Products in Plastics: Coating

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.

VESTAKEEP® 5000 P is a high-viscosity polyether ether ketone powder known for its outstanding thermal and chemical resistance. This unreinforced, semi-crystalline polymer offers superior performance in challenging environments. VESTAKEEP® 5000 P exhibits low flammability, ensuring enhanced safety. It is supplied as a powder conveniently packaged in boxes with moisture-proof polyethylene liners. Experience the reliability and versatility of VESTAKEEP® 5000 P for your specific applications. This high-viscosity powder delivers exceptional thermal and chemical resistance, making it suitable for a wide range of industrial uses. Choose VESTAKEEP® 5000 P for its superior properties and ease of handling in your projects.

Santicizer® Platinum G-2000 is an efficient bio-based primary plasticizer that offers excellent heat stability, enhanced processability, and lower volatility than traditional General-Purpose Plasticizers. It can be used in techniques such as extrusion, calendaring, injection molding, rotational molding, and spread coating. It can be used in rubbers, epoxy resins, paints and coatings, as well as many other polymers. Santicizer® Platinum G-2000 has earned the U.S. Department of Agriculture (USDA) Certified Biobased Product label.

Lucofin® 1410MB by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Palatal® K775V-02 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used It is available in Liquid form.

MECOSTAT-3/549 is a highly effective liquid, water-based additive for antistatic finishing ofexpandable polystyrene and polypropylene.Due to the fact that the material is not corrosive (content of Chlorides, Sulfates, Nitrates,Phosphates etc. is < 10 ppm), it is well suited for applications in electronic packing.The antistatic agent acts even at a low relative humidity and provides a stable, permanentantistatic finishing for several years.

MECOSTAT-3 surface antistatic agents are highly effective liquid coating materialsfor the antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature guarantees that subsequent thermoformingcan be performed without suffering any damage. Furthermore, the antistatic finishingof the material remains virtually unaffected by the stretching of the material during thethermoforming process.MECOSTAT-3/240 is based on isopropanol solvent. It is very suitable for the applicationon flexographic and gravure printing systems.

SPARKLE SILVET 790-20-P is a coarse polished aluminum pigment with polished cornflake geometry provided in pellet form and consists of 80% aluminum pigment and 20% PMMA carrier. The PMMA carrier is compatible with a variety of engineering resins, but it is not recommended for use with polyolefins. SPARKLE SILVET 790-20-P is suitable for use in both plastics and powder coatings applications.

PETILEN H2-8 is a low density polyethylene resin produced by high pressure autoclave process. The product has medium molecular weight distribution and medium melt flow rate. Developed for general purpose coating and blown film applications, PETILEN H2-8 contains no additives.

Lucofin® 1411-t3 by Lucobit AG is comprised of Polyethylene (unspecified) and Polyethylene Copolymer. It is commonly used It is available in Granules form.

BC 6005 is a snow white thixotropic epoxy resin designed specifically for quality reproduction of a variety of surfaces. A room temperature cure system that offers ample working time yet affords quick-tack for lamination. BC 6005 may be applied easily with a brush or troweled to a thickness of 1/8" or less on vertical surfaces or over sharp radii without sag or fear of run-off. When cured, this resin system provides a hard tough chip-resistant surface.

Lucofin® 1461 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Bio-Flex® F 2110 by FKuR is comprised of Copolyester Resin and Polylactic Acid. It is commonly used It is available in Granules form.

PC - Impact Modified, high tensile strength, stiffness and HDT.

MECOSTAT-3/535 is a highly effective liquid additive for antistatic finishing ofexpandable polystyrene and polypropylene.The antistatic agent acts even at a low relative humidity and provides a stable,permanent antistatic finishing for several years.

Lucofin® 1413-t2 by Lucobit AG is comprised of Polyethylene Copolymer. It is commonly used It is available in Granules form.

Cuts UV rays with a stronger emphasis on functionality. Used in sunscreen lotion, cosmetics, and about 80% of plastic products, UV-protection products are now firmly entrenched in the market, and customers tend to be more conscious of functionality. New possibilities for UV absorbers are being explored to respond to changes in people's needs. We are using our flexible ideas and development capacity to our advantage as we target the development of custom-made UV absorbers that will satisfy and please each and every one of our users.

Atlac® 590 GX34 by Aliancys is comprised of Vinyl Ester Resin. It is commonly used

MECOSTAT-3/09 surface antistatic agent is a highly effective liquid coating material for the antistatic finishing of plastic surfaces as well as for improving slip properties. The coating´s resistance to temperature ensures that subsequent thermoforming can be performed without suffering any damage. Furthermore, the antistatic finishing of the material remains virtually unaffected by the stretching of the material during the thermoforming process.

Shakespeare® HW69SI is a bio-based, medium viscosity PA610 material. This resin is specifically suited for applications requiring low moisture absorption and great dimensional stability. This product is also used in applications requiring good electrical insulation properties and can be processed using conventional techniques.

Lucolit® 1321 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Lucofin® 1414 by Lucobit AG is comprised of Polyethylene Copolymer. It is commonly used It is available in Pellets form.

Lucolit® 1323 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Palatal® A400-01FC by Aliancys is comprised of Polyester (unspecified). It is commonly used It is available in Liquid form.

Shakespeare® terpolymer series are linear polyamide grades with unique solubility characteristics and physical properties. They are compatible with other nylons and are ideal nylon carrier resins for color and functional additives requiring excellent dispersion and high loading. The resins offer improved adhesion to glass and metal surfaces. Selected grades are soluble in alcohol and can be applied by solution coating techniques.

Terralene® LL 1303 by FKuR is comprised of Polyethylene (unspecified). It is commonly used

MECOSTAT-3/225 surface antistatic agent is a highly effective liquid coating material forthe antistatic finishing of plastic surfaces as well as for improving slip properties.Fabrics coated with MECOSTAT-3/225 comply with the certificate class-C for antistaticconductive bags.

Lucolit® 1320 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Granules form.

Melthene® -M M5311 is a Polyolefin material. It is available in Asia Pacific, Europe, or North America for coating, extrusion, or laminating. Primary attribute of Melthene® -M M5311: Good Adhesion.Typical applications include: Fabrics/Fibers Packaging Sealing Applications

Cosmoplene® FC9413L by The Polyolefin Company (TPC) is comprised of Polypropylene (unspecified). It is commonly used

Asrene® UI 2420 is a Linear Low Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Applications of Asrene® UI 2420 include caps/lids/closures, additive/masterbatch, coating applications, consumer goods and household applications.Characteristics include: Good Processability Good Toughness High Flow

MECOSTAT-3 surface antistatic agents are highly effective liquid coating materialsfor the antistatic finishing of plastic surfaces as well as for improving slip properties.The coating´s resistance to temperature guarantees that subsequent thermoformingcan be performed without suffering any damage. Furthermore, the antistatic finishingof the material remains virtually unaffected by the stretching of the material during thethermoforming process.MECOSTAT-3/247 is based on isopropanol solvent. It is very suitable for the applicationon flexographic and gravure printing systems.

Lucofin® 1415 by Lucobit AG is comprised of Polyethylene Copolymer and Thermoplastic Polyolefin Elastomer. It is commonly used It is available in Pellets form.

Nylene Nylon-6 extrusion grade suitable for coating and film co-extrusion applications Excellent melt stability and strength Superior grease resistance, toughness, resistance to abrasion, and does not absorb food odors Meets the requirements of FDA regulation 21 CFR 177,1500 for direct food contact