Automotive & Transportation

26,355 products found in Automotive & Transportation
Applications
Automotive
Transportation
Coatings & Finishes
Lubricants & Functional Fluids
Other Automotive & Transportation Applications
Bonding & Assembly
With TDS
With SDS
Zytel® 70g30hslr Bk099 product card banner

DuPont

Zytel® 70G30HSLR BK099

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Lubricant (Unspecified)

Flexural Modulus: 9000.0 - 9000.0 MPa

Zytel® 70G30HSLR BK099 is a 30% glass fiber reinforced, heat stabilized, hydrolysis-resistant polyamide 66 resin for injection molding.

Hytrel® 5526 product card banner

DuPont

Hytrel® 5526

Polymer Name: Thermoplastic Copolyester Elastomer (TPC-ET)

Processing Methods: Thermoforming, Injection Molding

End Uses: Cosmetic Packaging, Appliances, Thermoforming Applications, Automotive Applications, Electrical/Electronic Applications, Office Automation Equipment, Bearings

Density: 1190.0 - 1190.0 kg/m³

Strain at Break: 300.0 - 300.0 %

Flexural Modulus: 200.0 - 200.0 MPa

Hytrel® 5526 is a medium modulus Hytrel® grade with nominal durometer hardness of 55D. It contains non-discoloring stabilizer. It is specially recommended for injection molding applications requiring high flow properties.Typical applications:Seals, packing and gaskets; gears and bearings.

Crastin® Hr5330hfs Bk591 product card banner

DuPont

Crastin® HR5330HFS BK591

Polymer Name: Polybutylene Terephthalate (PBT), Thermoplastic Polyester

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Mold Release Agent, Impact Modifier, Hydrolysis Stabilizer

Crastin® HR5330HFS BK591 is a 30% Glass Reinforced Polybutylene Terephthalate with high flow, moderately toughened, and hydrolysis-resistant (HR) for injection molding.

Cycat® 4045 Catalyst product card banner

allnex

CYCAT® 4045 Catalyst

Function: Catalyst

CYCAT® 4045 Catalyst is an amine blocked para-toluene sulfonic acid catalyst. It is recommended for accelerating the cure response of amino crosslinking resins while providing improved formulation package stability compared with the un-blocked para-toluene sulfonic acid CYCAT 4040 catalyst. It is especially recommended for use with highly alkylated amino crosslinking resins. This product provides excellent stability in high solids and waterborne systems, and in the latter it can be added without causing binder precipitation, which can often occur due to a drop in pH.

Setalux® 1385 Bx-51 product card banner

allnex

SETALUX® 1385 BX-51

Chemical Family: Acrylics & Acrylates

End Uses: Solventborne Coating, Base Coat, 1K (1 component) Coating, 2K (2 component) Coating, Solventless & High Solids Coating

Compatible Substrates & Surfaces: Metal

Features: High Pigment Loading, Low Temperature-Curing, Good Metal Flake Orientation

SETALUX® 1385 BX-51 is a thermosetting hydroxylated acrylic copolymer. Good compatibility with cellulose aceto-butyrate resins.

Ligalub 55 Pe product card banner

Peter Greven Nederland C.V.

LIGALUB 55 PE

Function: Lubricant (Internal)

Compatible Polymers & Resins: Polyvinyl Chloride (PVC), Polyethylene Terephthalate (PET), Acrylonitrile Butadiene Styrene (ABS), Polypropylenes (PP), Polyethylenes (PE), Polycarbonates (PC), Polyamides, Polybutylene Terephthalate (PBT), Poly(Methyl Methacrylate) (PMMA)

End Uses: Bottles, Cups, Caps, Cosmetic Packaging, Rigid Packaging, Rigid Films, Closures

Trirex® 3025u product card banner

Samyang Corporation

TRIREX® 3025U

Polymer Name: Polycarbonate (PC)

Processing Methods: Injection Molding

Additives Included: UV Stabilizer

Flexural Modulus: 23000.0 - 23000.0 MPa

TRIREX is the registered trademark of polycarbonate resin manufactured by Samyang Corporation. TRIREX polycarbonate resins offer superior mechanical properties, good dimensional stability and high electrical performance, which allows it to be widely used for electrical, electronic, appliance, automotive and optical industries. TRIREX 3025U is a UV stabilized polycarbonate resin grade which has a low melt viscosity and transparency in combination with superior physical properties. CHARACTERISTICS High ultraviolet(UV) stability High flowability Good impact resistance Workable under a wide range of temperatures (-100 ? ~ 135 ?) High electrical performance Good dimensional stability Excellent transparency Low moisture absorbency Good weather resistance APPLICATIONS TRIREX 3025U resin grade is used in out-door applications such as electric meter cover, window panes, sing board, wind break, signal lamps, and ship lights etc.

Betamate® 6120 product card banner

DuPont

BETAMATE® 6120

Ready to Use Product Type: Epoxy Adhesive, Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Aluminum, Metal, Steel

Cure Method: Heat Cure

Chemical Family: Epoxy & Epoxy Derivatives

BETAMATE® 6120 is a one-component, heat-curing, epoxy-based adhesive developed especially for body shop applications. It has excellent adhesion for metal substrate (aluminum and steel) applications. BETAMATE® 6120 has excellent adhesion for aluminum bonding with excellent stress durability, high sag resistance, high wash off resistance and exceptionally high -40°C peel strength. Typical applications include bonding of the vehicle body structure and closure hem flange applications.

Kalrez® 6221 product card banner

DuPont

Kalrez® 6221

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals, O-rings

Features: Low Contamination From Extractables, Chemical Resistant, Good Steam Cycling Resistance

End Uses: Semiconductor Applications, O Rings

Color: White

Kalrez® 6221 perfluoroelastomer parts are a white product that provide superior chemical resistance and low contamination from extractables in pharmaceutical and food handling applications where FDA compliance is required. Kalrez® 6221 parts are especially suited for Water for Injection (WFI) systems, Steam-in-Place (SIP) cleaning and other critical systems. Kalrez® 6221 parts are thermally stable up to 260°C (500°F), permitting them to be used in Stage II Sterilization processes, where other elastomers lose their sealing ability. Kalrez® 6221 is available as O-rings. For white custom parts, please refer to Kalrez® LS205 parts.

Kalrez® Spectrum™ 7375 product card banner

DuPont

Kalrez® Spectrum™ 7375

Polymer Name: Perfluoroelastomer (FFKM)

Physical Form: Seals

Features: Good Compressive Strength, Good Mechanical Properties, Good Retention of Properties

End Uses: Semiconductor Applications, Pump Parts

Color: Black

Kalrez® Spectrum™ 7375 perfluoroelastomer parts are an innovative FFKM product based on a patented crosslinking system for chemical process industry applications where broad chemical and water/steam resistance are needed at elevated temperatures. Kalrez® Spectrum™ 7375 parts exhibit excellent compression set resistance, outstanding physical property retention, and good mechanical strength properties. A maximum application temperature of 300°C is suggested.

Nipol® Br 1250h product card banner

ZEON Corporation

Nipol® BR 1250H

Polymer Name: Polybutadiene Rubber (BR)

Processing Methods: Extrusion, Injection Molding

Additives Included: Antioxidant

End Uses: Conveyor Parts, Footwear, Tires, Belts/Belt Repair

Features: Low Temperature Resistant, Anti-Oxidant, Abrasion Resistant

Nipol BR affords excellent abrasion resistance, low temperature resistance, and heating characteristics, as well as high rebound resilience. There are two types of Nipol BR-high cis-BR and low cis-BR-with different levels of cis-1,4 content, which can be selected according to the specific application. When combined with other rubbers, such as natural rubber, SBR, and NBR, Nipol BR provides and improves low-temperature performance and other characteristics, the inherent features of Nipol BR, while maintaining each rubber's unique properties. Nipol BR is widely used and has proved satisfactory in a variety of manufacturing processes for such products as tires, footwear, vibration-insulating rubber, and high impact polystyrene.UsesAuto tires, bicycle tires, aircraft tires, tire treads, camelback, conveyor belts, V-belt, packings, seals, footwear, coated fabrics, molded and extruded mechanical goods.

Betaseal® 15700 product card banner

DuPont

BETASEAL® 15700

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Chemical Family: Polyurethanes (PU)

BETASEAL® 15700 is a primerless to paint, one-component urethane adhesive.

Thixon® P-11 product card banner

DuPont

THIXON® P-11

Ready to Use Product Type: 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Polyesters, Elastomers & Rubbers, Acrylic, Polyamide, Metal, Plastics

THIXON® P-11 is a solvent-based primer, used in combination with MEGUM® or THIXON® cover coats. THIXON® P-11 can also be used as a one-coat adhesive for the bonding of polar elastomers (NBR, AEM, ACM). COMPOSITION: THIXON® P-11 consists of reactive polymers and pigments in methyl isobutyl ketone (MIBK). It is formulated without reportable levels of lead or other toxic heavy metals. ENVIRONMENTAL RESISTANCE: Rubber-to-metal bonding systems using THIXON® P-11 display resistance to severe environmental exposures such as humidity and corrosion. Properly prepared bonds will also resist heat, salt fog, oil and water exposures.

Betaseal® 8000-1f product card banner

DuPont

BETASEAL® 8000-1F

Ready to Use Product Type: Structural Adhesive, 1K (1 component) Adhesive

Compatible Substrates & Surfaces: Glass

Cure Method: Moisture Cure

Chemical Family: Polyurethanes (PU)

BETASEAL® 8000-1F is a one-component, moisture-curing adhesive with excellent sag and bead stability based on polyurethane chemistry. The adhesive cures with environmental moisture and skin formation. The curing is dependent on humidity, temperature and application dimensions._x005F _x005F BETASEAL® 8000-1F is a cold processable, medium viscosity, low modulus adhesive with excellent UV stability attributes. It is primerless to paint on automotive paints.

Cymel® 303 Lf Resin product card banner

allnex

CYMEL® 303 LF Resin

Function: Crosslinking Agent

Compatible Polymers & Resins: Alkyds, Polyesters, Acrylics, Epoxies (EP)

End Uses: Waterborne Coating

CYMEL® 303 LF resin is a highly methylated, monomeric melamine crosslinker supplied in liquid form. Its high extent of alkylation and low tendency to self-condense makes this product a highly effective crosslinking agent for a broad range of applications such as can, container, automotive and general industrial coatings. While CYMEL® 303 LF resin is insoluble in water, it shows excellent compatibility with water-soluble backbone polymers and provides very good stability in amine-stabilized waterborne formulations.

Polygloss® 90 product card banner

KaMin LLC

Polygloss® 90

Function: Filler

Chemical Family: Cellulose & Cellulosics, Kaolins

End Uses: Screen Printing Ink, Waterborne Coating, Gelcoat, Waterborne Ink

Particle Size: 0.4 - 0.4 microns

Oil Absorption: 42.0 - 42.0 g/100 g

Ultrafine, highly pulverized, premium brightness kaolin for extending high gloss solvent and water-based coatings.

Dytek® Bhmt-hp product card banner

INVISTA

Dytek® BHMT-HP

Chemical Name: Bis(hexamethylene)triamine

Function: Binder, Emulsifier, Chelating Agent, Catalyst, Corrosion Inhibitor, Intermediate, Flocculant, Curing Agent

CAS Number: 143-23-7

Chemical Family: Triamines, Amines

DYTEK® BHMT HP (bis-hexamethylene triamine) is a high purity (>95%) triamine that is used in applications where purity is critical such as phosphonate scavenger and flocculant in oil & gas applications and as a hardener in epoxy coating and adhesive applications.

Leona™ 1402s product card banner

Asahi Kasei Corporation

Leona™ 1402S

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Heat Stabilizer

Flexural Modulus: 2800.0 - 2800.0 MPa

Leona™ 1402S is a Polyamide 66 (Nylon 66) product. It is available in Africa & Middle East, Asia Pacific, Europe, or North America. Applications of Leona™ 1402S include automotive, consumer goods, electrical/electronic applications and wire & cable.Characteristics include: Flame Rated Good Stiffness Good Toughness Heat Stabilizer

Radilon® A Rv300 100 Nat product card banner

Radici Group

Radilon® A RV300 100 NAT

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Radilon® A RV300 100 NAT is a PA66 30% glass fiber reinforced injection molding grade. Suitable for parts requiring high stiffness and good mechanical resistance.

Multilon® T-2711j product card banner

Teijin Limited

Multilon® T-2711J

Polymer Name: PC/ABS Alloy

Processing Methods: Injection Molding

Density: 1140.0 - 1140.0 kg/m³

Flexural Modulus: 2300.0 - 2300.0 MPa

PC/ABS polymer alloy, Automotive series

Divinycell® F50 product card banner

Diab

Divinycell® F50

Function: Core Material

Core Type: Thermoplastic Foam

Chemical Family: Sulfonates, Sulfonic Acids & Derivatives

Divinycell F50 foam is a recyclable, prepreg compatible sandwich core offering excellent Fire, Smoke and Toxicity (FST) properties, good mechanicals and processing characteristics. It meets the US and European regulatory requirements for commercial aircraft interiors. Other key features include vacuum bag processing up to 220°C and matched tooling and press processing up to 220°C, exceptional fatigue life, good chemical resistance and excellent heat aging at 180°C. Divinycell F50 is compatible with most common aerospace composite manufacturing processes.

Molykote® 111 Compound product card banner

DuPont

MOLYKOTE® 111 Compound

Chemical Family: Silicones

Ready to Use Product Type: Sealer

Application Areas: Electrical Components, Gaskets, Valves, Seals

Application Method: Brush, Dip Coating, Wipe, Spray

Compatible Substrates & Surfaces: Elastomers & Rubbers, Plastics

MOLYKOTE® 111 Compound is used as a valve lubricant and sealant.

Molykote® Sh 44 Mt Grease product card banner

DuPont

MOLYKOTE® SH 44 MT Grease

Ready to Use Product Type: Grease

Application Areas: Kilns, Bearings, Chain Conveyors

Compatible Substrates & Surfaces: Elastomers & Rubbers

Features: Low Evaporation, High Temperature Resistance, Oxidation Resistant, Corrosion Resistant, Wide Temperature Operating Range, Excellent Lubricity

Chemical Family: Silicones, Lithium Complexes

Thickener Type: Lithium Complex

MOLYKOTE® SH 44 MT Grease is high-temperature silicone grease for bearings.

Zytel® 73g30hsl Bk416 product card banner

DuPont

Zytel® 73G30HSL BK416

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 8500.0 - 8500.0 MPa

Zytel® 73G30HSL BK416 is a 30% glass fiber reinforced, heat stabilized polyamide 6 for injection molding.

Cymel® 385 Resin product card banner

allnex

CYMEL® 385 Resin

Function: Crosslinking Agent

End Uses: Top Coat

CYMEL® 385 resin is a methylated high imino melamine resin with a low degree of alkylation. Being supplied in water, it is recommended as a crosslinking agent for hydroxyl-containing emulsion polymers and other aqueous systems containing hydroxyl or amide functionality. It has a high tendency to self-condense and may be used to increase the hardness and resistance properties of thermoplastic waterborne polymers.

Nipol® Ns612 product card banner

ZEON Corporation

Nipol® NS612

Polymer Name: Acrylonitrile Butadiene Rubber (NBR)

End Uses: Tires

NIPOL Solution Polymerization-Type ElastomersSpecial Properties/ApplicationsBest performance for silica application. Low styrene type for all-season tires.

Frianyl® A3 Rv0 product card banner

Nilit

Frianyl® A3 RV0

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Heat Stabilizer, Flame Retardant

FRIANYL® A3 RV0 is an unfilled Polyamide 66 (Nylon 66) compound, heat stabilized, flame retardant, halogen and red phosphorous free, UL listed V0.It is VDE certified. It is also certified according to railways requirements EN45545-2 and NFF 16-101.This compound is intended for injection molding.FRIANYL® A3 RV0 is primarily designed for the Electrical and Electronic industry. It is also suitable for Automotive or Industrial & Consumer applications.

Clearflex® Cl B0 product card banner

Versalis - A subsidiary of Eni S.p.A

Clearflex® CL B0

Polymer Name: Linear Low Density Polyethylene (LLDPE)

Processing Methods: Film Extrusion

Additives Included: Antioxidant

Melt Flow Index: 3.0 - 3.0 g/10 min

Clearflex® CL B0 is a linear low density polyethylene, with antioxidants, characterized by a very low density (VLDPE).The resin has a high stretchability and a good cling effect.Main ApplicationClearflex CL B0 is recommended for applications in which soft touch and flexibility are required, for the improvement of impact resistance when used as additive in blend with other polyolefins formulated with or without mineral fillers. Clearflex CL B0 is also used as cling agent in stretch film.

Aegis® H100np product card banner

AdvanSix

Aegis® H100NP

Polymer Name: Polyamide 6 (PA 6)

Processing Methods: Extrusion, Film Extrusion, Thermoforming, Cast Film Extrusion, Blown Film Extrusion

Aegis® H100NP resin is a medium-viscosity nylon 6 extrusion grade homopolymer for cast or blown film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Zytel® Htn51g35ef Bk083 product card banner

DuPont

Zytel® HTN51G35EF BK083

Polymer Name: Polyphthalamide (PPA), Polyamide 6T/XT (PA 6T/XT)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Flexural Modulus: 11000.0 - 11000.0 MPa

Zytel® HTN51G35EF BK083 is a 35% glass-reinforced, heat stabilized, lubricated, hydrolysis-resistant high performance polyamide resin developed for electrical and electronics applications. It is also a PPA resin.

Zytel® 73g40t Nc010 product card banner

DuPont

Zytel® 73G40T NC010

Polymer Name: Polyamide 6 (PA 6)

Fillers Included: Glass Fiber

Zytel® 73G40T NC010 is a 40% Glass Reinforced, Toughened, Polyamide 6

Elix™ Abs H801 product card banner

ELIX Polymers, S.L.

Elix™ ABS H801

Polymer Name: Acrylonitrile Butadiene Styrene (ABS)

Processing Methods: Injection Molding

Melt Flow Index: 6.0 - 6.0 g/10 min

High heat resistance, PC-modified, low emission, increased flow. Typical Applications: Radiator grille, Rear light housing, Tailgate cover, Door components, Instrument panel parts.

Kraton™ D4150 K product card banner

Kraton

Kraton™ D4150 K

Polymer Name: Styrene Butadiene Styrene (SBS)

Chemical Family: Styrenic Block Copolymers, Styrenics

Processing Methods: Coating, Compounding

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

Duracon® Nw-02 product card banner

Polyplastics Group

Duracon® NW-02

Polymer Name: POM/PE Alloy

Processing Methods: Injection Molding

Density: 1360.0 - 1360.0 kg/m³

Flexural Modulus: 2200.0 - 2200.0 MPa

Tensile Strength: 52.0 - 52.0 MPa

DURACON® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated

Radilon® A Hsk 372 M Ner product card banner

Radici Group

Radilon® A HSK 372 M NER

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Heat Stabilizer

Radilon® A HSK 372 M NER is a PA66 injection molding grade. Internally lubricated, fast cycles, easy mold release. Suitable for high productivity applications like fasteners, connectors, cable ties.

Durez™ 00118 product card banner

Sumitomo Bakelite Company

Durez™ 00118

Polymer Name: Phenolic Compound, Phenol Formaldehyde (PF)

Processing Methods: Transfer Molding, Injection Molding, Compression Molding

End Uses: General Purpose, Automotive Applications, Electrical/Electronic Applications

Density: 1400.0 - 1400.0 kg/m³

Tensile Strength: 48.0 - 48.0 MPa

Durez™ 00118 by Sumitomo Bakelite Company is comprised of Phenolic Compound. It is commonly used Durez™ 00118 is certified as UL Flame Rated. It is available in Granules form.