Products in Pigments & Colorants: Inorganic Pigments

HALOX® CW-314 is a heavy metal-free, non-toxic, anti-corrosive pigment designed for use in waterborne and solvent-borne protective coating systems. It is particularly suitable for systems where 21 CFR 175.300 approval or compliance with ANSI or NSF standards is required. HALOX® CW-314 is highly effective in improving the infrared (IR) reflectance and thermal emissivity of elastomeric roof coatings. It enhances the total solar reflectance (TSR) while maintaining dirt pick-up resistance (DPUR) and preventing mildew growth. It can be used alone or in combination with other non-toxic corrosion inhibitors and mineral pigments in the formulation of environmentally friendly specialty paints.

HALOX® SW-111 is a white, nonrefractive, corrosion-inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water-reducible resin systems and corrosion-resistant caulks and sealants.

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX® 430 JM is a non-toxic, heavy metal-free anti-corrosive pigment designed for use in waterborne and solventborne protective coating systems. HALOX® 430 JM is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

Ti-Pure™ R-931 is a rutile titanium dioxide pigment designed to provide maximum hiding in high-quality, high-PVC architectural coatings. This product has maximized efficiency while maintaining the highest level of film integrity. It is manufactured by the chloride process and has at least 80% TiO2 content.

Ti-Pure™ R-960 Plastics is a rutile titanium dioxide pigment manufactured by the chloride process. It is excellent for exterior plastic applications that require outstanding chalking resistance, gloss, tint, and physical property retention. Its surface treatment minimizes potential reactions with polymer resins and additives while continuing to provide the high level of UV radiation protection associated with rutile titanium dioxide.

DCL Yellow 30C236 is a golden yellow powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

Ti-Pure™ TS-1510 is a highly efficient rutile titanium dioxide pigment that is manufactured with a revolutionary processing technology. It was designed to significantly enhance the level of processing efficiency in plastics applications, including POMB. Ti-Pure™ TS-1510 provides improved flowability, line productivity, energy, and labor efficiencies, along with low-dusting that promotes safer handling and material efficiency. It is excellent for high-temperature plastic applications requiring outstanding dispersibility and the lowest possible volatility.

DCL Yellow 30C152 is a chromatic yellow inorganic pigment produced by high-temperature calcination. It has excellent UV and visible opacity, is chemically inert, heat resistant, and stable to ultraviolet light; it is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is generally used in applications where resistance to heat, light, and weather is needed, and is compatible with most resin systems and polymers, being non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

DCL Yellow 10C151 is an inorganic chromatic yellow pigment produced by high-temperature calcination. It has excellent UV and visible opacity, is chemically inert and heat-resistant, and is stable to ultraviolet light. It is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is generally used in applications where resistance to heat, light, and weather are needed, and is compatible with most resin systems and polymers while also being non-warping. Typical applications include coatings and other applications that require equivalent pigment chemistry.

DCL Yellow 30C119 is a bright yellow powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. It is compatible with most resin systems and polymers, and it is non-warping. Typical applications include liquid and powder coatings, inks, dispersions, concrete, plastics, and other applications where equivalent pigment chemistry is used.

Ti-Pure™ R-960 Coatings is a rutile titanium dioxide pigment manufactured by the chloride process. It is designed for use in applications requiring outstanding chalk resistance, gloss retention, and tint retention. In addition to excellent exterior durability, Ti-Pure™ R-960 provides very good dispersion with excellent hiding power and color acceptance.

DCL Brown 30C888 is a reddish-brown powder produced by high-temperature calcination. This pigment has excellent UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has exceptional durability and hiding power, and is generally used in applications where resistance to heat, light, and weather are needed. It is compatible with most resin systems and polymers, and is non-warping; typical applications include (but are not limited to) coatings and other applications where equivalent pigment chemistry is used.

DCL 1820M Syn Micronized Yel Iron Oxide, PY.42 is a synthetic micronized yellow pigment that has superior dispersibility and improved hiding. 1820M is darker and more red in shade compared to 1810M and it is FDA-approved under section 178.3297.

DCL Green 410 is a dark green powder produced by high-temperature calcination. It has high near-infrared reflectance, excellent UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is compatible with most resin systems and polymers, and is non-warping, making it ideal for applications where resistance to heat, light, and weather is needed.

DCL Green 10K637 is a green-blue powder produced by high-temperature calcination. It has low residual solubles, good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding and non-migratory, has exceptional durability and hiding power, and is generally used in applications requiring resistance to heat, light, and weather. It is compatible with most resin systems and polymers, and it is non-warping.

DCL 301 Chromium Oxide Green, PG.17 (light shade, G4099 type) is a high-quality, clean, yellow-shade, very-stable green pigment that is unaffected by acids, alkalis, and solvents. It is heat-stable, offers excellent value, lightfastness, and weatherability, and is FDA-approved (Section 178.3297).

DCL RMX Bismuth Vanadate, PY.184 is a bright lemon-shade yellow pigment with high color strength and excellent opacity. It exhibits very good weather fastness and is used primarily in industrial and decorative paint applications, allowing for much cleaner shades and/or lower formulation costs.

DCL 7081 65% Leafing Aluminum Paste (CB-180S-65) is a medium-fine metal paste, that offers a good combination of reflectivity and hiding. 7054 is ideally suited for trade-use, maintenance, and industrial coatings, it also meets the ASTM D962-II, B standards.

DCL Blue 10G580 is a dark blue powder produced by high-temperature calcination with good UV and visible opacity, chemical inertness, heat resistance, and stability to ultraviolet light. It has exceptional durability and hiding power and is non-bleeding, non-migratory, and non-warping. It is compatible with most resin systems and polymers and is often used in applications where resistance to heat, light, and weather is needed, such as liquid and powder coatings, inks, dispersions, concrete, and plastics.

DCL Violet 11C is a red-violet powder produced by a high-temperature precipitation process, giving it a non-migrating and non-bleeding pigment. It has fair heat stability but poor exterior durability. Typical applications (non inclusive) are cosmetics (especially those intended for use around the eye), externally used drugs, and other applications where equivalent pigment chemistry is used.

DCL Green 260 is a medium green powder produced by high-temperature calcination. This pigment has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is generally used in applications requiring resistance to heat, light, and weather, and is compatible with most resin systems and polymers, as well as being non-warping.

DCL RC-800-PG Rutile Titanium, PW.6 (Chloride) is a low oil absorption, chloride-process rutile titanium dioxide pigment, surface-treated with alumina and silica. It offers excellent tint strength and dispersibility, providing a bluish/white high dispersion product, and is approved for use under 21 CFR 178.3297 by the FDA.

DCL 2GTAA Bismuth Vanadate, PY.184 is a green-shade yellow pigment with excellent alkaline stability, weather fastness, heat stability, high saturation, and high opacity. It is especially optimized for extreme alkaline stability and is thus recommended for use on high-alkaline substrates and alkaline-containing systems, such as silicate plasters and stuccos. Its high color strength, high gloss, clean shade, and easy dispersion offer significant advantages for formulation flexibility and make it a great value to use.

DCL 7075 65% Leafing Aluminum Paste (CB-180-65) is a coarse paste widely used in asphalt-based roof coatings with an extremely high leafing value and brightness. 7075 is mainly recommended to be used in industrial coatings, it also meets the ASTM D962-II, C standards.

DCL KY881 Lemon Yellow, PY.34 is a silica-encapsulated lemon chrome-yellow pigment with superior heat and chemical resistance for high-end industrial coating and plastic applications. It also exhibits good overall lightfastness, weather fastness, and heat stability. This makes it a reliable and versatile choice for a wide range of applications.

DCL KO886 Molybdate Orange, PR.104 is a blue-shaded silica-encapsulated moly orange pigment with superior heat and chemical resistance for high-end industrial coating applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL 8330M Syn Micronized Black Iron Oxide, PBk.11 is the stronger, slightly bluer shade by DCL, composed of micronized black iron oxide, and is FDA-approved (Section 178.3297). It is suitable for use in various plastic applications, including PVC, PE and PP, as well as decorative, industrial, and powder coatings.

DCL 8045 Buff Rutile Titanium Dioxide, PW.6 is a buff-colored (tan) rutile grade that offers comparable performance characteristics, such as opacity, to white TiO2. It can reduce the amount of some organic and other inorganic pigments, as well as some white TiO2 in selected formulations.

DCL 5033 Lemon Yellow, PY.34 is a pre-darkened, SO2-resistant, high-performance lemon shade yellow pigment with stir-in properties and is recommended for coating and plastic applications. This product is restricted to industrial and professional inks, coatings, plastics, and roadmarking (subject to regional legislation).

DCL Y933 Lemon Yellow, PY.34 is a standard lemon chrome yellow pigment, mainly used in plastics and coatings. It exhibits good overall resistance properties, lightfastness, weather fastness, and heat stability. The applications of this product are restricted to industrial and professional inks, coatings, plastics and roadmarking applications (subject to regional legislation).

DCL Black 1G is a jet-black powder produced through high-temperature calcination, featuring good UV and visible opacity, chemical inertness, and resistance to heat, light, and weather. It has exceptional durability and hiding power, and is non-bleeding, non-migratory, and non-warping. It is compatible with most resin systems and polymers and is typically used in liquid and powder coatings, inks, dispersions, and plastics.

DCL 7053-CB 65% Non-Leafing Aluminum Paste (CB-180S-NL) is a non-leafing aluminum paste with a metal 1 color index. This product can also be used for trade-uses, industrial and maintenance coatings. It also meets the ASTM D962-IV, B standards.

DCL Green 10G655 is a medium green powder produced by high-temperature calcination. It has good UV and visible opacity, is chemically inert, heat-resistant, and stable to ultraviolet light. It is non-bleeding, non-migratory, and has exceptional durability and hiding power. It is generally used in applications where resistance to heat, light, and weather are needed, is compatible with most resin systems and polymers, and is non-warping.

DCL 243-XF Zinc Chromate ED, PY.36 is an extra-fine, easy-dispersing, chromate-based product with excellent outdoor ability. 243-XF is recommended for all types of primers, including alkyds and epoxy anticorrosive coatings, mainly used in automotive, aerospace, industrial, and powder coating applications.

DCL 2603R Medium Yellow, PY.34 is a silica-encapsulated medium chrome yellow pigment used for thermoplastic road marking applications. It has excellent resistance properties, good lightfastness, weather fastness, and heat stability, which make it suitable for a range of industrial and professional inks, coatings, and plastics.