Products in Fluids & Lubricants: Water-based

SILFOAM® SE 39 is a low-viscosity antifoam emulsion known for its long-lasting efficiency. It is especially well-suited for surfactant-rich formulations like liquid detergents and textile auxiliaries. SILFOAM® SE 39 is particularly effective in applications where high surfactant concentrations or intense product movement would quickly render conventional antifoam emulsions ineffective.

SILFOAM® SE 47 is a versatile antifoam emulsion with a relatively high emulsifier content. It has shown great effectiveness in addressing foam-related challenges in various applications, including textile auxiliaries and processes like dyeing. Additionally, it is suitable for use in surfactant formulations, cooling lubricants based on mineral oils, and for separating monomers from dispersions and converting dispersions into derivatives.

parmetol® K 20 is a bivalent stabilized aqueous preparation based on chloromethyl-/methylisothiazolone (CMI/MI), stabilized with copper and magnesium salts. It is suitable for preserving a broad range of water-based products, offering a broad spectrum of efficacy. parmetol® K 20 is free of VOCs and organic solvents. It is used for disinfecting surfaces, materials, equipment, and furniture, and for preserving products during storage. It is also used in liquid-cooling and processing systems, slimicides, and working or cutting fluid preservatives.

parmetol® K 6 is an aqueous combination of chloromethyl/methylisothiazolone (CMI/MI) stabilized with copper and magnesium salts. It effectively preserves water-based products of various kinds, offering a broad spectrum of protection. Free from volatile organic compounds (VOC) and organic solvents, it ensures reliable and high-performance preservation without compromising environmental standards. It's suitable for preserving manufactured products and controlling microbial deterioration to extend their shelf life.

parmetol® K 11 is a copper stabilized combination of isothiazolones, water based combination of chloromethyl-/ methylisothiazolone (CMI/ MI).

grotanol® 3025 is a microbiocidal system cleaner based on glutaral and chloromethyl-/methylisothiazolone (3:1). It effectively combats bacteria, yeasts, and molds across anionic, cationic, and non-ionic systems, with low foaming and immediate action. Free of formaldehyde and solvents, it can be rinsed off without leaving residue and meets strict regulatory standards. Ideal for industrial settings like food-processing, pharmaceutical, and cosmetic industries, surfaces in contact with food must be rinsed with water after the recommended contact time.

ASCOTRAN® L is a corrosion inhibitor preventing corrosion in various applications. It is fully hydrosoluble, working in fluids such as lubricants, degreasers, cutting oils, and grinding fluids. These fluids protect metals from corrosion in water-based emulsions or solutions. ASCOTRAN® L is the most universal anticorrosion additive, addressing most corrosion problems in metal cleaning and stripping applications. It is specifically designed for hydrostatic tests, providing total protection of metallic elements during and after the test procedure. ASCOTRAN® L is ideal for temporary protection, replacing greases and varnishes, and offers protection for ferrous and non-ferrous metals in aqueous media.

ASCOTRAN® RCX is an Organic Acid Technology corrosion inhibitor for heat-transfer fluids, antifreezes and glycol or alcohol-type coolants, used in construction, industry or automotive.

OMACIDE™ IPBC 40 Industrial Fungicide is a pungent aromatic, pale yellow to amber-colored liquid broad spectrum fungicide additive. It is used in architectural coatings, textiles, construction applications such as paints, stains, adhesives, caulks, and sealants, as well as plastic product applications to prevent dry film fungal growth. OMACIDE™ IPBC 40 Industrial Fungicide is also a very effective additive for controlling fungal growth in aqueous-based fluids such as inks and metalworking fluids.

Naxonac® 184 is an anionic surfactant designed to meet multiple needs in metalworking fluids. It serves as an emulsifier, wetting agent, anti-wear additive, corrosion inhibitor, and lubricant. Its stability and solubility in alkali systems are some of the main advantages of phosphate esters. It can also be used as a hydrotrope to couple nonionic surfactant systems that are not soluble, while at the same time increasing wetting and detergency properties. With these features, Naxonac® 184 is an excellent choice for metalworking applications.

Naxonac® 8610 is an alkyl phenol ether phosphate designed to provide emulsification, solubility, coupling, and detergency in water-soluble applications. As an anionic surfactant, one of the main advantages of the phosphate ester is its stability and solubility in alkali systems. It can be used as hydrotropes to couple nonionic surfactant systems that are not soluble and at the same time increase wetting and detergency properties.

Naxonac® 690-50 is an alkyl phenol ether phosphate designed to meet your needs as an emulsifier, imparting corrosion resistance in the emulsion polymerization of vinyl acetate and highly carboxylated acrylics and enhancing detergency in alkaline systems. It does not discolor when used to de-dust alkaline powders.

ASCOTRAN® RCX is a water-based, ultra high-performance corrosion inhibitor concentrate designed for preparing high-quality engine coolant/antifreeze concentrates by adding monoethylene glycol (MEG) or propylene glycol (MPG).

DeCORE AFCI - 45 is an anionic, amine-free, water-soluble multi-metal corrosion inhibitor. It's recommended for safeguarding a range of metals, such as aluminum, copper, brass, bronze, steel, and cast iron, as well as ferrous and non-ferrous metals in aqueous systems. Additionally, DeCORE AFCI - 45 serves as a highly efficient hydrotrope for alkaline systems.

DeCORE IMT - 100LF is a low-foaming, anionic, mixed amine carboxylate. It is recommended as a corrosion inhibitor for both ferrous and non-ferrous metals, offering effective protection while minimizing foam formation.

TRIEST EHPH-2111, is a water-soluble, anti-corrosion ester formed by the reaction of ethylhexyl alcohol with mono- and di-phosphoric acid, used as a viscosity control agent, especially in polymers and coatings. It's applications lies in many fields like polymer industry, coatings, textile auxiliary chemicals, cleaning products.

ILCO PHOS 215 is Multifunctional additive for water-based lubricants providing emulsification, anti-wear, extreme pressure, and corrosion inhibition. Preferred antiwear/emulsifier for water-based metal working lubricants. ILCO PHOS 215 is also used in cosmetic formulations. It acts as O/W emulsifier to promote the formation of intimate mixtures of non-miscible liquids by altering the interfacial tension.

flashproTAC C4E is a ready to use flashrust inhibitor for iron & steel. It is mainly designed for all kinds of paint & coating applications.

Alpha Olefin Sulfonate Synsul™ AOS is an aqueous solution of sodium olefin sulfonates with a molecular weight of approximately 325. This non-ionic surfactant is highly effective as the foaming agent in many different personal care applications as well as fracturing fluids for subterranean formations. It also has utility as a foaming agent in enhanced oil recovery and is an efficient component for the clean-up of gas producing wells. Synsul™ AOS exhibits excellent heat stability and is compatible with a wide variety of other additives. It is especially suited for use in freshwater systems and is readily biodegradable.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

flashproTAC F2M is a flashrust inhibitor for iron & steel, mainly for paint & coating applications. Because of its unique formulation (contrary to nearly all other FRI´s) it has a very good tox profile and no labeling.

TACorr G50 is a novel, polymeric corrosion inhibitor, offering multi metal protection, e. g. On alumina alloys, iron & steel, non ferrous metals, zinc and others. It was developed through a combined R&D project with Fraunhofer IFAM, Bremen.

ASTRO-KOTE C is a synthetic water-based rust inhibitor for in-plant rust protection on steel alloys. It was designed to prevent rust on mild steel parts between machining operations. It can also be used in the final rinse after the soak, spray, or barrel tumbling operations. This product does not leave any oily films and may be used as a supplementary rust inhibitor for use in water-soluble metalworking fluids.

TACorr MSW is a long term multimetal protection designed especially for problems with sandblasted aluminum in paint & coatings. TACorr MSW is a TACorr G50 polymer modification with benefits in adhesion for example at the scratch after salt spray test on various metals.

TACorr BNi is a ready to use corrosion inhibitor for multimetal, iron & steel. It is mainly designed for all kinds of paint and coating applications.

ASTRO-KOTE C-XBP is a synthetic water-based rust inhibitor for in-plant rust protection on steel alloys. It was designed to prevent rust on mild steel parts between machining operations and can also be used in the final rinse after the soak, spray, or barrel tumbling operations. This product does not leave any oily films and may be used as a supplementary rust inhibitor for use in water-soluble metalworking fluids.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.

ASTRO-KOTE PM is a synthetic, water-based rust inhibitor for in-plant rust protection on ferrous alloys and was designed to prevent rust on pressed metal parts between processing operations. It can also be used in the final rinse after the soak, spray, or barrel tumbling operations. This product does not leave any oily films and contains no solvents. ASTRO-KOTE PM may be used as a supplementary rust inhibitor for use in water-soluble metalworking fluids such as aqueous cleaners. It contains wetting agents which facilitate penetration into pressed metal parts either before or after sintering. It is ashless and will not leave residues when parts are heat treated or sintered.

K-Syn™ CI-200 is an economical and highly effective corrosion inhibitor formulated to provide protection to cast iron and steel alloys. K-Syn™ CI-200 is designed for use in synthetic and low oil semi-synthetic metalworking fluids, water-based hydraulic fluids, and industrial cleaners. This amine carboxylate is inherently low foaming and has exceptional hard water stability. K-Syn™ CI-200 will deposit a thin oily-type film, upon the evaporation of water, which will also provide some short-term storage protection. K-Syn™ CI-200 contains no nitrates/nitrites, boron or secondary amines.

K-Amide™ X-1011 is a versatile, low-foaming rust and corrosion inhibitor for use in metalworking fluids, alkaline cleaners, and water-based quenching fluids. K-Amide™ X-1011 exhibits good compatibility with sulfonates, PIBSAs and other products as part of metalworking formulary. The non-tacky films of K-Amide™ X-1011 are easily removed with alkaline cleaners. K-Amide™ X-1011 is non-staining to yellow metals and can be used as a component of soluble oils as well as synthetic and semi-synthetic fluids. K-Amide™ X-1011 offers excellent cast iron chip test results at low concentrations.

TACorr G50-50 is a ready to use water soluble version of the pure polymer TACorr G50

K-Syn™ CI-100 is a high performance, water soluble corrosion inhibitor formulated to provide protection to cast iron and steel alloys. K-Syn™ CI-100 is designed for use in synthetic and low oil semi-synthetic metalworking fluids, water-based hydraulic fluids, and industrial cleaners. This amine carboxylate is inherently low foaming and has exceptional hard water stability. K-Syn™ CI-100 will deposit a thin oily-type film, upon the evaporation of water, which will also provide some short-term storage protection. K-Syn™ CI-100 contains no nitrates/nitrites, boron or secondary amines.

ICT Oilfield Products CSH Plus is a proprietary blend of additives selected to provide lost circulation control. It is composed of several cellulosic materials, including cotton seed hulls. It provides a wider particle size distribution, from fine to very coarse, enhancing the control of lost circulation much better than do cotton seed hulls or cedar fiber alone. It can be used for a wide application of losses.

Coolsurf DILO-11 is a superamide formed by the reaction of lard oil and saturated fats derived from lard oil with Diisopropanolamine (DIPA). Coolsurf DILO-11 is free from ethanolamine.

U.S. Industrial Fluids Prevox 5005 A-RP is a water-based corrosion inhibitor that will protect ferrous metals from rust in indoor atmospheres. The film is thin and feels dry to the trust. This product works by the evaporation of water, leaving a very thin film of amine salts that form a protective coating to provide short-term, covered storage. Prevox 5005 A-RP is easily removed with a mild solution of ant detergent.

Vector HTS products are biodegradable, viscous, polymer/surfactant mixtures formulated to be used with Aluminum oxide (either PWA type or FO Type) and de-ionized water to form a suspension type lapping slurry. Designed primarily for use in lapping silicon wafers, Vector HTS products fully disperse and suspend abrasive material for extended periods of time with relatively little change in physical or chemical characteristics. Designed for use on all types of lapping plates, the products perform particularly well with serrated or grooved plates. The HTS products differ chemically and physically, resulting in differences in wetting, film strength and viscosity. Some of the variables that effect HTS Product choice include: type of lapping plates, type of pumping system, brand of machine, operating pressure, type of abrasive. The choice of Vector HTS products provides the user with precisely the correct chemistry for achieving optimum results from a lapping process. It is a lapping and polishing additive for semiconductor materials.