Products in Fluids & Lubricants: High Temperature Performance

STEPAN® MWA-501 is a methyl ester that can be used as either a solvent or a cosolvent in metalworking, die casting, and metal forming processes. It provides excellent film-forming properties and lubricity in straight oil, semi-synthetic, and full synthetic metalworking fluids. It is a non-staining product and has shown excellent results in metal-forming fluids as well as metal removal operations.

STEPAN® MWA-550 is a trimethylolpropane tricaprylate caprate polyol ester that can be used for metalworking formulations in 100% synthetic lubricants for improved lubrication properties, cutting fluids, and drawing compounds. It can enhance the performance of straight oil, semi-synthetic, and full synthetic metalworking fluids. It can also offer extreme pressure-type performance without reacting at the work-tool interface. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-553 is a fatty acid ester utilized in metalworking formulations for synthetic and semi-synthetic lubricants in high-temperature settings. It can function as a standalone chlorinated paraffin replacement or be combined with phosphate esters for enhanced lubrication properties. Its benefits include improved lubrication, a reduced average scar compared to industry standards, and higher failure loads.

STEPAN® MWA-551 is a pentaerythritol tetra c8-10 that can be used for metalworking formulations in synthetic and semi-synthetic lubricants in high-temperature applications and for improved lubrication properties. It can act as a stand-alone chlorinated paraffin replacement or be combined with phosphate esters to offer further enhancement. It shows improved lubrication by showing a reduced average scar when compared to the current industry standard.

STEPAN® MWA-500 can be used as either solvents or cosolvents in metalworking, die casting, and metal forming processes. It can be used in straight oils, semi-synthetics, and full synthetic formulations to provide lubricity and film-forming properties. Additionally, it can be used in oil- or solvent-based concrete form release products for low staining and excellent release characteristics.

ZELEC® 874 is an ester that finds utility in a diverse range of metalworking and textile applications. Notably, the product is biodegradable. Furthermore, zelec 874 can be regarded as practically non-toxic when ingested (ld50 > 5g/kg) and shows minimal irritation potential to the skin and eyes. It belongs to the chemical group of pentaerythritol ester specialty. Its primary function revolves around being a textile lubricating agent.

Dragonox® 702 is one of the important hindered-phenol antioxidants. Its main use is in plastics and synthetic rubber. Due to its excellent anti-oxidative effects at high temperatures, it can be widely used in oils operated at high temperatures, such as heat-conducting oil, quenching oil, special lubricating grease, etc.

TRIEST TMCC-0211, is a thermally stable and highly lubricating ester formed by the reaction of trimethylol propane and caprylic capric acid, a biobased fatty acid, which provides superior performance properties at both high and low temperatures. It has applications in many areas like metal working fluids, motor oils, chain and compressor oils.

TRIEST TMCC-4011, is a viscous ester formed by the reaction of trimethylol propane and biobased caprylic capric acid, which provides superior performance properties at both high and low temperatures and has high thermal stability and lubricity. It has applications in many fields like chain and compressor oils, motor oils and also in metal working fluids

LUBRICIT 3013 is a high performance aromatic synthetic ester with outstanding high temperature stability and low volatility. The aromatic group provides a strong framework that resists oxidation and hydrolysis. The resulting ester is a high viscosity base oil useful in gear and oven chain oils that reduces varnish buildup and extends fluid life.

LUBRICIT PE 418 is an oleic acid based polyol ester. It is environmentally friendly with high bioderived content and offers outstanding lubricity and low volatility. The polyol core structure provides good hydrolytic and thermal stability, making it an excellent choice for hydraulic fluids, gear oils, and metalworking applications.

LUBRICIT TMP iC9 is a polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LEXOLUBE FG HX1 fluids are high performance synthetic polyol ester base stocks for use in lubricating food processing equipment. They have achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. Food plants that use exclusively H1 lubricants do not need to report under the HACCP hazard requirement.

LEXOLUBE Z-6000 is a high viscosity polymer ester suitable for use as an additive to boost viscosity, viscosity index and lubricity. Long chain length adds tack and body to lubricant formulations. Because of its inherent polarity, it is generally incompatible with mineral oil and PAO base oils.

LEXOLUBE POE-22 is a polyol ester, designed to provide excellent oxidative stability and wide operating temperature range. It is optimum for applications requiring high temperature stability and low deposit formation, including aviation turbine engine bearing lubricants.

LEXOLUBE FG HX1 fluids are high performance synthetic polyol ester base stocks for use in lubricating food processing equipment. They have achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. Food plants that use exclusively H1 lubricants do not need to report under the HACCP hazard requirement.

LEXOLUBE PQ-68 is a pentaerythritol ester that provides lubricity, detergency, low temperature fluidity and additive compatibility in a wide range of applications. It is optimal in terms of oxidation, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, greases and gear oils.

LEXOLUBE 4PM-114 is a high performance aromatic synthetic ester with outstanding high temperature stability and low volatility. The aromatic group provides a strong framework that resists oxidation and hydrolysis. The resulting ester is a high viscosity base oil useful in gear and oven chain oils that reduces varnish buildup and extends fluid life.

LEXOLUBE CLG-460 is a complex polyol ester that provides robust solutions for high temperature applications. It is carefully manufactured to provide little or no residual carboxylic acid. This leads to better emulsion stability, and bio-resistance when properly formulated. LEXOLUBE CG-3000 has achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. With greater than 70% renewable content and high biodegradability, the product in on the LuSC list, making it a great choice for any EAL formula, such as those required by the Vessel General Permit (VGP) or EcoLabel.

LEXOLUBE Z-100 is a high viscosity polymer ester suitable for use as an additive or co-base stock to boost viscosity, viscosity index and lubricity. Long chain length adds tack and body to lubricant formulations. Because of its inherent polarity, it is generally incompatible with mineral oil and PAO base oils.

LEXOLUBE FG-12 HX1 is a diester fluid listed by NSF International as a base stock approved for incidental food contact under FDA 21 CFR 178.3570. It has low viscosity, good oxidative stability and exceptional low temperature flow properties, making it an excellent choice for extreme cold applications (freezer tunnels, ice cream manufacturing and frozen food processing).

LEXOLUBE 4VQ-415 is a polyol ester based on pentaerythritol/dipentaerythritol chemistry that provides enhanced oxidative stability with low volatility. This product provides lubricity, detergency, and additive compatibility in a wide range of applications such as compressor oils, hydraulic fluids, gear oils, as well as 2 and 4 stroke oils.

LUBRICIT TMP C810 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required. The product has achieved the HX-1 designation by NSF International, qualifying it as a lubricant basestock for incidental food contact.

LUBRICIT PE C7 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LUBRICIT TMP THCFA is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability and high bioderived content are required.

LEXOLUBE CPE-1000 is a high viscosity complex polyol ester that provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE 4T-415 is a pentaerythritol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. It is optimal in terms of oxidation and hydrolytic stability, and is useful as a base oil and an additive for most applications requiring high temperature stability such as 2 and 4 stroke oils, compressor oils, hydraulic fluids, and gear oils.

LUBRICIT 3013/1 is a high performance aromatic synthetic ester with outstanding high temperature stability and low volatility. The aromatic group provides a strong framework that resists oxidation and hydrolysis. The resulting ester is a high viscosity base oil useful in compressor, gear and oven chain oils that reduces varnish buildup and extends fluid life.

LEXOLUBE FG HX1 fluids are high performance synthetic polyol ester base stocks for use in lubricating food processing equipment. They have achieved the NSF international HX-1 ranking for incidental food contact under the requirements of FDA 21 CFR 178.3570. Food plants that use exclusively H1 lubricants do not need to report under the HACCP hazard requirement.

LUBRICIT 3090/1 is an aromatic synthetic ester that gives outstanding high temperature stability. The aromatic group provides a strong framework that resists oxidation and hydrolysis. The resulting ester is a medium viscosity base oil that reduces varnish buildup and extends fluid life.

LEXOLUBE POE-68HT is a polyol ester based on dipentaerythritol chemistry, providing excellent oxidative stability and wide operating temperature range. It is optimum for applications requiring high temperature stability and low deposit formation.

LUBRICIT PE iC18 is a polyol ester that provides lubricity, detergency, and additive compatibility in a wide range of applications. This product is useful in applications where good oxidative stability, low temperature fluidity, and high bioderived content are required.

LUBRICIT PE 510/1 is a low viscosity polyol ester that is used as a synthetic base oil for formulations requiring wide temperature operating range, low volatility and good oxidative stability.

LEXOLUBE CPE-70 is a complex polyol ester that provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE CPE-220 is a complex polyol ester that provides cost-effective solutions for a wide range of applications such as textile (tenter frame), fiberglass production, and wood laminating. It is useful as a synthetic base stock for most applications requiring high temperature stability. It features oxidation resistance, lubricity, and thermal stability for low deposit formation.

LEXOLUBE POE-32 is a proprietary polyol ester composition, designed to provide excellent oxidative stability and wide operating temperature range. It is optimum for applications requiring high temperature stability and low deposit formation, including aviation turbine engine bearing lubricants.