Products in Pigments & Colorants: Green (Fluorescent)

ELASTOSIL® Color Paste FL Heliogreen RAL 6004 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Green RAL 6010 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Green Translucent 556 C is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Pine Green RAL 6028 C is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without impairment of the physical properties (e.g. hardness) and without migration as it may be observed for systems based on silicone oil.

ELASTOSIL® Color Paste FL Mint Green Pantone 3262 C is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Light Green RAL 6027 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Grey-Green Translucent 5467 C is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL Neon Green 1107070 D is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

ELASTOSIL® Color Paste FL May Green RAL 6017 K1 is a ready-to-use masterbatch that contains specific pigments and reactive silicone polymers. It is commonly used for producing ELASTOSIL® liquid silicone rubber. This color paste enables homogeneous covulcanization without significantly affecting the physical properties, such as hardness, and without the risk of migration often seen in systems based on silicone oil.

MOCOM Compounds ALCOLOR® PA A GN3004-13 is a green, fluorescent colorant suitable for use in Polyamide with a dosage of 3% extrusion and 3% injection molding, dependent on wall thickness and required color intensity. It is free from cadmium, lead, and diarylide pigments, is dust-free, and has high dispersibility. It is suitable for applications in the electrical and electronic, furniture, building and construction, and sport and leisure markets. For injection molding, the melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

An incredibly fine particle fluorescent colorant in emulsion form for use in applications where small particles and low viscosity are desired.

A fine particle size formaldehyde-free pigment. For use in aqueous systems and non-aqueous systems.

Completely non-formaldehyde fluorescent pigment for masterbatch

A tinctorially strong fluorescent ink base for use in sheetfed, heatset and UV ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses.

A tinctorially strong fluorescent ink base for use in sheetfed and heatset lithographic ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes.

A tinctorially strong general purpose fluorescent pigment for use in low polarity systems including paper coatings, paints, screen inks, plastisols and gravure type "A" inks.

A tinctorially strong general purpose fluorescent pigment for use in low polarity systems including paper coatings, target coatings and certain aerosol paints.

Completely non-formaldehyde fluorescent pigment for masterbatch

A fine particle size pigment with high tinctorial strength, manufactured in a thermoset matrix. For use where heat and solvent resistance are essential. These pigments are generally more suitable for long term storage in water systems. Formulated for optimal fade resistance.

An incredibly fine particle fluorescent colorant in emulsion form for use in applications where small particles and low viscosity are desired.

A tinctorially strong fluorescent ink base for use in sheetfed, heatset and UV ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes. BIB2 contains no traditional ink oils, which can attack rollers on UV presses.

A tinctorially strong fluorescent ink base for use in sheetfed and heatset lithographic ink systems that prints in one pass at equivalent strength of a typical fluorescent ink base in two passes.

An incredibly inert fluorescent pigment, which is highly cross-linked and has a spherical particle shape for use in applications where the avoidance of swelling, bleeding, migration or plateout is desired.

A fine particle size pigment with high tinctorial strength, manufactured in a thermoset matrix. For use where heat and solvent resistance are essential. These pigments are generally more suitable for long term storage in water systems. Formulated for optimal fade resistance.

WAX and WT Fluorescent Water Dispersions are used in a variety of applications, including latex paints, tempera paints, water colors, paper coatings and other aqueous systems. WAX/WT Dispersions exhibit good lightfastness for interior applications.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

ARAMARK-30 emulsions are formaldehyde-free, fluorescent, waterborne acrylic-pigment-emulsions especially for use in highlighter/marker pens after dilution in demineralized water

T and GT-series pigments are thermoset, fluorescent pigments recommended for a wide range of applications where solvent resistance is required.

ARAQUA-10 series is a new Generation of formaldehyde-free, fluorescent pigments with significantly improved light fastness and color strength compared to conventional, formaldehyde-containing fluorescent pigments. This innovative range of daylight fluorescent pigments offers intense fluorescence and outstanding stability in waterborne formulations for extended shelf-life.

EZ Series is a new class of formaldehyde free, high performance fluorescent pigment. Ezentus colorants are made with user-friendly materials that eliminate chemicals of concern without compromising performance. These versatile pigments can be used where traditional fluorescent colorants cannot. Whether it's for an ink or coatings application, where solvent resistance is needed or even compounding an EVA foam or a flexible PVC application, Ezentus will perform where other fluorescent pigments fail. EZ Series offers formulators a migration free product as well as one with improved lightfastness.

The DayGlo SPL-N Dispersions contain approximately 46% fluorescent pigment dispersed in water and a small percentage of alkali soluble acrylic resin. The SPL-N Dispersions are V.O.C. (Volatile Organic Compounds) free. They are compatible with a wide range of aqueous systems.

ECO pigments are the first formaldehyde-free pigments to attain the color brilliance and stability offered by traditional formaldehyde containing products with the added benefit of being produced using recycled materials. ECO pigments are recommended for a wide range of applications where resistance to strong solvents is not required. ECO pigments can be used in paper coating, textile printing, aliphatic solvent-based gravure inks, craft and hobby paints and vinyl plastisol inks.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

ARASOL-10 fluorescent pigments are state of the art technology for waterborne or solvent-based spray can formulations