Products in Fluids & Lubricants: Improved Anti-Wear

STEPAN® MWA-390 is an alcohol phosphate, functioning as a low-foaming emulsifier. Its application extends to synthetic and semi-synthetic lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It falls within the category of surfactants and has a presence in the industrial products market.

ZELEC® A130 can be used as a wetting agent in the paint and coating industries. In this application, it could also contribute to the improvement of corrosion resistance, gloss, color acceptance, wet scrub resistance, and the hiding power of the film. It can also be used as an antistatic agent in textile and leather finishing and processing and in rubber, plastic, and composite processing. It can also act as an emulsifier and corrosion inhibitor in metalworking fluid, printing pressrooms, and oil fields. It can also be used as a demolding agent in a construction area and in rubber, plastic, or composite processing. It also has lubrication properties for metalworking fluids and textile and leather finishing and processing, including extreme-pressure and anti-wear properties.

STEPAN® MWA-395 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values.

STEPAN® MWA-310 is a phosphate ester and can be used as an emulsifier and extreme pressure agent in synthetic and semi-synthetic metalworking fluids. It can be used as a component of lubricants, gear and chain oils, metalworking fluids, hydraulic fluids, and plasticizers. It is soluble in water and slightly soluble in oil, yielding very low surface tension and cmc values. It can improve corrosion inhibition and also provide protection for aluminum.

Armolube® EM 404 emulsifier (4 EO) offers moderate to good friction and wear reduction benefits and acts as a good all-round non-ionic emulsifier.

Armolube® AW 101 anti-wear agent provides good ashless anti-wear performance, acting as a good corrosion inhibitor for iron (Fe) and aluminum (Al). It is a reasonably good emulsifier with improved solubility benefits in emulsion for less-sticky soaps.

Armolube® AW 102 anti-wear agent offers excellent ashless anti-wear performance and all-around corrosion inhibition for iron (Fe) and aluminum (Al) and is a reasonably good anion emulsifier with low foaming characteristics.

Armolube® FM 501BL friction modifier acts as an excellent ashless friction modifier across all friction regimes – useful for either lubricant or fuel formulations with very good wear reduction/lubricity benefits and as a good oil-soluble co-emulsifier.

PolyGlide® 1226XF is a highly engineered HDPE/ceramic/nanoceramic composite for abrasion resistance and lubricity.Features and Benefits HDPE composite reinforced with hard, inert ceramic microspheres and nanoceramic platelets Improved Taber abrasion resistance when compared to PE/PTFE additives Provides slip and lubricity Ideal for can and container coatings; 21CFR 175.300 approved Effective replacement for PTFE additives Compare to (coarser) Polyfluo 900

NatureFine R331 is Finely micronized food grade rice bran wax for use in industrial coatings and agrochemical products.Features and Benefits Natural food grade wax conforming to 21CFR 172.890 Excellent burnish and abrasion resistance compared to synthetic wax additives Biodegradable to OECD 302C test standard Improves lubricity, dust-off, and block resistance in seed coatings Effective dry powder binding agent Microplastic alternative

Polyfluo® 523XF is a unique extra fine, high performance composite of polyethylene and PTFE for superior surface lubricity with scratch and abrasion resistance.Features and Benefits High performance product for adding slip, scratch and abrasion resistance Synergistic wax combination that enhances PTFE mobility to the coating surface PTFE dramatically enhances abrasion resistance High density polyethylene provides improved surface slip Extra fine particle size provides excellent gloss retention and film clarity

HeBoFill® LL-SP 120 is a Boron Nitride powder of high purity. Its high crystallinity results in excellent lubrication. The powder is also characterised by a narrow grain size distribution. The high crystallinity results in a relatively low specific surface area. This property enables a low increase in viscosity at high filler loadings.

LUBIMAX® AW 1148 is a C4 and C8 Primary Zinc Dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 1148 additive is also recommended for use in industrial fluids and greases.

LUBIMAX® D 9989 is a premium engine oil additive package for formulating high-tier crankcase oils that is specially designed to provide excellent control of deposits, component wear and extended drain intervals. LUBIMAX® D 9989 meets the specifications of API performance level CI-4/SL, CH-4/SJ, CG-4 and CF-4.

NA-LUBE® BL-1400 is a fully-formulated ashless additive package for antiwear hydraulic fluids. It can be used to formulate fluids that meet Parker Hannifin (Denison) HF-0, HF-1 and HF-2 requirements.

K-CORR® G-1340 is a proprietary zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate.

NanoFLON® PAO-30 is a stable, 30% dispersion of premium grade submicron polytetrafluoroethylene (PTFE) in poly-alpha-olefin (PAO). These products are ideal for use in extreme pressure, anti-wear and low friction lubricants under high or low temperatures.

Biocea™ II deliver superior lubricity, film strength, biostability, hydrolytic stability, oxidation stability, and increased polarity on both ferrous and non-ferrous alloys. They are derived from natural oils and improve the overall quality of formulated metalworking fluid while being sustainable and environmentally friendly. Biocea additives are known to increase productivity, reduced waste and down time, and lower cost in your overall manufacturing operation.

NanoFLON® MO20 is a 20% dispersion of premium grade submicron polytetrafluoroethylene (PTFE) in mineral oil. These products are ideal for use in extreme pressure, anti-wear and low friction lubricants under high or low temperatures.

Biocea™ III deliver superior lubricity, film strength, biostability, hydrolytic stability, oxidation stability, and increased polarity on both ferrous and non-ferrous alloys. They are derived from natural oils and improve the overall quality of formulated metalworking fluid while being sustainable and environmentally friendly. Biocea additives are known to increase productivity, reduced waste and down time, and lower cost in your overall manufacturing operation.

HeBoLub® O30 is a highly concentrated, stable oil dispersion of ultrafine hexagonal Boron Nitride particles in a high quality base oil. When added to lubricants, HeBoLub® O30 helps to reduce friction and wear.

NA-LUBE® EP-5665 is an ashless, multifunctional additive with excellent extreme pressure / antiwear and antioxidant properties. It is recommended for use in greases where heavy load carrying capability is required.

K-CORR® G-1360 is a proprietary zinc based rust inhibitor system developed for specialty grease applications as a replacement for zinc naphthenate.

K-CORR® G-1107 is a proprietary ashless rust inhibitor/antiwear additive system developed for industrial and automotive greases.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

NA-LUBE® AW-6400FG is an ashless rust and corrosion inhibitor and antiwear additive.

K-CORR® G-1370 is a proprietary rust inhibitor system developed for industrial and automotive greases.

Polysilk® 600 is a formulated wax composite that provides surface slip with scratch and rub resistance, as well as a smooth surface feel.Features and Benefits Provides a high level of scratch and rub resistance Improves tape release, block resistance, and heat resistance Adds surface slip to impart a silky smooth feel Maximum lubricity achieved after 12 to 24 hours Easy to disperse fine powder that can be incorporated with high speed mixing

LUBIMAX® AW 2266 is a C6 secondary zinc dialkyldithiophosphate (ZDDP) anti-wear additive to formulate diesel and gasoline crankcase lubricant oils with suitable base stocks. It has an excellent protection against corrosion, oxidation and wear in internal combustion engine components. LUBIMAX® AW 2266 additive is also recommended for use in industrial fluids and greases.

NA-LUBE® AW-6330 is an multifunctional ashless additive for industrial and automotive lubricants, greases, and metalworking fluids. NA-LUBE® AW-6330 exhibits excellent extreme pressure and antiwear properties. Additionally, it imparts antioxidation properties to lubricants and greases.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ E is optimized for Power generation units.The unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ ML is optimized for Marine engines operating with low sulfur fuel oils. With only 3 % of Nanol® POWER+ ML in lubricant our customers have witness 2-6% fuel savings.Nanol Power+ ML:Reduces frictionReduces wearCuts down emissionsSaves fuelProlongs lifetime of componentsImproves machinery efficiencyThe unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear

Fluoro GT 105 is a 5 micron polytetrafluoroethylene (PTFE) micropowder. Fluoro GT designates a series of PTFE micro powders made from highly crystalline, sintered PTFE. These products can be added with minimal to no change to the viscosity of the system. They impart excellent lubricity and wear resistance.

NA-LUBE® BL-1208 is a multifunctional premium ashless R&O additive package for industrial oils that exhibits outstanding antioxidant performance in ASTM D 2272, RPVOT.

NA-LUBE® ADTC is a unique ashless dithiocarbamate offering extreme pressure, antiwear and antioxidant properties.

NA-LUBE® BL-1232 EL is an environmentally friendly multifunctional premium ashless additive package designed for use in ester-based systems.