Products in Elastomers: Styrene Butadiene Block Copolymer

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Arlatex 1185E is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.

Emulprene 260 is a self-reinforcing emulsion rubber due to its high styrene content. The design of the elastomer allows for excellent processability during mixing and the special antioxidant used in its manufacture make it non-staining.

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

Stereon™SR8983 is a solution polymerized linear styrene-butadiene multi-block thermoplastic elastomer. This material has been designed as a graftable rubber modifier that is reacted with bromine and processed into a clean, white powder. The brominated Stereon™SR8983 is then combined with polystyrene to produce a flame retardant foam insulation used in building and home construction.

Kibiton® PB-5903 by Chi Mei Corporation is comprised of Styrene Butadiene Block Copolymer. It is commonly used

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

Emulprene 1006 is a hot emulsion styrene-butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant.

Arlatex 1490E is an aqueous dispersion of a styrene-butadiene copolymer manufactured by polymerization in emulsion. It is stabilized with a non-staining antioxidant.

Emulprene 1009LCR is a crumb hot emulsion styrene-butadiene copolymer, slightly cross-linked with divinylbenzene. It is polymerized using fatty acid as emulsifier, coagulated with salt acid and stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 7 – 12 % of Calcium carbonate is used as dusting agent.

Emulprene 1006CR is a crumb hot emulsion styrene-Butadiene copolymer, polymerized using a fatty acid emulsifier and coagulated with salt-acid. It is a very light color product stabilized with a non-staining antioxidant, and presented as free flowing dusted crumb which eliminates the end for size reduction equipment. Between 7% and 12% of Calcium Carbonate is used as dusting agent.

Kraton D1102 A is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 28.5% mass (AU) or 29.5%mass (AS, ASM) from Europe in the physical form(s) identified below in the grade nomenclature: D1102 AS - supplied as porous pellets dusted with silica D1102 AU - supplied as undusted porous pellets D1102 ASM - supplied as powder dusted with amorphous silica Kraton D1102 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Kraton D1118 K is a clear, diblock copolymer based on styrene and butadiene with a polystyrene content of 33%. It is supplied from North America in the physical form identified below. Kraton D1118 KT - supplied as a dusted porous pellet Kraton D1118 KTM - supplied as a dusted powder Kraton D1118 K is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.

Emulprene 1509 is a cold styrene – butadiene copolymer, used fatty and rosin acid as emulsifier, coagulated by salt – acid system and stabilized with a non staining antioxidant.

Emulprene 1011AL is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1778R is a cold emulsion styrene-butadiene copolymer, polymerized using fatty acid and rosin acid as emulsifier, coagulated by salt-acid system and it is extended utilizing 37.5phr of naphthenic oil and meets the European directive 2005/69/EC.

Calprene 700 is a new 70/30 butadiene/styrene Thermoplastic copolymer, polymerized in solution and having a linear structure.This product is stabilized with a non-staining antioxidant system, essentially gel free with a very clear color. Calprene 700 is a BHT* free SBS, especially suitable for food contact and textile contact applications.Calprene 700 offers good mechanical properties and shows a very good yellow index behavior.Calprene 700 is supplied in porous pellets.*(BHT content in pure polymer less than 30ppm).

Emulprene 1502CR is a Styrene-Butadiene copolymer, cold polymerized using fatty acid as emulsifer, coagulated with salt-acid and stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4 and 12 % of calcium carbonate is used as dusting agent.

Emulprene 1783 is a copolymer styrene – butadiene cold emulsion polymerized used fatty and rosin acid as emulsifier, coagulated by salt-acid system and it is extended utilizing 37.5 phr of RAE (Residual Aromatic Extract).

Emulprene 1011CR is a crumb of hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant. This rubber is produced as free flowing dusted crumb which eliminates the need for size reduction equipment. Between 4% and 12% of Calcium Carbonate is used as dusting agent.

Developed with our unique polymerization technology, Cleapact is a type of styrene copolymer resin that excels in the balance of transparency, shock-resistance and molding capacity. Products in this category have a variety of positive characteristics and meet diverse range of user needs.

Emulprene 1013ACR is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. This rubber is produced in free flowing crumb form which eliminates the need for milling, cutting, or grinding equipment. Between 7-12% of Calcium Carbonate is used as dusting agent.

Emulprene 1011 is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1500 is a cold styrene – butadienecopolymer, usingrosin acid as emulsifier, coagulated by salt-acid system and stabilized with a non-staining antioxidant.

Emulprene 1502A is a styrene-butadiene copolymer, cold polymerized using fatty and rosin acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process. The product does not contain nitrosamine promoters.

Kraton D1192 E is a clear linear block copolymer based on styrene and butadiene with bound styrene of 30% mass. It is supplied from Europe in the physical forms described below: Kraton D1192 ET- supplied as porous pellets dusted with talc Kraton D1192 ES - supplied as porous pellets dusted with amorphous silica Kraton D1192 ESM - supplied as powder dusted with amorphous silica Kraton D1192 ETM - supplied as powder dusted with talc for the North American market Kraton D1192 ETF - supplied as fluffy crumbs dusted with talc Kraton D1192 E is used for modification of industrial and paving bitumen. It may also be suitable for use in formulating adhesives, sealants and coatings, and in the modification of polymers.

Emulprene 1012 is a high viscosity hot emulsion styrene-butadiene copolymer, polymerized using fatty acid emulsifier and coagulated with salt-acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1011AH is a hot emulsion styrene-butadiene copolymer using rosin acid as emulsifier and coagulated with salt- acid. It is very light color product stabilized with a non-staining antioxidant.

Emulprene 1712 is a copolymer styrene – butadiene cold emulsion polymerized using fatty and rosin acid as emulsifiers, coagulated by salt-acid system and it is extended utilizing 37.5 phr of aromatic oil.

Jilin Xingyun Chemical (Jilin Chemical Group) Styrene Butadiene Rubber 1500 Grade 1 is The shelf of styrene butadiene rubber is longer because of its good stability.The property of styrene butadiene rubber is similar to that of natural rubber. It will appear physical and chemical change,whlie its oxidization is slow under the effect of light,heat,oxygen and ozone.

Emulprene 10140 is a product manufactured by mixing a cold styrene –butadiene copolymer containing 5.5% bound styrene (80%) with high styrene resin latex (20%), coagulated by salt– acid system and stabilized with a non-staining antioxidant.

Insagum 1027 is a hot emulsion styrene-butadiene copolymer. It is white to light yellow and free of foreign matter. It is stabilized with BHT antioxidant. Product is manufactured in accordance with Good Manufacturing Practices (GMP) and complies with U.S. FDA regulation 21 CFR 172.615 referenced to SBR used for Chewing Gum, 21 CFR 177.2600 Indirect food additives: Polymers.It meets the requirements in the Food Chemical Codex for 25/75 type SBR.

Emulprene 1013A is a styrene-butadiene copolymer, hot polymerized using a fatty acid soap. Previously to the alum-acid coagulation, a non-staining stabilizer is added in the manufacturing process.

Arlatex 1372R is an aqueous dispersion of a carboxylated styrene-butadiene copolymer manufactured by polymerization in emulsion. The type of emulsifier is anionic and it is stabilized with a non-staining antioxidant.