Automotive & Transportation

26,355 products found in Automotive & Transportation
Applications
Automotive
Transportation
Coatings & Finishes
Lubricants & Functional Fluids
Other Automotive & Transportation Applications
Bonding & Assembly
With TDS
With SDS
Hytrel® 4556 product card banner

DuPont

Hytrel® 4556

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion, Coating

End Uses: Belts/Belt Repair, Hoses, Cosmetic Packaging, Appliances, Crates, Automotive Applications, Containers, Cable Jacketing, Hose Jackets, Film, Sporting Goods, Thermoforming Applications, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1140.0 - 1140.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 87.0 - 87.0 MPa

Hytrel® 4556 is a medium modulus grade with nominal hardness of 45D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.

Betatech™ 2029 product card banner

DuPont

BETATECH™ 2029

Ready to Use Product Type: Conductive Adhesive, 2K (2 component) Adhesive

Application Areas: Batteries

Chemical Family: Polyurethanes (PU)

BETATECH™ 2029 is a two component thermal interface material based on a polyurethane technology with a very high thermal conductivity. BETATECH™ 2029 is based on aluminum trihydroxide fillers that lead to a very high thermal conductivity accompanied by a low density. The material can be efficiently applied and the parts can be joined quickly due to a low press-in force. The material is free of silicones.

Betaseal® Xpress 30 product card banner

DuPont

BETASEAL® Xpress 30

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

BETASEAL® Xpress30 is a single component, high modulus non-conductive adhesive with Reinforced Polyisotropic Micro-network (RPM) technology for high initial green strength that enables rapid crosslinking to speed bonding, allowing faster minimum drive-away times. BETASEAL® Xpress30 is a cold applied, high modulus and non-conductive (enhances vehicle's structural integrity / passenger comfort with reduced road noise, while reducing GPS / phone / HUD / defroster connection interference). BETASEAL® Xpress30 has industry-leading ease of use application, tooling, decking performance, short cut-off string, crash proven 30 minute minimum drive-away time down to 0°F.

Delrin® Sc698 Nc010 product card banner

DuPont

Delrin® SC698 NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent

Flexural Modulus: 3000.0 - 3000.0 MPa

Common features of Delrin® acetal resins include mechanical and physical properties such as high mechanical strength and rigidity, excellent fatigue and impact resistance, as well as resistance to moisture, gasoline, lubricants, solvents, and many other neutral chemicals. Delrin® acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating, and available in a variety of colors and speciality grades. Delrin® acetal resin typically is used in demanding applications in the automotive, domestic appliances, sports, industrial engineering, electronics, and consumer goods industries. Delrin® SC698 NC010 is a lubricated low viscosity acetal homopolymer, developed for high precision thin-walled parts requiring low wear and low friction with excellent surface aspect.

Delrin® 527uv Nc010 product card banner

DuPont

Delrin® 527UV NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 527UV is a UV-stabilized medium viscosity acetal homopolymer developed for applications in automotive interiors. It represents a dramatic improvement over Delrin® 507 in mechanical performance after prolonged UV exposure and thermal stability.

Delrin® 500af product card banner

DuPont

Delrin® 500AF

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Extrusion, Injection Molding

Fillers Included: PTFE, PTFE Fiber

Additives Included: Lubricant (Unspecified), Mold Release Agent

Flexural Modulus: 2500.0 - 2500.0 MPa

Delrin® 500AF is a medium viscosity acetal homopolymer containing 20% Teflon® PTFE fibers. It is designed for applications requiring low wear and/or low friction against steel, itself, or other plastics.Due to the color of the Teflon® PTFE fibers, the natural color of this material is brown.

Zytel® Fr50 Nc010 product card banner

DuPont

Zytel® FR50 NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Lubricant (Unspecified), Flame Retardant

Zytel® FR50 NC010 is a 25% Glass Reinforced, Flame Retardant, Polyamide 66

Modaflow® 9200 product card banner

allnex

MODAFLOW® 9200

Function: Leveling Agent, Flow Promoter

End Uses: Top Coat, Radiation Curable Coating, Clearcoat, Screen Printing Ink, Inkjet Ink, Varnishes, Flexography Ink, Solventborne Coating, Gravure Ink, Lithographic Ink

Labeling Claims: VOC-free, APEO-free, Tin-free

Features: Overbake Resistance, Improved Substrate Wetting, Low Migration, Low Odor, High Gloss, Improved Dullness, Reduced Surface Preparation

Modaflow® 9200 is an acrylic flow modifier, without silicone addition. It improves flow and leveling, substrate wetting, or maintains high gloss and substrate and inter-coat adhesion, and facilitates pigment dispersion.

Anjacom® Pc/abs R050/75s product card banner

Almaak International GmbH

Anjacom® PC/ABS R050/75S

Polymer Name: PC/ABS Alloy

Processing Methods: Injection Molding

Density: 1140.0 - 1140.0 kg/m³

Anjacom® PC/ABS R050/75S by Almaak International GmbH is comprised of Acrylonitrile Butadiene Styrene and Polycarbonate. It is commonly used

Kraton™ Fg1901 G product card banner

Kraton

Kraton™ FG1901 G

Polymer Name: Styrene Ethylene Butylene Styrene (SEBS)

Chemical Family: Styrenic Block Copolymers, Styrenics, Styrene Copolymers

Additives Included: Impact Modifier

Processing Methods: Compounding

Kraton FG1901 G is a clear, linear triblock copolymer based on styrene and ethylene/butylene with a polystyrene content of 30%. It is supplied from North America in the physical form identified below. FG1901 GT - supplied as a dusted pellet Kraton FG1901 G is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.

Molykote® 165 Lt Grease product card banner

DuPont

MOLYKOTE® 165 LT Grease

Ready to Use Product Type: Lubricant, Grease

Application Areas: Gears

Compatible Substrates & Surfaces: Metal

Features: Corrosion Resistant, Good Adhesion, Effective Load Builder, Wear Resistant

Thickener Type: Lithium Complex

MOLYKOTE® 165 LT Gearwheel Grease for the lubrication of highly stressed open gears and reducing gears made of metal, with a peripheral speed of up to 2.5 m/s. Open gears that are subjected to high stresses and bad weather effects. Successfully used in crushing plants and in transmission gears and threaded spindles of heavy, crank-driven presses.

Moldwiz® Int-1e-11s product card banner

Axel

MoldWiz® INT-1E-11S

Function: Processing Aid, Release Agent

Chemical Family: Chemical Mixtures & Blends

Labeling Claims: Other Labeling Claims, Silicone-free, Wax-free

MoldWiz® INT-1E-11S - A process aid additive with surfactant properties which is added directly to the aqueous solution. The addition of this process aid additive gives the resin improved wetting properties of the paper or substrate being impregnated, reducing or eliminating voids and dry spots. The process aid additive will not interfere with adhesion properties between paper laminates. It will function as an excellent release agent causing the laminate to release easily and cleanly from the caul plate without leaving any residue. This product contains no silicone, no wax and no metallic stearates.

Lg™ San 82tr product card banner

LG Chem

LG™ SAN 82TR

Polymer Name: Styrene Acrylonitrile Copolymer (SAN)

Processing Methods: Injection Molding

LG SAN 82TRApplication: Products demanding high transparency such as refrigerator sleeves.Features: SAN from LG chemical has excellent heat resistance,chemical resistance ,mechanical properties, processibility and transparency. SAN resin is widely used for production of eletric/eletronic components,automobile components and household articles.

Betaprime® 5433 product card banner

DuPont

BETAPRIME® 5433

Ready to Use Product Type: Primer

Compatible Substrates & Surfaces: Polycarbonate (PC), Plastics

Features: Improved Adhesion

Chemical Family: Sulfur-based Compounds

BETAPRIME® 5433 is an adhesion-promoting primer for painted and plastic substrates with short and long open time. It is to be used in combination with DuPont Adhesives PUR-Adhesive/sealants. All DuPont Adhesives products are primarily developed in co-operation with the automobile manufacturers, according to their needs and their specifications, they are approved for the specific applications as defined by the customer. The use of the product other than approved appliction have to be released in written form by the Technical Service of DuPont Adhesives.

Thixon® P-11-ef product card banner

DuPont

THIXON® P-11-EF

Ready to Use Product Type: 1K (1 component) Adhesive, Primer

Compatible Substrates & Surfaces: Elastomers & Rubbers, Metal, Steel, Stainless Steel, Aluminum

THIXON® P-11-EF is a vulcanizing adhesive primer used with all MEGUM® or THIXON® cover coat adhesives for bondingmost elastomers to various substrates. It can also be used as a one coat for bonding polar elastomers and will bondmetal substrates including hot and cold rolled steel, stainless steel alloys, brass, aluminum and zinc plated metals. It is a very good general use primer coat for rubber to metal applications. Providing excellent boiling water and salt spray resistance.

Modaflow® Resin product card banner

allnex

MODAFLOW® RESIN

Function: Leveling Agent, Flow Promoter

End Uses: Top Coat, Powder Coating, Radiation Curable Coating, Clearcoat, Screen Printing Ink, Inkjet Ink, Varnishes, Flexography Ink, Solventborne Coating, Gravure Ink, Lithographic Ink

Labeling Claims: VOC-free, APEO-free, Tin-free

Features: Overbake Resistance, Improved Rheology, Improved Degassing, Improved Substrate Wetting, Low Migration, Low Odor, Heat Resistance, High Gloss, Improved Dullness, Reduced Surface Preparation

MODAFLOW® Resin is an acrylic flow modifier without silicone addition. It is used in non-aqueous industrial coatings and powder coatings to improve flow and leveling, reduce pinholes, fisheyes, craters, and orange peel; and to improve substrate wetting. This product also helps maintain or improve substrate adhesion, to defoam and aid in air release, and to facilitate pigment dispersion.

Evolue® Sp1510 product card banner

Prime Polymers

Evolue® SP1510

Polymer Name: Metallocene Linear Low Density Polyethylene (mLLDPE), Linear Low Density Polyethylene (LLDPE)

Processing Methods: Film Extrusion

Melt Flow Index: 1.0 - 1.0 g/10 min

Evolue™ SP1510 is a Linear Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific, Europe, or North America. Applications of Evolue™ SP1510 include film, coating applications and industrial applications.Characteristics include: Good Sealability Impact Resistant

Hytrel® 3078 product card banner

DuPont

Hytrel® 3078

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Blow Molding, Casting, Injection Molding, Compounding, Calendering, Extrusion, Coating

End Uses: Cosmetic Packaging, Appliances, Cables, Automotive Applications, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment, Cast Films

Density: 1070.0 - 1070.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 27.0 - 27.0 MPa

Hytrel® 3078 is a very low modulus grade, with nominal hardness of 30D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Food compliance:Refer to Hytrel® 3078FGTypical applications:Compounding, extrusion, injection molded and over-molded parts for consumer use.

Topas® 8007s-04 product card banner

Polyplastics Group

Topas® 8007S-04

Polymer Name: Cyclic Olefin Copolymer (COC)

Processing Methods: Injection Molding

TOPAS® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade TOPAS® 8007S-04TOPAS® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer

Heraform® R900 Nat product card banner

Radici Group

Heraform® R900 NAT

Polymer Name: Polyacetal Copolymer (POM)

Processing Methods: Injection Molding

Heraform® R900 NAT is a POM Acetal copolymer. Standard grade for injection molding of details with high mechanical requirement. Natural colourISO 1043 : POM.

Delrin® 500p Bk602 product card banner

DuPont

Delrin® 500P BK602

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3000.0 - 3000.0 MPa

Delrin® 500P is a general purpose medium viscosity acetal homopolymer for injection molding. It has improved processing thermal stability, and a good combination of mechanical properties.

Zytel® Fr7026v0f Nc010 product card banner

DuPont

Zytel® FR7026V0F NC010

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Mold Release Agent, Flame Retardant

Zytel® FR7026V0F NC010 is a flame retardant, heat stabilized, polyamide 66 resin for injection molding. It does not contain elemental phosphorous or heavy metals and uses an halogen free flame retardant package.

Paracril™ 3350 product card banner

Dynasol Elastomers

Paracril™ 3350

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

End Uses: O Rings, Footwear, Hoses, Automotive Applications, Tires

Features: Low Temperature Flexibility, Oil Resistant, Good Processability, Fast Curing

Paracril 3350 is a copolymer of butadiene and acrylonitrile, cold polymerized with a non-staining stabilizer.

Radilon® Bgv 30 Natural product card banner

Radici Group

Radilon® BGV 30 Natural

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Radilon® BGV 30 Natural is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America.Important attributes of Radilon® BGV 30 Natural are: Flame Rated Heat Resistant

Thixon® Osn-2-ef product card banner

DuPont

THIXON® OSN-2-EF

Ready to Use Product Type: 2K (2 component) Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Brass, Elastomers & Rubbers, Aluminum, Metal, Steel, Polyamide, Plastics

THIXON® OSN-2-EF is a general purpose one-coat adhesive used for bonding various elastomers to metals, such as hot and cold rolled steel, stainless steel alloys, brass, aluminum, and zinc plated metals._x005F THIXON® OSN-2-EF bonds Natural Rubber (NR), Polybutadiene (BR), Polyisoprene (IR), Styrene Butadiene Rubber (SBR), Chloroprene (CR) and Polyacrylate (ACM)._x005F THIXON® OSN-2-EF is also used for post-vulcanization bonding. In addition, THIXON® OSN-2-EF bonds rubber to synthetic fibers such as rayon and polyester. It is a good general purpose rubber to substrate bonding agent that can be used as single coat or two coat system. The use of a ROBOND, THIXON® or MEGUM® primer or a two coat system will provide the best environmental resistance, however THIXON® OSN-2-EF does quite well as a stand alone coating in many general rubber to metal bonding situations.

Delrin® 577 Bk000 product card banner

DuPont

Delrin® 577 BK000

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent

Flexural Modulus: 4600.0 - 4600.0 MPa

Delrin® 577 is a medium viscosity acetal homopolymer (Polyoxymethylene POM) containing 20% glass fiber filler for injection molding. It has very high stiffness, low warpage, and good creep resistance for superior performance at elevated temperature. It contains carbon black for improved weathering.

Hytrel® 8238 product card banner

DuPont

Hytrel® 8238

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Film Extrusion, Thermoforming, Casting, Injection Molding, Extrusion

End Uses: Cast Films, Gears, Hoses, Cosmetic Packaging, Appliances, Pipes, Cables, Automotive Applications, Corrugated Pipe, Connectors, Monofilaments, Cable Jacketing, Film, Sporting Goods, Thermoforming Applications, Wires, Tubing, Electrical/Electronic Applications, Office Automation Equipment

Density: 1280.0 - 1280.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 1150.0 - 1150.0 MPa

Hytrel® 8238 is the highest modulus grade, with nominal hardness of 82D. It contains non-discoloring stabilizer. It can be processed by many conventional thermoplastic processing techniques like injection molding and extrusion.Typical applications:Cubing, wire and cable, gears, sprockets, electrical connectors and oil field parts.

Arlon® 35n product card banner

Arlon Electronic Materials

Arlon® 35N

Polymer Name: Polyimide (PI)

Function: Laminate, Prepreg

End Uses: PCB Materials

35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg (250°C) results in low Z-direction expansion for resistance to PTH failure during PWB processing, and minimizes risk of latent PTH defects in-service. Reduced temperature and time to cure offers improved throughput compared to traditional polyimide cycles.

Betaseal® 1766 Eu product card banner

DuPont

BETASEAL® 1766 EU

Ready to Use Product Type: Solvent free (100% Solids) Adhesive, Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Painted Surfaces, Glass

Cure Method: Moisture Cure

Application Method: Pneumatic Gun

Chemical Family: Polyurethanes (PU)

BETASEAL® 1766 EU is a high viscosity, high modulus, glass bonding adhesive that can be used primerless to paint and glass. Due to its chemistry, it delivers a high initial handling strength to hold the position of the bonded parts. It is a one component, ambient moisture curing, solvent free adhesive for direct glazing applications. It shows excellent sag and bead stability. Skin formation and curing are dependent on humidity, temperature and application dimension.

Thixon® 715-ef&b product card banner

DuPont

THIXON® 715-EF&B

Ready to Use Product Type: 1K (1 component) Adhesive, 2K (2 component) Adhesive

Compatible Substrates & Surfaces: Metal, Plastics, Polyurethane, Elastomers & Rubbers, Acrylic

THIXON® 715-EF&B by DuPont is commonly used as Bonding Adhesive for a variety of applications in Industrial and Automotive.

Delrin® 111pa Nc010 product card banner

DuPont

Delrin® 111PA NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Flexural Modulus: 2900.0 - 2900.0 MPa

Delrin® 111PA NC010 is a Nucleated High Viscosity Acetal Homopolymer.

Molykote® 7 Release Compound product card banner

DuPont

MOLYKOTE® 7 Release Compound

Ready to Use Product Type: Industrial Lubricants

Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics

Features: Wide Temperature Operating Range, Food Contact Acceptable, Electrically Insulating, Excellent Moisture Resistance, Oxidation Resistant

Chemical Family: Silicones

MOLYKOTE® 7 Release compound is a Dimethyl silicone compound for a variety of lubrication and protection applications. It can be used in applications including mold release agent for foundry shell and core molds. Break-in treatment for bladders on tire presses, rubber lubricant and preservative. Release agent for adhesives and glues. Cable pulling lubricant to draw rubber-covered cable through conduit. Release agent for plastic extruders and processing equipment and release agent for plastic film packaging machines.

Thixon® 423 Clear product card banner

DuPont

THIXON® 423 Clear

Ready to Use Product Type: 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Metal, Plastics, Epoxies, Polyurethane, Polyesters

THIXON® 423 Clear is a vulcanizing adhesive which can be used as a one-coat adhesive or as a covercoat adhesive over THIXON®403/404 adhesive primer for bonding castable polyurethane to various substrates.THIXON®423 can also be used as a one-coat adhesive for bonding thermoplastic polyurethanes to metal. THIXON®423 can also be used as a protective coating for metal, polyurethane, epoxy, polyester and fiberglass compounds. It is a good one-coat system for thermoplastic urethane to metal bonding with better heat resistance that THIXON® 405.

Thixon® 2001-ef product card banner

DuPont

THIXON® 2001-EF

Ready to Use Product Type: 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Elastomers & Rubbers, Polyolefins, Metal, Plastics

Application Method: Roll Coater, Brush

THIXON® 2001-EF is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied cover THIXON® P-11-EF or THIXON® P-6-EF adhesive primers. It bonds with a wide variety of elastomers, including natural rubber, SBR, chloroprene, EPDM, butyl and nitrile.THIXON® 2001-EF is formulated at the proper viscosity and solids content to give the desired dry film thickness for maximum bonding in one coat brushing or roller coat applications. It is a vulcanizing adhesive that can be used as a one-coat adhesive or as a two-coat system applied over THIXON® P-11-EF or P-6-EF adhesive primers. THIXON® 2001-EF represents the highest reactivity of any of the cover coat adhesives in our product line and is used to pick up difficult to bond rubber compounds

Delrin® Fg911dp Nc010 product card banner

DuPont

Delrin® FG911DP NC010

Polymer Name: Polyacetal Homopolymer (POM)

Processing Methods: Injection Molding, Extrusion

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 3300.0 - 3300.0 MPa

Delrin® FG911DP is a low viscosity acetal homopolymer with enhanced crystallization for faster cycle times and excellent creep and fatigue resistance. It has improved thermal stability, excellent dimensional stability, low warpage, and fewer voids. It has been developed for applications in contact with food.

Kalrez® 6230 product card banner

DuPont

Kalrez® 6230

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: Black

Kalrez® 6230/6230A* perfluoroelastomer parts are a black product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6230/6230A parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez° 6230/6230A parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability.