Products in Elastomers: Reinforcement

MultiTech MultiFunctional J is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

Reinforcing Elastomers Resin A Styrene Butadiene Resin (SBR) S-6H by Valex Group is commonly used as Reinforcing Resin for a variety of applications. It is available in Powder form.

HDK® T30 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30 is a white colloidal powder of high purity. It finds application in inkjet paper, make-up, powder coatings, printing inks, and rheology control.

HDK® H15 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H15 is commonly utilized as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. Additionally, it serves as a reinforcing filler in elastomers, particularly silicone elastomers. Moreover, HDK® H15 functions as a free flow additive in the production of technical powders.

HDK® N20Plus is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20Plus is a white colloidal powder of high purity. It finds applications in offset printing and powder coatings.

HDK® N20 is a synthetic, hydrophilic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. This white colloidal powder offers high purity and serves multiple purposes. One of the primary applications of HDK® N20 is as a thickening and thixotropic agent in organic systems such as unsaturated polyesters, coatings, printing inks, adhesives, and cosmetics. Additionally, it functions as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® H2000 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H2000 is primarily used as a reinforcing filler in silicone-elastomers, enhancing their properties. Furthermore, it serves as a free flow additive in the production of technical powders and finds application as an additive in antifoam agents.

HDK® V15 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® V15 finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

HDK® T30P is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30P is a white colloidal powder of high purity. It serves as a reinforcing filler in elastomers, particularly silicone elastomers. However, it is not suitable for use in pharmaceuticals, food, and feed applications. It is essential to achieve a good dispersion of HDK® T30P to ensure optimal performance.

HDK® T30Plus is a synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® T30Plus is a white colloidal powder of high purity. It finds applications in inkjet paper, makeup, powder coatings, printing inks, and rheology control.

HDK® H20 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H20 is used as a thickening and thixotropic agent in coatings, printing inks, adhesives, cosmetics, and other applications. It also serves as a reinforcing filler in elastomers, particularly silicone-elastomers. Additionally, HDK® H20 acts as a free flow additive in the production of powder coatings.

HDK® H30 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H30 finds application as a thickening and thixotropic agent in various industries including coatings, printing inks, adhesives, cosmetics, and others. Additionally, it is utilized as a reinforcing filler in elastomers, specifically silicone-elastomers. Moreover, HDK® H30 acts as a free flow additive in the production of powder coatings.

HDK® S13 is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® S13 is a white colloidal powder of high purity. It finds application in inkjet paper and pulp, paper & printing processes.

HDK® N20P is a hydrophilic, synthetic, amorphous silica produced through flame hydrolysis. It is a standard product widely used in various industrial applications. HDK® N20P is commonly applied in the electronics industry as a white colloidal powder of high purity.

HDK® T40 is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity commonly used in various industrial applications. HDK® T40 finds applications in flexographic printing, gravure printing, industrial wood coatings, inkjet paper, offset printing, and printing inks.

HDK® V15D is a standard synthetic, hydrophilic, amorphous silica produced via flame hydrolysis. It is commonly used in various industrial applications. HDK® V15D finds its application as a thickening and thixotropic agent in silicone sealants. Additionally, it is used as a reinforcing filler in elastomers, particularly silicone elastomers.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

ULTRASIL® VN 2 is primarily used at high filler loadings in PCT (passenger car tire) tread compounds without any loss in processing behavior. This silica is particularly well-suited for use in combination with bifunctional organosilanes, which help to optimize wet and winter properties. Additionally, high static moduli are observed with and without additional organosilanes. This is why ULTRASIL® VN 2 is also widely used in other mechanical rubber goods. It is available in both powder and granulated silica forms.

ULTRASIL® 880 is a precipitated silica that contains a calcium admixture and has a very low specific N2 surface area of approximately 35m²/g. When added to rubber mixtures, it provides excellent residual deformation and extrusion characteristics. ULTRASIL® 880 also enables the creation of profiles with minimal swelling and a very smooth surface. Even EPDM mixtures with extremely high filling grades (up to 200 parts per hundred of rubber) can still be processed with ease. In white mixtures, ULTRASIL® 880 can be used in partial substitution for titanium dioxide. The impact of sulfur adsorption is negligible.

ULTRASIL® VN 3 has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 is widely used in different bonding systems.

ULTRASIL® 7000 GR is a highly reinforcing silica that has been specifically developed for use in low-rolling-resistance passenger car tire tread compounds, commonly referred to as "Green Tires". This silica has a specific BET surface area of approximately 175 m²/g, and it exhibits excellent incorporation and dispersion behavior. When used in tire tread compounds, it imparts high abrasion resistance, excellent rolling resistance, and improved wet traction.

AEROSIL® OX 50 is a fumed silica with a very low specific surface area, low thickening, and high purity. The product can be used as an additive or as a raw material. In polymer composites, high filler loading can be achieved, making it possible to control essential characteristics of polymers.

ULTRASIL® 360 is a semi-active precipitated silica with a very low N2 surface area of approximately 55m²/g. It is particularly well-suited for use in extrusion, injection molding, calendaring mixtures, and soft roll processes. This product is easy to process, even at high filler loadings. When used in vulcanized rubber goods, ULTRASIL® 360 leads to lower residual deformation and excellent dynamic characteristics.

ULTRASIL® VN 2 GR is primarily used at high filler loadings in PCT (passenger car tire) tread compounds without any loss in processing behavior. This silica is particularly well-suited for use in combination with bifunctional organosilanes, which help to optimize wet and winter properties. Additionally, high static moduli are observed with and without additional organosilanes. This is why ULTRASIL® VN 2 GR is also widely used in other mechanical rubber goods. It is available in both powder and granulated silica forms.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

ULTRASIL® VN 3 GR has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 GR offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 GR is widely used in different bonding systems.

ULTRASIL® 7000 is a mechanically compacted granulate that results in less dust development during mixing thanks to the granulation process. ULTRASIL® 7000 GR, on the other hand, is an easily dispersible and highly reinforcing silica that was specifically developed for low-rolling-resistance passenger car tire tread compounds. It imparts high abrasion resistance to tread compounds, along with excellent rolling resistance and wet traction. To achieve these properties, it is necessary to use ULTRASIL® 7000 in combination with a bifunctional organosilane, such as Si 69®, Si 75®, Si 266®, or Si 363.

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

Jetfine® 3CH is an ultrafine, hyper platy, white talc product that is engineered to meet the performance of Jetfine® 3CW for reinforcing the most critical TPO applications. Jetfine® 3CH yields exceptional reinforcement while maintaining optimum dispersion and low-temperature impact performance in TPO applications. It is available in compacted form for optimum handling and faster compounding rates.

Artic Mist is an off-white, high-purity, extremely platy, very fine talc serving polymer, rubber, and coatings applications. Artic Mist® is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, plastic nucleation, foamed plastics, plastic films, and wire and cable applications.

Cimpact® 699 is an off-white, high-purity, platy, ultrafine talc with excellent top-size control. It is recommended for efficient crystal nucleation, as well as very good stiffness, HDT, dimensional stability, improved impact strength, and esthetics in high-performance plastics and plastic films.

Jetfine® 3CW is a new, ultrafine, hyper platy, bright talc product for reinforcing the most critical TPO applications. It is produced in Canada by a state-of-the-art beneficiation and micronization process that yields a product with exceptional reinforcing, dispersion, and molding properties in polypropylene-based compounds. It is produced only in compacted form for good handling and faster compounding rates.

Nicron® 403 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 403 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers and topcoats to improve corrosion resistance and stain-blocking ability. Nicron® 403 is also used in paints to improve sag resistance and maximize prime pigment extension. Nicron® 403 is used in solid-color and semi-transparent wood stains to prevent tannin bleed and improve gloss uniformity without introducing abrasive characteristics.

Nicron® 402 is a high-purity, 4-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 402 is part of the Engineered Series of Imerys Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 402 is an excellent choice for modern protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 402 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.

Nicron® 353 is a high-purity microcrystalline talc. The lamellar nature of Nicron® 353 enhances film strength and flexibility and provides barrier properties in architectural and industrial primers to improve corrosion resistance and stain-blocking ability. Nicron® 353 is also used for rheology and film reinforcement in adhesive, sealant, caulk, joint compound, wood putty, and auto body patch applications.

Nicron® 302 is a high-purity, 3-Hegman microcrystalline talc product with low oil adsorption and minimal viscosity build. Nicron® 302 is part of the Engineered Series of Magris Talc products that have unique particle size distributions for improved paint performance properties. Nicron® 302 is an excellent choice for protective coating applications due to its hydrophobic nature, very low mineral solubility, and proven anti-corrosion performance. Nicron® 302 disperses easily in high-solids and solventborne coatings and gives very good paint stability, rheology, and anti-settling properties.