrile, acrylates and methacrylates.

PERGAPROP BIB-20 PP-FN is Di-(2-tert.-butyl-peroxyisopropyl)-benzene 20%, Granules with Polypropylen.PERGAPROP BIB-20 PP-FN is used for the production of controlled rheology polypropylene (CR-PP).

PEROXAN PK122 V is 1,1-Di-(tert-butylperoxy)-cyclohexane 50%, Solution in odorless white spirits.PEROXAN PK122 V is used for the (co)polymerization of styrene, acrylonitrile, acrylates and methacrylates.PEROXAN PK122 V is used for the curing of unsaturated polyester resins.

Otsuka Chemical AIBN is used at medium temperature polymerization application. Technology in fabrics, resins, paints and adhesives is supported by catalyst chemistry in polymer chemistry. Otsuka Chemical contributes polymer industries by introducing variety of AZO type initiators in order to meet request from polymer industry with our technology.

PEROXAN C124 is Dicetyl peroxydicarbonate 95%, Flakes.PEROXAN C124 is used for the (co)polymerization of vinylchloride and vinylidenechloride.

Metox VLHP90 is a liquid peroxide initiator based on peroxides methyl ethyl ketone in an Ōalan plasticizer. Compared with the standard MEKP, the initiator contains a reduced content of hydrogen peroxide, water and methyl ethyl ketone. May be used for curing unsaturated polyester resins (UPR), gelcoats, in the presence of cobalt accelerator. Especially recommended for curing gel coats due to very low content of hydrogen peroxide, water and methyl ethyl ketone. This high purity initiator can be used wherever the use of Permix-MC96 is demonstrated too fast gelling. Compared to Metox-BW85, it has a shorter gel and hardening time.

PEROXAN EPC-50 WN-A is Di-(2-ethylhexyl)-peroxydicarbonate 50%, in water and methanol.PEROXAN EPC-50 WN-A is used for the (co)polymerization of vinylchloride and vinylidenechloride.

PEROXAN PK295 V-75 is 1,1-Di-(tert-butylperoxy)-3,3,5-trimethylcyclohexane 75%, Solution in odorless white spirits.PEROXAN PK295 V-75 is used for the (co)polymerization of styrene, acrylonitrile, acrylates and methacrylates.PEROXAN PK295 V-75 is used for the curing of unsaturated polyester resins.

PeroxyChem Sodium persulfate acts as a polymerization initiator in polymer chemistry, as an etchant and cleaner in the manufacturing of printed circuit boards, as a booster in hair bleaching formulations in cosmetics.